Targeting minimum waste treatment flow rate

Chemical Engineering Journal

Volumn 152, Issue 2-3, 2009, Pages 367-375

  Bandyopadhyay, Santanu ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

Author keywords

Pinch analysis; Process integration; Targeting; Treatment unit with flow loss; Waste composite curve; Water pinch

Indexed keywords

DISCHARGE LIMIT; ENVIRONMENTALLY SAFE; FLOW LOSS; FLUE GAS DESULPHURIZATION; GRAPHICAL REPRESENTATIONS; INLET FLOW RATE; OPTIMIZATION PROBLEMS; OUTLET CONCENTRATION; PINCH ANALYSIS; PROCESS INTEGRATION; REMOVAL RATIOS; TARGETING; TREATMENT UNIT WITH FLOW LOSS; TREATMENT UNITS;

DESULFURIZATION; ENVIRONMENTAL REGULATIONS; FLOW RATE; FLUE GASES; GRAPHIC METHODS; INDUSTRIAL WASTES; VOLATILE ORGANIC COMPOUNDS; WATER ANALYSIS; WATER MANAGEMENT;

INDUSTRIAL WASTE TREATMENT;

EID: 67649595814     PISSN: 13858947     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cej.2009.04.060     Document Type: Article

References (43)

1. El-Halwagi M.M. Process Integration (2006), Academic Press, Elsevier
2. Kemp I.C. Pinch Analysis and Process Integration: A User Guide on Process Integration for the Efficient Use of Energy (2007), Elsevier
3. Bandyopadhyay S., Mishra M., and Shenoy U.V. Energy-based targets for multiple-feed distillation columns. AIChE J. 50 (2004) 1837-1853
4. Varghese J., and Bandyopadhyay S. Targeting for energy integration of multiple fired heaters. Ind. Eng. Chem. Res. 46 (2007) 5631-5644
5. El-Halwagi M.M., and Manousiouthakis V. Synthesis of mass exchange networks. AIChE J. 8 (1989) 1233-1244
6. Hallale N., and Fraser D.M. Capital cost targets for mass exchange networks. A special case: water minimization. Chem. Eng. Sci. 53 (1998) 293-313
7. Wang Y.P., and Smith R. Wastewater minimization. Chem. Eng. Sci. 49 (1994) 981-1006
8. Bandyopadhyay S., Ghanekar M.D., and Pillai H.K. Process water management. Ind. Eng. Chem. Res. 45 (2006) 5287-5297
9. Pillai H.K., and Bandyopadhyay S. A rigorous targeting algorithm for resource allocation networks. Chem. Eng. Sci. 62 (2007) 6212-6221
10. Kulkarni G.N., Kedare S.B., and Bandyopadhyay S. Determination of design space and optimization of solar water heating systems. Solar Energy 81 (2007) 958-968
11. Roy A., Arun P., and Bandyopadhyay S. Design and optimization of renewable energy based isolated power systems. SESI J. 17 (2007) 54-69
12. Arun P., Banerjee R., and Bandyopadhyay S. Sizing curve for design of isolated power systems. Energy Sustain. Dev. 11 (2007) 21-28
13. Kulkarni G.N., Kedare S.B., and Bandyopadhyay S. Design of solar thermal systems utilizing pressurized hot water storage for industrial applications. Solar Energy 82 (2008) 686-699
14. Kulkarni G.N., Kedare S.B., and Bandyopadhyay S. Optimization of solar water heating systems through water replenishment. Energy Convers. Manage. 50 (2009) 837-846
15. Tan R.R., and Foo D.C.Y. Pinch analysis approach to carbon-constrained energy sector planning. Energy 32 (2007) 1422-1429
16. Lee S.C., Ng D.K.S., Foo D.C.Y., and Tan R.R. Extended pinch targeting techniques for carbon-constrained energy sector planning. Appl. Energy 86 (2009) 60-67
17. Arun P., Banerjee R., and Bandyopadhyay S. Optimum sizing of battery integrated diesel generator for remote electrification through design-space approach. Energy 33 (2008) 1155-1168
18. Bandyopadhyay S. Source composite curve for waste reduction. Chem. Eng. J. 125 (2006) 99-110
19. Takama N., Kuriyama T., Shiroko K., and Umeda T. Optimal water allocation in petroleum refinery. Comput. Chem. Eng. 4 (1980) 251
20. Wang Y.P., and Smith R. Design of distributed effluent treatment systems. Chem. Eng. Sci. 49 (1994) 3127
21. Kuo W.C.J., and Smith R. Effluent treatment system design. Chem. Eng. Sci. 52 (1997) 4273
22. Galan B., and Grossmann I.E. Optimal design of distributed wastewater treatment networks. Ind. Eng. Chem. Res. 37 (1998) 4036
23. Hernández-Suárez R., Castellanos-Fernández J., and Zamora J.M. Superstructure decomposition and parametric optimization approach for the synthesis of distributed wastewater treatment networks. Ind. Eng. Chem. Res. 43 (2004) 2175
24. Freitas I.S.F., Boaventura R.A.R., and Costa C.A.V. Conceptual design of industrial wastewater treatment processes: a hierarchical approach procedure. Proceedings of the Second Conference on Process Integration, Modeling and Optimization for Energy savings and Pollution Reduction (PRESS'99). Budapest, Hungary (1999)
25. Douglas J.M. Conceptual Design of Chemical Processes (1988), McGraw-Hill, New York
26. Statyukha G., Kvitka O., Dzhygyrey I., and Jeżowski J. A simple sequential approach for designing industrial wastewater treatment networks. J. Clean. Prod. 16 (2008) 215-224
27. Zhelev T.K., and Bhaw N. Combined water-oxygen pinch analysis for better wastewater treatment management. Waste Manage. 20 (2000) 665-670
28. Kuo W.C.J., and Smith R. Designing for the interactions between water use and effluent treatment. Trans. Inst. Chem. Eng. 76 (1998) 287
29. Chang C.-T., and Li B.-H. Improved optimization strategies for generating practical water-usage and -treatment network structures. Ind. Eng. Chem. Res. 44 (2005) 3607-3618
30. Gunaratnam M., Alva-Argá ez A., Kokossis A., Kim J.-K., and Smith R. Automated design of total water systems. Ind. Eng. Chem. Res. 44 (2005) 588-599
31. Ng D.K.S., Foo D.C.Y., and Tan R.R. Targeting for Total Water Network. Part 2. Waste treatment targeting and interactions with water system elements. Ind. Eng. Chem. Res. 46 (2007) 9114-9125
32. Bandyopadhyay S., and Cormos C.C. Water management in process industries incorporating regeneration and recycle through single treatment unit. Ind. Eng. Chem. Res. 47 (2008) 1111-1119
33. Ng D.K.S., Foo D.C.Y., Tan R.R., and Tan Y.L. Ultimate flowrate targeting with regeneration placement. Chem. Eng. Res. Design 85 9 (2007) 1253-1267
34. A. Alva-Argáez, A.C. Kokossis, R. Smith, Automated design of industrial water networks. American Institute of Chemical Engineering Annual Meeting, Paper 13f, Miami, FL, 1998.
35. Alva-Argáez A., Kokossis A.C., and Smith R. Wastewater minimisation of industrial systems using an integrated approach. Comput. Chem. Eng. 22 (1998) S741-S744
36. Tan R.R., Ng D.K.S., Foo D.C.Y., and Aviso K.B. A superstructure model for the synthesis of single-contaminant water networks with partitioning regenerators. Process Saf. Environ. Protect. 87 (2009) 197-205
37. Ng D.K.S., Foo D.C.Y., Tan R.R., Pau C.H., and Tan Y.L. Automated targeting for conventional and bilateral property-based resource conservation network. Chem. Eng. J. 149 (2009) 87-101
38. Prakash R., and Shenoy U.V. Targeting and design of water networks for fixed flowrate and fixed contaminant load operations. Chem. Eng. Sci. 60 (2005) 255-268
39. Parthasarathy G., and El-Halwagi M.M. Optimum mass integration strategies for condensation and allocation of multicomponent VOCs. Chem. Eng. Sci. 55 (2000) 881-895
40. Hui C.-W., and Smith R. Targeting and design for minimum treatment flowrate for vent streams. Trans. Inst. Chem. Eng. 79 (2001) 13-24
41. Erickson C., Jasinski M., and VanGansbeke L. Wet flue gas desulfurization (WFGD) upgrade at the trimble county generating station unit 1. Proceedings of the MEGA Symposium. Baltimore, Maryland, August 28-31 (2006)
42. 2 removal enhancement to the vectren, culley generating station units 2&3 wet flue gas desulfurization system. Proceedings of the ICAC Forum 05'. Baltimore, Maryland, March 7-10 (2005)
43. Kairies C.L., Schroeder K.T., and Cardone C.R. Mercury in gypsum produced from flue gas desulfurization. Fuel 85 17-18 (2006) 2530-2536