Partially pyrolyzed olive pomace sorbent of high permeability for preconcentration of metals from environmental waters

Journal of Hazardous Materials

Volumn 169, Issue 1-3, 2009, Pages 58-64

  El Sheikh, Amjad H ^a   Sweileh, Jamal A ^a   Saleh, Maysoon I ^a  

^a HASHEMITE UNIVERSITY   (Jordan)

Author keywords

Atomic absorption spectrometry; Bioseparation; Olive waste; Preconcentration; Pyrolysis; Water samples

Indexed keywords

BIOSEPARATION; CERTIFIED REFERENCE MATERIALS; CONCENTRATION RANGES; DETECTION LIMITS; ENVIRONMENTAL WATER; FLAME ATOMIC ABSORPTION SPECTROMETRY; HEAT PRETREATMENT; HIGH PERMEABILITY; INERT ATMOSPHERES; LAKE SEDIMENTS; LOW PERMEABILITY; OLIVE POMACE; OLIVE WASTE; PARTIAL PYROLYSIS; PRE-CONCENTRATION PROCEDURES; PRECONCENTRATION; PRECONCENTRATION PROCESS; TAP WATER; VACUUM PRESSURE; WATER SAMPLES; WELL WATER;

ATOMIC ABSORPTION SPECTROMETRY; ATOMIC SPECTROSCOPY; ATOMS; CAPILLARITY; METAL RECOVERY; PYROLYSIS; SORBENTS; SORPTION; SPECTROMETERS; WATER ABSORPTION; WATER WELLS; ZINC;

ABSORPTION SPECTROSCOPY;

CADMIUM; COPPER; TAP WATER; ZINC;

ATOMIC ABSORPTION SPECTROSCOPY; CONCENTRATION (COMPOSITION); DETECTION METHOD; HEATING; PERMEABILITY; PYROLYSIS; SAMPLING; SEPARATION; SORPTION; TRACE METAL; WATER;

ARTICLE; CONTROLLED STUDY; HEAVY METAL REMOVAL; INTERMETHOD COMPARISON; OLIVE; PROCESS DEVELOPMENT; PROCESS OPTIMIZATION; PYROLYSIS; SEDIMENT; WATER POLLUTION; WATER SAMPLING;

ADSORPTION; CADMIUM; COPPER; FRESH WATER; METALS, HEAVY; OLEA; PERMEABILITY; SPECTROPHOTOMETRY, ATOMIC; WATER POLLUTANTS, CHEMICAL; ZINC;

EID: 67649793206     PISSN: 03043894     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2009.03.061     Document Type: Article

References (49)

1. Narin I., and Soylak M. The uses of 1-(2-pyridylazo) 2-naphtol (PAN) impregnated Ambersorb 563 resin on the solid phase extraction of traces heavy metal ions and their determinations by atomic absorption spectrometry. Talanta 60 (2003) 215-221
2. Tuzen M., and Soylak M. Column system using Diaion HP-2MG for determination of some metal ions by flame atomic absorption spectrometry. Anal. Chim. Acta 504 (2004) 325-334
3. Shokrollahi A., Ghaedi M., Hossaini O., Khanjari N., and Soylak M. Cloud point extraction and flame atomic absorption spectrometry combination for copper(II) in environmental and biological samples. J. Hazard. Mater. 160 (2008) 435-440
4. Thurman E.M., and Mills M.S. In: Winefordner J.D. (Ed). Solid Phase Extraction: Principles and Practice, Chemical Analysis vol. 147 (1998), John Wiley & Sons, Inc., New York
5. Shin E.W., Karthikeyan K.G., and Tshabalala M.A. Adsorption mechanism of cadmium on juniper bark and wood. Bioresour. Technol. 98 (2007) 588-594
6. Igwe J.C., and Abia A.A. A bioseparation process for removing heavy metals from wastewater using biosorbents. Afr. J. Biotechnol. 5 (2006) 1167-1179
7. Zghida H., Gauthier R., Helal A., and Bartegi A. Modeling of adsorption of anionic surfactants onto cationized lignocellulosic materials. J. Appl. Polym. Sci. 99 (2006) 82-87
8. Shin E.W., Karthikeyan K.G., and Tshabalala M.A. Orthophosphate sorption onto lanthanum-treated lignocellulosic sorbents. Environ. Sci. Technol. 39 (2005) 6273-6279
9. Pagnanelli F., Toro L., and Veglio F. Olive mill solid residues as heavy metal sorbent material: a preliminary study. Waste Manage. 22 (2002) 901-907
10. Volesky B. Biosorption Application Aspects Process Simulation Tools (2000), Mc-Gill University, Canada
11. Veglio F., and Beolchini F. Removal of toxic metals by biosorption: a review. Hydrometallurgy 44 (1997) 301-316
12. Gharaibeh S.H., Abu-el-sha'r W.Y., and Al-Kofahi M.M. Removal of selected heavy metals from aqueous solutions using processed solid residue of olive mill products. Water Res. 32 (1998) 498-502
13. Wafwoyo W., Seo C.W., and Marshall W.E. Utilization of peanut shells as adsorbents for selected metals. J. Chem. Technol. Biotechnol. 74 (1999) 1117-1121
14. Ho Y.S., Chiu W.T., Hsu C.S., and Huang C.T. Sorption of lead ions from aqueous solution using tree fern as a sorbent. Hydrometallurgy 73 (2004) 55-61
15. Veglio F., Beolchini F., and Prisciandaro M. Sorption of copper by olive mill residues. Water Res. 37 (2003) 4895-4903
16. Tarley C.R., and Arruda M.A. Biosorption of heavy metals using rice milling by-products. Characterisation and application for removal of metals from aqueous effluents. Chemosphere 54 (2004) 987-995
17. Igwe J.C., Nwokennaya E.C., and Abia A.A. The role of pH in heavy metal detoxification by biosorption from aqueous solutions containing chelating agents. Afr. J. Biotechnol. 4 (2005) 1109-1112
18. Gang S., and Weixing S. Sunflower stalks as adsorbents for the removal of metal ions from wastewater. Ind. Eng. Chem. Res. 37 (1998) 1324-1328
19. Gardea-Torresday J.L., Gonzalez J.H., Tiemann K.J., Rodrignuez O., and Gamez G. Phytofiltration of hazardous cadmium, chromium lead and zinc ions by biomass of Medicago sativa (Alfalfa). J. Hazard. Mater. 57 (1998) 29-39
20. Abia A.A., Horsfall M., and Didi O. The use of chemically modified and unmodified cassava waste for the removal of Cd, Cu and Zn ions from aqueous solution. Bioresour. Technol. 90 (2003) 345-348
21. Ho Y.S. Removal of copper ions from aqueous solution by tree fern. Water Res. 37 (2003) 2323-2330
22. Raji C., and Amirudhan T.S. Batch Cr (VI) removal by polyacrylamide-grafted sawdust: kinetics and thermodynamics. Water Res. 32 (1998) 3772-3780
23. Ngah W.S., and Liang K.H. Adsorption of gold (III) ions onto chitosan and N-carboxymethyl chitosan: equilibrium studies. Ind. Eng. Chem. Res. 38 (1999) 1411-1414
24. Randell J.M., Reuter F.C., and Waiss A.C. Removal of cupric ions from solution by contact with peanut skins. J. Appl. Polym. Sci. 19 (1994) 156-161
25. Eromosele I.C., and Otitolaye O.O. Binding of iron, zinc and lead ions from aqueous solution by shea butter (Butyrospermum parkiz) seed husk. Bull. Environ. Contam. Toxicol. 52 (1994) 530-537
26. Low K.S., Lee C.K., and Leo A.C. Removal of metals from electroplating wastes using banana pith. Bioresour. Technol. 51 (1995) 227-231
27. Reddad Z., Zerente C., Andres Y., and Cloriec P. Mechanisms of Cr(III) and Cr(VI) removal from aqueous solutions by sugar beat pulp. Environ. Toxicol. 24 (2003) 257-264
28. Dupond L., and Guillon E. Removal of hexavalent chromium with a lignocellulosic substrate extracted from wheat bran. Environ. Sci. Technol. 37 (2003) 4235-4241
29. Borja R., Martin A., Alvonso V., Garcia I., and Banks C.J. Influence of different aerobic pretreatments on the kinetics of anaerobic digestion of olive mill wastewater. Water Res. 29 (1995) 489-495
30. de Hoces M.C., de Castro F.H., Garcia G.B., and Rivas G.T. Equilibrium modeling of removal of cadmium ions by olive stones. Environ. Prog. 25 (2006) 261-266
31. Fiol N., Villaescusa I., Marti{dotless}nez M., Miralles N., Poch J., and Serarols J. Sorption of Pb(II), Ni(II), Cu(II) and Cd(II) from aqueous solution by olive stone waste. Sep. Purif. Technol. 50 (2006) 132-140
32. Martin-Lara M.A., Pagnanelli F., Mainelli S., Calero M., and Toro L. Chemical treatment of olive pomace: effect on acid-base properties and metal biosorption capacity. J. Hazard. Mater. 156 (2008) 448-457
33. Pagnanelli F., Mainelli S., Veglio F., and Toro L. Heavy metal removal by olive pomace: biosorbent characterisation and equilibrium modelling. Chem. Eng. Sci. 58 (2003) 4709-4717
34. Pagnanelli F., Mainelli S., De Angelis S., and Toro L. Biosorption of protons and heavy metals onto olive pomace: modelling of competition effects. Water Res. 39 (2005) 1639-1651
35. Blazquez G., Hernainz F., Calero M., and Ruiz-Ńũnez L.F. Removal of cadmium ions with olive stones: the effect of some parameters. Proc. Biochem. 40 (2005) 2649-2654
36. Bansal R., Donne J., and Stoeckli H. Active Carbon (1998), Dekker, New York
37. 2 activation of olive stones carbonised under pressure. Carbon 39 (2001) 320-323
38. Galiatsatou P., Metaxas M., and Kasselouri-Rigopoulou V. Adsorption of zinc by activated carbons prepared from solvent extracted olive pulp. J. Hazard. Mater. 91 (2002) 187-203
39. El-Sheikh A.H., Newman A.P., Al-Daffaee H., Phull S., and Cresswell N. Characterization of activated carbon prepared from a single cultivar of Jordanian olive stone by chemical and physicochemical techniques. J. Anal. Appl. Pyrol. 71 (2004) 151-164
40. Hajaligol M., Waymack B., and Kellogg D. Pyrolysis behaviour and kinetics of biomass derived materials. J. Anal. Appl. Pyrol. 62 (2002) 331-349
41. Pagnanelli F., Mainelli S., and Toro L. New biosorbent materials for heavy metal removal: product development guided by active site characterization. Water Res. 42 (2008) 2953-2962
42. El-Sheikh A.H., Sweileh J.A., and Al-Degs Y.S. Effect of dimensions of multi-walled carbon nanotubes on its enrichment efficiency of metal ions from environmental waters. Anal. Chim. Acta 604 (2007) 119-126
43. Gregg S., and Sing K. Adsorption, Surface Area and Porosity (1967), Academic Press Inc., London
44. El-Sheikh A.H., Newman A.P., Al-Daffaee H., Phull S., and Lynch D. The use of activated carbons with basic properties for the treatment of 2-chlorophenol. Adsorp. Sci. Technol. 22 (2004) 451-465
45. Allen R.F., Baldini N.C., Donofrio P.E., Gutman E.L., Keefe E., Kramer J.G., Leinweber C.M., and Mayer V.A. Annual Book of ASTM Standards, vol. 15.01. Refractories, Carbon and Graphite Products, Activated Carbon (1996), American Society for Testing and Materials, Easton
46. Boehm H.P. Surface oxides on carbon and their analysis: a critical assessment. Carbon 40 (2002) 145-149
47. Doree C. The Methods of Cellulose Chemistry (1950), Chapman and Hall Ltd., London
48. Browning G.L. Methods in Wood Chemistry (1967), Wiley-Interscience, New York
49. Sjostrom E. Wood Chemistry: Fundamentals and Applications (1981), Academic Press, New York