Chapter 1 Breakage of Single Particles: Quasi-Static

Handbook of Powder Technology

Volumn 12, Issue , 2007, Pages 3-68

  Tavares, Luís Marcelo ^a  

^a FEDERAL UNIVERSITY OF RIO DE JANEIRO   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 67649807902     PISSN: 01673785     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0167-3785(07)12004-2     Document Type: Review

References (104)

1. Schönert K. Aufbereit.-Tech. 32 (1991) 487
2. Tavares L.M., and King R.P. ZKG Int. 58 (2005) 49
3. Chabtree D.D., Kinasevich R.S., Mular A.L., Meloy T.P., and Fuerstenau D.W. Trans. SME/AIME 229 (1964) 201
4. Cleaver J.A.S., Ghadiri M., and Rolfe N. Powder Technol. 76 (1993) 15
5. L.G. Austin, J.M. Menacho, F. Pearcy, A general model for autogenous and semi-autogenous milling, Proc. APCOM, SAIMM, 1987, vol. 2, p. 107.
6. Gilvarry J.J., and Bergstrom B.H. J. Appl. Phys. 32 (1961) 400
7. Bergstrom B.H., and Sollenberger C.L. Trans. SME/AIME 220 (1961) 373-379
8. Bergstrom B.H., Sollenerger C.L., and Mitchel Jr. W. Trans. SME/AIME 220 (1961) 367
9. Arbiter N., Harris C.C., and Stambolzis G.A. Trans. SME/AIME 244 (1969) 118
10. Rumpf H. Powder Technol. 7 (1973) 145
11. Schönert K. Trans. SME/AIME 252 (1972) 21
12. Schubert H. Aufbereit.-Tech. 5 (1987) 237
13. Yashima S., Saito F., Sagawa T., Suzuki H., and Sano S. Kagaku Kogaku Ronbunshu 1 (1975) 344 (in Japanese)
14. S. Yashima, S. Morohashi, F. Saito, Science Reports of Research Institutes, Tohoku University, 28 (1979) 116.
15. Yashima S., Saito F., and Mikuni T. Kagaku Kogaku Ronbunshu 2 (1976) 150 (in Japanese)
16. Yashima S., Kanda Y., and Sano S. Powder Technol. 5 (1987) 277
17. Dan C.C., and Schubert H. Aufbereit.-Tech. 31 (1990) 241
18. S.E.A. Awachie, Development of crusher models using laboratory particle breakage data, Ph.D. thesis, University of Queensland, Brisbane, 1983.
19. Tavares L.M. Miner. Eng. 12 (1999) 43
20. Tavares L.M., and King R.P. Int. J. Miner. Process. 54 (1998) 1
21. Piret E.L. Chem. Eng. Prog. 49 (1953) 56
22. Narayanan S.S., and Whiten W.J. Trans. Inst. Min. Metall. 97 (1988) C115
23. Krogh S.R. Powder Technol. 27 (1980) 171
24. Napier-Munn T.J., Morrell S., Morrison R.D., and Kojovic T. Mineral Comminution Circuits: Their Operation and Optimization (1996), University of Queensland, Brisbane
25. W.J. Barnard, F.A. Bull, Primary breakage of brittle particles, Fourth Tewksbury Symposium University of Melbourne, Melbourne, 1979, p. 20.1.
26. Sikong L., Hashimoto H., and Yashima S. Powder Technol. 61 (1990) 51
27. Anderson T.L. Fracture Mechanics: Fundamentals and Applications. 2nd edition (1995), CRC Press, Boca Raton
28. Cottrell B., and Mai Y.W. Fracture Mechanics of Cementitious Materials (1996), Blackie Academic and Professional
29. ASTM, Standard drop shatter test for coal. Annual Book of ASTM Standards, 1991, vol. 5.05, p. 214.
30. L.M. Tavares, R.R. Diniz, Analysis of self-breakage for modelling media competence in autogenous mills, Proc. VI Southern Hemisphere Meeting on Mineral Technol., Rio de Janeiro, 2001, vol. 1, p. 47.
31. A. Jowett, K.R. Weller, A critical assessment of comminution test methods, Fourth Tewksbury Symp., University of Melbourne, Melbourne, 1979, p. 18.1.
32. Narayanan S.S. Bull. Proc. Australas. Inst. Min. Metall. 291 (1986) 49
33. P.M.M. Vervoorn, B. Scarlett, Particle impact testing, Proc. 4th Eur. Symp. Commin., Ljubljana, 1990, p. 195.
34. K. Schönert, M. Marktscheffel, Liberation of composite particles by single particle compression, shear and impact loading, Proc. 6th Eur. Symp. Commin., Nürnberg, 1986, p. 29.
35. Vogel L., and Peukert W. Powder Technol. 129 (2003) 101
36. Karpinski J.M., and Tervo R.M. Trans. SME/AIME 229 (1964) 126
37. Hendersen S.M., and Hansen R.C. Trans. ASAE 17 (1974) 315
38. S. Baumgardt, B. Buss, P. May, H. Schubert, On the comparison of results in single grain crushing under different kinds of load, Proc. 11th Int. Miner. Process. Congr., Cagliari, 1975, p. 3.
39. J. Gross, S.R. Zimerley, Trans. SME/AIME 87 (1930) 7-26, 27-34, 35.
40. Gross J. US Bureau Mines Bull. 402 (1938) 148
41. Charles R.J. Trans. SME-AIME 208 (1957) 80
42. Bearman R.A., Briggs C.A., and Kojovic T. Miner. Eng. 10 (1997) 255
43. Frandrich R.G., Clout J.M.F., and Bourgeois F.S. Miner. Eng. 11 (1998) 861
44. V.F. Pereira, C.M. Vasques, P.B. Neves, L.M. Tavares, Breakage of coarse particles by impact, Proc. 21st Encontro Nacional de Tratamento de Minérios e Metalurgia Extrativa, Florianópolis, 2005, vol. 1, p. 33 (in Portuguese).
45. Bourgeois F.S., and Banini G.A. Int. J. Miner. Process. 65 (2002) 31
46. S.S. Narayanan, W.J. Whiten, Proc. Australas. Inst. Min. Metall. 286 (1983), 31.
47. L.M. Tavares, Micro scale investigation of particle breakage applied to the study of thermal and mechanical predamage, Ph.D. thesis, University of Utah, Salt Lake City, 1997.
48. Sahoo R. Powder Technol. 161 (2006) 158
49. Fahrernwald A.W., Newton J., and Herkernhoff E. Eng. Min. J. 139 (1938) 43
50. Bond F.C. Mining Technology, Technical Preprint No. 1895 169 (1946) 58
51. Gaudin A.M., and Hukki R.T. Trans. SME/AIME 169 (1946) 67
52. Bergstrom B.H. In: Weiss N.L. (Ed). SME Mineral Processing Handbook (1985), SME, Littleton 30
53. S.S. Narayanan, Development of a laboratory single particle breakage technique and its application to ball mill modelling and scale-up, Ph.D. thesis, The University of Queensland, Brisbane, 1985.
54. Szczelina P., and Raaz V. Aufbereit.-Tech. 43 (2002) 28
55. Steier K., and Schönert K. Dechema-Monographien 69 (1972) 167
56. Unland G., and Szczelina P. Int. J. Miner. Process. 74S (2004) S209
57. Dowding C.H., and Lytwynyshyn G. Powder Technol. 31 (1982) 277
58. Oka Y., and Majima W. Can. Metall. Q. 9 (1970) 429
59. Taylor L.J., Papadopoulos D.G., Dunn P.J., Bentham A.C., Mitchell J.C., and Snowden M.J. Powder Technol. 143-144 (2004) 179
60. Pitchumani R., Zhupanska O., Meesters G.M.H., and Scarlett B. Powder Technol. 143-144 (2004) 56
61. Fuerstenau D.W., Kapur P.C., and Gutsche O. Powder Technol. 76 (1993) 253
62. Gutsche O., Kapur P.C., and Fuerstenau D.W. Powder Technol. 76 (1993) 263
63. Kapur P.C., Gutsche O., and Fuerstenau D.W. Powder Technol. 76 (1993) 271
64. Hopkinson B. Phil. Trans. Royal Soc. A213 (1914) 375
65. McCarter M.K., and Kim D.S. In: Rossmanith R. (Ed). Rock Fragmentation by Blasting (1993), Balkema, Rotherdam 63
66. Lundberg B. Int. J. Rock Mech. Min. Sci. 13 (1976) 187
67. Kolsky H. Stress Waves in Solids (1963), Dover, New York
68. R. Weichert, J.A. Herbst, An ultra fast load cell for measuring particle breakage, Proc. 6th Eur. Symp. Commin., Nurnberg, 1986, p. 3.
69. King R.P., and Bourgeois F.S. Miner. Eng. 6 (1993) 353
70. A. Höffler, Fundamental breakage studies of mineral particles in an ultra fast load cell device, Ph.D. thesis, University of Utah, Salt Lake City, 1990.
71. F.S. Bourgeois, Single-particle fracture as a basis for micro scale modelling of comminution processes, Ph.D. thesis, University of Utah, Salt Lake City, 1993.
72. Tavares L.M., and King R.P. Int. J. Miner. Process. 74S (2004) S267
73. C.A. Briggs, A fundamental model for cone crusher, Ph.D. thesis, The University of Queensland, Brisbane, 1997.
74. Tavares L.M., and Lima A.S. Rem: R. Esc. Minas 59 (2006) 61
75. Hildinger P. Chemie-Ing.-Techn. 41 (1969) 278
76. Weichert R. ZKG Int. 45 (1992) 51
77. Tavares L.M., and Cerqueira M.C. Cem. Concr. Res. 36 (2006) 409
78. Tavares L.M., Austin L.G., and King R.P. In: Kawatra S.K. (Ed). Advances in Comminution (2006), SME, Littleton 205-222
79. Hiramatsu Y., and Oka Y. Int. J. Rock Mech. Min. Sci. 3 (1966) 89
80. R.A. Bearman, P.J. Pine, B.A. Wills, Use of fracture toughness testing in characterizing the comminution potential of rock, Proc. MMIJ/IMM Joint Symp., Kyoto, 1989, p. 161.
81. Bearman R.A. Int. J. Rock Mech. Min. Sci. 36 (1996) 257
82. Goldsmith W. Impact (1960), Edward Arnold, London
83. King R.P. Modelling and simulation of mineral processing systems (2001), Butterworth-Heinemann, Oxford
84. Kapur P.C., Pande D., and Fuerstenau D.W. Int. J. Miner. Process. 49 (1997) 223
85. Klotz K., and Schubert H. Powder Technol. 32 (1982) 129
86. 10 procedure, Technical Report, Comminution Centre, University of Utah, 1994.
87. Tavares L.M. Powder Technol. 142 (2004) 81
88. Tavares L.M., and King R.P. Powder Technol. 123 (2002) 138
89. Grady D.E., and Kipp M.E. In: Atkinson B.K. (Ed). Fracture Mechanics of Rock (1987), Academic Press, London 429
90. Gildemeister H.H., and Schönert K. Dechema Monographien 69 (1972) 233
91. Yashima S., Kanda Y., Saito F., Sasaki T., and Iijima M. Kagaku Kogaku 37 (1973) 1218 (in Japanese)
92. Weibull W. J. Appl. Mech. 9 (1951) 293
93. L.M. Tavares, Role of microstructure in comminution, Proc. 23rd Int. Miner. Process. Congr., Rome, 2000, vol. C, pp. 4-99.
94. Dieter G.E. Mechanical Metallurgy. 3rd edition (1986), McGraw-Hill, New York
95. Kenny W.J., and Piret E.L. Trans. AICHE 7 (1961) 199
96. Schönert K., Umhauer H., and Rumpf H. Glastech. Ber. 35 (1962) 272
97. Yashima S., Saito F., and Mikuni T. Kagaku Kogaku Ronbunshu 2 (1976) 150 (in Japanese)
98. R.P. King, F.S. Bourgeois, A new conceptual model for ball milling, Proc. 18th Int. Miner. Proc. Congr., Sydney, 1993, vol. 1, p. 81.
99. Mishra B.K., and Rajamani R.K. Appl. Math. Model. 16 (1992) 598
100. Weedon D.M., and Wilson F. Int. J. Miner. Process. 59 (2000) 195
101. JKTech, JKSimMet Users Manual, Brisbane, 1999.
102. S. Morrell, W.I.L. Lim, L.A. Tondo, D. David, Modelling the high pressure grinding rolls, Mining Technology Conference, 1996, p. 169.
103. Fuestenau D.W., and Abouzeid A.-Z.M. Int. J. Miner. Process. 67 (2002) 161
104. K. Schönert, Comminution from theory to practice, Proc. 19th Int. Miner. Process. Congr., San Francisco, 1995, vol. 1, p. 7.