Interdisciplinary aspects of offshore structures

Marine Technology Society Journal

Volumn 39, Issue 3, 2005, Pages 99-115

  Marshall, Peter W ^a  

^a MTS Offshore Structures Committee ^*

Author keywords

[No Author keywords available]

Indexed keywords

ECONOMIC POTENTIALS; INTERDISCIPLINARY COLLABORATIONS; MARINE EDUCATION; OCEAN ENERGY; OFF SHORE PLATFORMS; OFFSHORE TECHNOLOGY CONFERENCE; SEA FLOOR; STRUCTURAL ENGINEER; STRUCTURAL ENGINEERING;

DRILLING PLATFORMS; HEALTH RISKS; MARINE ENGINEERING; MINERAL RESOURCES; MINERALS; OCEAN ENGINEERING; OCEANOGRAPHY; OFFSHORE STRUCTURES; REMOTELY OPERATED VEHICLES; TECHNOLOGY; WAVE POWER;

ENGINEERING;

EID: 67649192666     PISSN: 00253324     EISSN: None     Source Type: Journal    
DOI: 10.4031/002533205787442530     Document Type: Article

References (129)

1. Adams, J. 1995. Risk. London: University College.
2. AISC. 1997. Specification for the Design of Steel Hollow Structural Sections. In: Hollow Structural Sections Connections Manual. Sec 10 pp. i -52. American Institute of Steel Construction.
3. API Bulletin 2N. 1988. Planning, Designing, and Constructing Fixed Offshore Structures in Ice Environments. American Petroleum Institute.
4. st edition. American Petroleum Institute.
5. AWS D1.1-2004. Structural Welding Code - Steel. American Welding Society.
6. Bernard, M.A., and LeBlanc, R.J. 1965. Resume of Quarternary Geology of the Northwestern Gulf of Mexico Province. Shell EPR Publication 400.
7. Bouwkamp, J.G. 1966-1970. Tubular Joints Under Static and Alternating Loads. Structures and Materials Research Reports 66-15, 67-29, and 70-4 Berkeley: Univ. of California.
8. Brannon, H.R., et al. 1967. Storm wave characteristics. SPE Journal, March.
9. Bretschneider, C.L. 1957. Evaluation of drag and inertial coefficients from maximum total range of wave forces. Texas A&M Rept. 55-5
10. Bretschneider, C.L. 1958. Revisions in wave forecasting: deep and shallow water. Proc. 6th Coastal Engrg Conf. Council on Wave Research.
11. Bretschneider, C.L. 1967. Estimating winddriven currents over the continental shelf. Ocean Industry, June.
12. Campbell, B.J. 1906. In: Engineering News.
13. Carter, R.M., Marshall, P.W. et aI. 1969. Material problems in offshore platforms. Proc. OTC 1043.
14. rd edition.
15. Chen, W.F. and Han, D.J. 1985. Tubular Members in Offshore Structures, Bath: Pitman. 271 pp.
16. CRC TG 18. 1976. Circular Tubes and Shells. In: Guide to Stability Design Criteria for Metal Structures. Bethlehem: Structural Stability Research Council
17. Focht, J.A. and McClelland, B. 1955. Analysis of Laterally Loaded Piles by Difference Equation Solution. Texas Engineer, Fall.
18. Focht, J.A. 1967. Interpretation of Boring and Test Results. In: Ocean Engineering, Vol.II. Shell Development Co. Technical Training Series.
19. Focht, J.A. and Kraft, L.M. 1976. Progress with Marine Geotechnical Engineering Problems. Presented at the ASCE Bicentennial Convention, Philadelphia.
20. Haring, R.E. et al. 1979. Total wave forces and moments. OTS session, Proc. 4th ASCE Conf on Civil Engineering in the Oceans, 1979.
21. Horton, E.E. 1987. U.S. Patent 4, 702, 321.
22. Jaske, C.E. et al. 1977. Interpretive Report on Corrosion Fatigue of Welded Carbon Steel for Application to Offshore Structures. Battelle Mem Inst report to API
23. Lee, G.C. 1968. Twenty Years of Platform Development. Offshore, June.
24. st ASCE Conf on Civil Engineering in the Oceans, San Francisco.
25. Marshall, P.W. and Toprac, A.A. 1974. Basis for Tubular Joint Design. Welding Journal, May.
26. Marshall, P.W. 1974. Basic Considerations for Tubular Joint Design in Offshore Construction. WRC Bulletin 193. Welding Research Council.
27. st Intl Conf on the Behaviour of Off-Shore Structures, BOSS-76, Trondheim.
28. Marshall, P.W. 1977. A Review of American Criteria for Tubular Structures-and Proposed Revisions. Copenhagen: IIW Doc. XV-405-77
29. Marshall, P.W., ed. 1978. Inelastic Behavior of Tubular Members and Structures. ASCE Combined Preprint 3302. Chicago: American Society of Civil Engineers.
30. Marshall, P.W. 1979. Strategy for monitoring, inspection, and repair for fixed offshore platforms. Proc. ASME Conf on Structural Integrity Technology, Washington, D.C.
31. Marshall, P.W. 1980. Fixed Pile-Supported Steel Offshore Platforms. Journal of the Structural Division, ASCE, vol.107, No.ST6, p 1083-1094.
32. Marshall, P.W. 1982. An overview of recent work on cyclic inelastic behavior and system reliability. Proc. SSRC.
33. Marshall, P.W. 1986. Designed of Internally Stiffened Tubular Joints. In: Proc IIW-AIJ International Meeting on Safety Criteria in Design of Tubular Structures, Tokyo.
34. Marshall, P.W. 1992. Design of Welded Tubular Connections: Basis and Use of AWS Code Provisions. Amsterdam: Elsevier. 412 pp.
35. Marshall, P.W. 1993. Offshore Structures. Chapter 6.7, In: Constructional Steel Design. London: Elsevier. pp.761-789.
36. Marshall, P.W. 1993a. Offshore Industry Perspective on Ocean Engineering Education. In: ASEE Annual Conference Proceedings, Champaign-Urbana. American Society of Engineering Education.
37. Marshall, P.W. and Inglis, R.B. 1986. Wave Kinematics and Force Coefficients. ASCE Structures Congress, New Orleans.
38. Marshall, P.W. 1990. Fracture control procedures for deep water offshore towers. Welding Journal, January.
39. Marshall, P.W. and Wardenier, J. 2005. Tubular vs. Non-Tubular Hot Spot Stress Methods. Proc ISOPE Conf, Seoul.
40. Maslin, M. 2004. Gas Hydrates: A Hazard for the 21st Century. Benfield Hazard Research Centre, University College, London.
41. Matlock, H. and Reese, L.C. 1962. Generalized Solutions for Laterally Loaded Piles. Transactions, ASCE, Paper 3370.
42. Matlock, H. 1965. Lateral Load Behavior of a Pile Group in Clay Soil. Report to Shell, 1965.
43. McClelland, B. 1966. The Progress of Consolidation in Delta Front and Pro-delta Clays of the Mississippi River. Presented at. Research Conference on Marine Geotechnique, Univ. of Illinois, Urbana.
44. McClelland, B., Focht, J.A. and Emrich, W.J. 1967. Problems in Design and Installation of Heavily Loaded Pipe Piles. In: Civil Engineering in the Oceans, ASCE, San Francisco.
45. McClelland, B. and Reifel, M.D. 1987. Planning and Design of Fixed Offshore Platforms. New York: Van Nostrand Reinhold.
46. McClelland Engrs. 1963. Appendix 'C', Criteria for predetermining pile capacity. Found in their soil and foundation reports to clients (revised 1967).
47. McClelland Engrs. 1966. Pile Loading Tests, Single Piles and Circular Groups, Venice and Harvey, Louisiana. Report to Shell.
48. Meith, R.M. and Gooch, A.B. 1966. Computer analysis of off-shore drilling platforms. Paper No. SPE 1414, AIME Symposium on Offshore Technology and Operations, New Orleans.
49. Michel, W.H. 1967. Sea spectra simplified. Presented to SNAME Gulf Section.
50. Miller, C.D. 1981. Summary of Buckling Tests on Fabricated Steel Cylindrical Shells in the USA. Presented at: Buckling of Shells in Offshore Structures, Imperial College, London.
51. Mineral Management Service. 1999. Proceedings of the MMS/Industry International Workshop on Corrosion Control for Marine Structures and Pipelines. Galveston, Texas, February 9-11.
52. Morison, J.R. et al. 1950. The force exerted by surface waves on piles. Petroleum Transactions, AIME.
53. O'Neill, M.W. et al. 1983. An evaluation of P-Y relationships in sand. Report to API.
54. National Institute of Standards & Technology. 2004. International Workshop of Coatings for Corrosion Protection: Marine Pipelines and Ship Structures. NIST Special Publication 1035. Biloxi, MS, April 14-16.
55. Pellini, W.S. and Puzak, P.O. 1963. Fracture analysis diagram procedures for the fracturesafe engineering design of steel structures. WRC Bulletin 88.
56. Perkins, R.L. 1967. Soil Boring Equipment and Techniques. In: Ocean Engineering, Vol .II. Shell Development Co. Technical Training Series.
57. Peyton, H.R. 1968. Ice and marine structures. Ocean Industry. March, Sept. & Dec. issues.
58. Poulos, H.G. 1971. Behavior of Laterally Loaded Piles: Pile Groups. Journal of the Surveying and Mapping Division, ASCE, Vol. 97, No. SM5. Paper 8093, p.733f.
59. Reid, R.C. and Bretschneider, C.L. 1953. Surface waves and off-shore structures: the design wave in deep or shallow water, storm tide, and forces on vertical piles and large submerged objects. Report of the Texas A&M Research Foundation.
60. Rodabaugh, E.C. 1978. Review of Data Relevant to the Design of Tubular Joints for Use in Fixed Offshore Structures. Battelle Mem Inst report to WRC.
61. Rolfe, S.T. and Barsom, J.M. 1977. Fatigue and Fracture Control in Structures. Englewood, Cliffs: Prentice-Hall.
62. Seed, H.B. and Reese, L.C. 1956. The action of soft clay along friction piles. Trans. ASCE, Paper 2882.
63. Sherman, D.R. 1976. Tentative Criteria for Structural Applications of Steel Tubing and Pipe. AISI Committee of Steel Pipe Producers.
64. Sherman, D.R. and Erzurumlu, H. 1976. Ultimate Capacity of Tubular Beam Columns. Presented at: ASCE National Structural Engineering Conference.
65. SIMS. 1987. Steel in Marine Structures. Amsterdam: Elsevier.
66. th International Conference on the Behaviour of Off-Shore Structures. The Hague, Netherlands.
67. Sverdrup, H. and Munk, W.H. 1947. Wind, Sea, and Swell: Theory of Relations for Forecasting. U.S. Hydrographic Office.
68. UKOSRP 1978. European Offshore Steels Research. Preprints of the Select Seminar, Cambridge, England.
69. Weigel, R.L., Beebe, K. and Moon. 1957. Ocean wave forces on circular cylindrical piles. Journal of the Hydraulics Division, ASCE, April.
70. Weigel, R.L. 1964. Oceanographic Engineering. Englewood Cliffs: Prentice-Hall.
71. Weigel, R.L. 1970. Earthquake Engineering. Englewood Cliffs: Prentice-Hall.
72. Wilson, B.W. 1966. Design sea and wind conditions for offshore structures. Presented at the Offshore Exploration Conference, OECON-66.
73. Audibert, J.M.E. 1978. Recent Advances in Predicting Pile Driveability. OTC 3273.
74. Bea, R.G. et aI. 1973. Movements and forces developed by wave-induced slides in soft clays. OTC 1899.
75. Bea, R.G. et aI. 1977. A study of soil-pile-structure systems in severe earthquakes. OTC 2749.
76. Billington, C.J. et al. 1978. The Strength of Large Diameter Grouted Connections. OTC 3083.
77. Cardone, V.J. 1975. Hindcasting the directional spectra of hurricane generated waves. OTC 2332.
78. Chen, W.F. 1976. The Axial Strength and Behavior of Cylindrical Columns. OTC 2683.
79. Dean, R.O. 1972. Application of stream function theory to offshore design problems. OTC 1613.
80. Dekker, J.N. et al. 1988. Computer analysis of heavy lift operations. OTC 5819.
81. Digre, K.A., Marshall, P.W. et aI. 1989. Design of the Bullwinkle platform. OTC 6050.
82. Doyle, E.H. et al. 1988. Technical Advances in High-Resolution Hazard Surveying, Deepwater Gulf of Mexico. OTC 5758.
83. Doyle, E.H. 1999. Pile Installation Performance for Four TLP's in the Gulf of Mexico. OTC 10826.
84. Edel, C.J.C. et al. 1999. Installation of the Baldpate Compliant Tower. OTC 10919.
85. Evans, D.G. 1969. Analysis of wave force data. OTC 1005.
86. Evans, D.G. 1972. Theoretical hindcasts of currents and water elevations using numerical models. OTC1692.
87. Forristall, G.Z. 1978. Storm wave kinematics. OTC 3227.
88. Forristall, G.Z. 1988. Wind spectra and gust factors over water. OTC 5735.
89. Fugro, B.V. 1975. Site Investigations for North Sea Forties Field. OTC 2246.
90. Garrison, C.J. et al. 1974. Wave forces on large volume structures: a comparison between theory and model tests. OTC 2137.
91. Gurney, T.M. 1973. On Fatigue Design Rules for Welded Structures. OTC 1907.
92. Havens, F.E. 1969. Fatigue Strength of Quenched and Tempered Carbon Steel Plates and Welded Joints in Sea Water. OTC 1046.
93. Halliburton Svcs. 1979. An Assessment of Grouting Materials, Placement Methods, And Monitoring Equipment For Offshore Structures. OTC 3671.
94. Hartt, W.H. 1975. Cathodic Protection Criteria for Notched Mild Steel Undergoing Corrosion Fatigue in Sea Water. OTC 2380.
95. Hartt, W.H. et al. 1988. Fatigue Properties of Exemplary High-Strength Steels in Seawater. OTC 5663.
96. Horton, E.E. and Pauling, J.R. 1970. Analysis of the Tension Leg Stable Platform. OTC 1263.
97. Horton, E.E. et al. 1972. Optimization of Stable Platform Characteristics. OTC 1553.
98. Idriss, I.M. 1975. Soil Response Considerations in Seismic Design of Offshore Platforms. OTC 2355.
99. Kinra, R.K. 1976. Hydrostatic and Axial Collapse Tests of Stiffened Cylinders. OTC 2685.
100. Kochera, J.W. et al. 1976. Fatigue of Structural Steel for Offshore Platforms. OTC 2604.
101. Kraft, L.M. et al. 1974. State-of-the-Art: Ultimate Axial Capacity of Grouted Piles. OTC 2081.
102. Leverette, S.J. et al. 1999. Morpeth SeaStar Mini-TLP. OTC 10855.
103. Lowrey, D.P. et al. 1969. Applications of Wave-Equation Analysis to Offshore Pile Foundations. OTC 1055.
104. Marshall, P.W. and Chabot, L. 1993. Concrete Floating Central Production Facility. OTC 7159.
105. Marshall P.W. et al. 1993. Back-span Stressjoint. OTC 7258.
106. Marshall, P.W. 1995. Infrastructure for Regional Development in Deep Water. OTC 7867.
107. Marshall, P.W. et al. 2005. Background to New API Fatigue Provisions. OTC 17295.
108. Matlock, H. 1970. Correlations for Design of Laterally Loaded Piles in Soft Clay. OTC 1204.
109. Matlock, H. et al. 1972. Nonlinear analysis of soil-supported frame. OTC 1699.
110. Matlock, H. 1975. Computer Predictions for Axially-Loaded Piles with Nonlinear Supports. OTC 2186.
111. Matlock, H. 1977. A Computer Program for the Analysis of Beam-Columns Under Static Axial and Lateral Loads. OTC 2953.
112. McClelland Engrs. 1972. Practical Planning for Driving Offshore Pipe Piles. OTC 1600.
113. McClelland Engrs. 1976. Application of Remote Vane Results to Offshore Geotechnical Problems. OTC 2626.
114. McClelland Engrs. 1977. Seafloor Cone Penetrometer for Deep Penetration Measurements of Ocean Sediment Strength. OTC 2787.
115. Moses, F. 1970. Reliability format for offshore structures. OTC 3027.
116. Munse, W.H. 1978. Predicting the Fatigue Behavior of Weldments for Random Loads. OTC 3300.
117. O'Neill, M.W. 1995. The Response of Suction Caissons in Normally Consolidated Clays to Cyclic TLP Loading Conditions. OTC 7796.
118. Ostapenko, A. 1978. Tests on Two High- Strength Short Tubular Columns. OTC 3086.
119. Pecknold, et al. 2005. New API RP2A Tubular Joint Strength Design Provisions. OTC 17310.
120. Reese, L. and Cox, W. 1974. Field Testing of Laterally Loaded Piles in Sand. OTC 2079.
121. Reese, L. and Cox, W. 1974. Analysis of Laterally Loaded Piles in Sand. OTC 2080.
122. Sangrey, D.W. 1977. Response of Offshore Piles to Cyclic Loading. OTC 2944.
123. Smith, C.E. 1996. Response of a Steel Jacket Platform Subject to Measured Seafloor Seismic Ground Morions. OTC 8110.
124. Sterling, G.H. et al. 1973. The failure of South Pass 70 'B' Platform in Hurricane Camille. OTC 1898.
125. Toprac, A.A., Erzurumlu, H., and Kurobane, Y. 1969. Research in Tubular Joints: Static and Fatigue Loads. OTC 1062.
126. Vickery, B.J. et al. 1985. An investigation of dynamic wind loads on offshore platforms. OTC 4955.
127. Ward, E.G. et aI. 1978. Statistics of hurricane waves in the Gulf of Mexico. OTC 3229.
128. Wold, A. et al. 1973. Development of method for measuring susceptibility of steel plate to lamellar tearing. OTC 1915.
129. Yura, J. and Zettlemoyer, N. 1980. Ultimate Capacity Equations for Tubular Joints. OTC 3690.