A new modelling approach based on binary model and X-FEM to investigate the mechanical behaviour of textile reinforced composites

CMES - Computer Modeling in Engineering and Sciences

Volumn 42, Issue 1, 2009, Pages 35-57

  Haasemann, G ^a   Kastner M ^a   Ulbricht, V ^a  

^a NONE

Author keywords

Binary Model; Composite materials; Homogenisation method; X FEM

Indexed keywords

BINARY MODEL; BINARY MODELS; COMPLEX GEOMETRIES; DEGREES OF FREEDOM; EFFECTIVE MATERIAL PROPERTY; ELASTIC MATERIAL PROPERTIES; EXPERIMENTAL TEST; EXTENDED FINITE ELEMENT METHOD; FINITE ELEMENT; HOMOGENISATION; HOMOGENISATION METHOD; INTERNAL ARCHITECTURE; MECHANICAL BEHAVIOUR; PERIODIC BOUNDARY CONDITIONS; TEXTILE-REINFORCED COMPOSITES; X-FEM;

COMPOSITE MATERIALS; COMPOSITE MICROMECHANICS; HOMOGENIZATION METHOD; RESINS; TEXTILES;

FINITE ELEMENT METHOD;

EID: 67649979012     PISSN: 15261492     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (30)

1. Altenbach, H.; Altenbach, J.; Rikards, R. (1996): Einführung in die Mechanik der Laminat- und Sandwichtragwerke. Deutscher Verlag für Grundstoffindustrie Stuttgart.
2. Carter, W.; Cox, B.; Fleck, N. (1994): A binary model of textile composites -I. Formulation. Acta, metall. mater., vol. 42, no. 10, pp. 3463-3479.
3. Chirputkar, S. U.; Qian, D. (2008): Coupled atomistic/continuum simulation based on extended space-time finite element method. CMES: Computer Modeling in Engineering & Sciences, vol. 24, no. 3, pp. 185-202.
4. Cox, B.; Dadkhah, M. (1995): The macroscopic elasticity of 3D woven composites. J. Compos. Mater., vol. 29, no. 6, pp. 785-819.
5. Dang, T. D.; Sankar, B. V. (2008): Meshless local Petrov-Galerkin micromechanical analysis of periodic composites including shear loadings. CMES: Computer Modeling in Engineering & Sciences, vol. 26, no. 3, pp. 169-187.
6. Galli, M.; Botsisb, J.; Janczak-Rusch, J. (2008): An elastoplastic three-dimensional homogenization model for particle reinforced composites. Comp. Mater. ScL, vol. 41, no. 3, pp. 312-321.
7. Haasemann, G. (2003): An application of the binary model to dynamic finite element analysis. Proc. Appl. Math. Mech., vol. 3, no. 1, pp. 176-177.
8. Haasemann, G. (2008): Effektive mechanische Eigenschaften von Verbundwerk- stoffen mit Biaxialgestrickverstarkung. PhD thesis, TU Dresden, 2008. TUDpress, ISBN 978-3-941298-01-9.
9. Haasemann, G.; Kästner, M.; Ulbricht, V. (2006): Multi-scale modelling and simulation of textile reinforced materials. CMC: Computers, Materials & Con- tinua, vol. 3, no. 3, pp. 131-146.
10. Hagihara, S.; Tsunori, M.; Ikeda, T.; Miyazaki, N. (2007): Application of meshfree method to elastic-plastic fracture mechanics parameter analysis. CMES: Computer Modeling in Engineering & Sciences, vol. 17, no. 2, pp. 63-72.
11. Hill, R. (1963): Elastic properties of reinforced solids: Some theoretical principles. Journal of the Mechanics and Physics of Solids, vol. 11, no. 5, pp. 357-372.
12. Hollister, S. J.; Kikuchi, N. (1992): A comparison of homogenization and standard mechanics analyses for periodic porous composites. Computational Mechanics, vol. 10, no. 2, pp. 73-95.
13. Huang, S.-J.; Chiu, L.-W. (2008): Modeling of structural sandwich plates with 'through-the-thickness' inserts: Five-layer theory. CMES: Computer Modeling in Engineering & Sciences, vol. 34, no. 1, pp. 1-32.
14. Kästner, M.; Haasemann, G.; Brummund, J.; Ulbricht, V. (2008): Computation of effective stiffness properties for textile-reinforced composites using X-FEM, chapter 13, pp. 261-279. Springer, 2008.
15. Kästner, M.; Ulbricht, V. (2006): Homogenization of fibre composites using X-FEM. Proc. Appl. Math. Mech., vol. 6, no. 1, pp. 489-490.
16. Liu, D.; Chen, C; Chiou, D. (2005): 3-d modeling of a composite material reinforced with multiple thickly coated particles using the infinite element method. CMES: Computer Modeling in Engineering & Sciences, vol. 9, no. 2, pp. 179-192.
17. Long, S.; Liu, K.; Li, G. (2008): An analysis for the elasto-plastic fracture problem by the meshless local Petrov-Galerkin method. CMES: Computer Modeling in Engineering & Sciences, vol. 28, no. 3, pp. 203-216.
18. McGlockton, M.; Cox, B.; McMeeking, R. (2003): A binary model of textile composites: III. high failure strain and work of fracture in 3D weaves. J. Mech. Phys. Solids., vol. 51, no. 8, pp. 1573-1600.
19. Melenk, J. M.; Babuska, I. (1996): The partition of unity finite element method: Basic theory and applications. Computer Methods in Applied Mechanics and Engineering, vol. 139, no. 1-4, pp. 289-314.
20. Moës, N.; Cloirec, M.; Cartraud, P.; Remade, J.-F. (2003): A computational approach to handle complex microstructure geometries. Comput. Method. Appl. M., vol. 192, pp. 3163-3177.
21. Moës, N.; Dolbow, J.; T., B. (1999): A finite element method for crack growth without remeshing. Int. J. Numer. Meth. Engng., vol. 46, pp. 131-150.
22. Pahr, D. H.; Böhm, H. (2008): Assessment of mixed uniform boundary conditions for predicting the mechanical behavior of elastic and inelastic discontinuously reinforced composites. CMES: Computer Modeling in Engineering & Sciences, vol. 24, no. 2, pp. 117-136.
23. Pierard, O. (2006): Micromechanics of inclusion-reinforced composites in elasto-plasticity and elasto-viscoplasticity:modeling and computation. PhD thesis, Université Catholique de Lou vain, 2006.
24. Rolfes, R.; Ernst, G.; Hartung, D.; Teßmer, J. (2006): Strength of textile composites - a voxel based continuum damage mechanics approach. In Computational Mechanics: Solids, Structures and Coupled Problems, pp. 497-520. Springer.
25. Skudra, A.; Bulavs, E; Rocens, K. (1975): Kriechen und Zeitstandverhalten verstärkter Plaste. VEB Deutscher Verlag für Grundstoffindustrie.
26. Stazi, F.; Budyn, E.; Chessa, J.; Belytschko, T. (2003): An extended finite element method with higher-order elements for curved cracks. Comp. Mech., vol. 31, no. 1-2, pp. 38-48.
27. Takashima, S.; Nakagaki, M.; Miyazaki, N. (2007): An elastic-plastic constitutive equation taking account of particle size and its application to a homogenized finite element analysis of a composite material. CMES: Computer Modeling in Engineering & Sciences, vol. 20, no. 3, pp. 193-202.
28. Ulbricht, V.; Kästner, M.; Lichtneckert, T.; Brummund, J.; Modler, K.-H.; Hufenbach, W.; Bohm, R.; Ebert, C; Griiber, B.; Langkamp, A.; Lepper, M. (2008): Modelling of the effective material behavior of textile reinforced composites. Journal of Plastics Technology, vol. 4, pp. 1-30.
29. Wang, S.; Lim, K.; Khoo, B.; Wang, M. (2007): A geometric deformation constrained level set method for structural shape and topology optimization. CMES: Computer Modeling in Engineering & Sciences, vol. 18, no. 3, pp. 155-181.
30. Xu, J.; Cox, B.; McGlockton, M.; Carter, W. (1995): A binary model of textile composites-II. The elastic regime. Acta Metallurgica et Materialia, vol. 43, no. 9, pp. 3511-3524.