The role of localized deformation in hydrogen-assisted crack propagation in 21Cr-6Ni-9Mn stainless steel

Acta Materialia

Volumn 57, Issue 13, 2009, Pages 3795-3809

  Nibur, K A ^a   Somerday, B P ^a   Balch, D K ^a   San Marchi, C ^a  

^a SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

Fracture toughness; Hydrogen embrittlement; Localized plasticity; Stainless steel

Indexed keywords

ANNEALED MATERIALS; DEFORMATION BAND; ELASTIC-PLASTIC FRACTURE; FERRITE CONTENT; FRACTURE INITIATION; FRACTURE MODE; FRACTURE RESISTANCE; FRACTURE TOUGHNESS MEASUREMENTS; GROWTH ORIENTATIONS; HIGH CONCENTRATION; LOCALIZED DEFORMATIONS; LOCALIZED PLASTICITY; MICROCRACK FORMATION; PRE-CHARGED HYDROGEN;

AUSTENITIC STAINLESS STEEL; CHROMIUM; CRACKS; DEFORMATION; FERRITE; FORGING MACHINES; FORGINGS; FRACTURE; FRACTURE MECHANICS; HYDROGEN; HYDROGEN EMBRITTLEMENT; MANGANESE; MANGANESE COMPOUNDS; PLASTICITY; STEEL; STEEL METALLURGY; STRENGTH OF MATERIALS; STRESS CONCENTRATION;

FRACTURE TOUGHNESS;

EID: 67649088099     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actamat.2009.04.027     Document Type: Article

References (49)

1. San Marchi C, Somerday BP. Sandia national laboratories technical report SAND2008-1163; 2008.
2. San Marchi C, Somerday BP. In: SAE World Congress, Detroit, MI, 2007. Washington, DC: SAE International; 2007.
3. San Marchi C., Somerday B.P., Tang X., and Schiroky G.H. Int J Hydrogen Energy 22 (2008) 889
4. Caskey G.R. In: Oriani R.A., Hirth J.P., and Smialowski M. (Eds). Hydrogen degradation of ferrous alloys (1985), Noyes Publications, Park Ridge, NJ 822
5. Robertson I.M. Eng Fract Mech 64 (1999) 649
6. Birnbaum H.K., and Sofronis P. MSE A176 (1994) 191
7. Sofronis P., Liang Y., and Aravas N. Eur J Mech-A/Solids 20 (2001) 857
8. Nibur K.A., Bahr D.F., and Somerday B.P. Acta Mater 54 (2006) 2677
9. Birnbaum HK, Robertson IM, Sofronis P, Teter D. In: Magnin T, editor. Proceedings of Corrosion-Deformation Interactions '96, Nice, France, 1996. London: The Institute of Materials; 1997. p. 172.
10. Abraham D.P., and Alstetter C.J. Metall Mater Trans 26A (1995) 2859
11. Alstetter C., and Abraham D. In: Thompson A.W., and Moody N.R. (Eds). Hydrogen effects in materials (1996), TMS, Warrendale, PA 599
12. Menard M, Olive J-M, Brass AM, Aubert I. In: Shipilov SA, Jones RH, Olive J-M, Rebak RB, editors. Environment-induced cracking of materials - chemistry, mechanics and mechanisms proceedings of the second international conference on environment-induced cracking of metals (EICM-2), Banff, Alberta, Canada, 2004. Oxford: Elsevier; 2008. p. 179.
13. Ulmer D.G., and Altstetter C.J. Acta Metall Mater 39 (1991) 1237
14. Ferreira P.J., Robertson I.M., and Birnbaum H.K. Acta Mater 46 (1998) 1749
15. Ferreira P.J., Robertson I.M., and Birnbaum H.K. Acta Mater 47 (1999) 2991-2998
16. Liang Y., Sofronis P., and Aravas N. Acta Mater 51 (2003) 2717
17. Odegard BC, Brooks JA, West AJ. In: Thompson AW, Bernstein IM, editors. Proceedings of an international conference on effect of hydrogen on behavior of materials. Moran WY: The Metallurgical Society of AIME; 1975. p. 116.
18. San Marchi C., Balch D.K., Nibur K., and Somerday B.P. J Pres Ves 130 (2008) 041401
19. Louthan Jr. M.R., Caskey Jr. G.R., Donovan J.A., and Rawl Jr. D.E. MSE 10 (1972) 357
20. Gysler A., Lutjering G., and Gerold V. Acta Metall 22 (1974) 901
21. Grujicic M., and Owen W.S. Acta Metall Mater 43 (1995) 4201
22. Gerold V., and Karnthaler H.P. Acta Metall 37 (1989) 2177
23. Van Stone R.H., Low J.R., and Shannon Jr. J.L. Met Trans 9A (1978) 539
24. Pegel B., Schlaubitz K., and Burck P. Scripta Metall 13 (1980) 47
25. Koss DA, Chan KS. Technical report from Michigan Technological University, Houghton Department of Metallurgical Engineering; 1979.
26. Koss D.A., and Chan K.S. Acta Metall 28 (1980) 1245
27. Caskey Jr. G.R. Scripta Metall 11 (1977) 1077
28. Caskey Jr. G.R. In: Gilbertson L.N., and Zipps R.D. (Eds). Fractography and Materials Science, ASTM STP vol. 733 (1981), ASTM International, West Conshohocken, PA 86
29. Robinson S.L., and Thomas G.J. Met Trans 22A (1991) 879
30. Brooks J.A., and Thompson A.W. Int Mater Rev 36 (1981) 16
31. Brooks J.A., West A.J., and Thompson A.W. Met Trans 14A (1983) 75
32. Brooks J.A., and West A.J. Met Trans 12A (1981) 213
33. Somerday BP, Balch DK, Dadfarnia M, Nibur KA, Cadden CH, Sofronis P. Met Trans 2009; in press.
34. San Marchi C.W., Somerday B.P., Zelinski J., Tang X., and Schiroky G.H. Met Trans 38 (2007) 2763
35. Zheng W., and Hardie D. Corros Sci 32 (1991) 23
36. Zheng W., and Hardie D. Corrosion 47 (1991) 792
37. El-Yazgi A.A., and Hardie D. Corros Sci 38 (1996) 735
38. Birnbaum H.K. MRS Bull 28 (2003) 479
39. Stroh AN. Proc Royal Soc London vol. 223A; 1954. p. 404-14.
40. Tomota Y., Nakano J., Xia Y., and Inoue K. Acta Mater 46 (1998) 3099
41. Tomota Y., Xia Y., and Inoue K. Acta Mater 46 (1998) 1577
42. Liu S., Liu D., and Liu S. J Mater Sci 42 (2007) 7514
43. Tobler R.L., and Meyn D. Metall Trans 19A (1988) 1626
44. Ilola R.J., Hanninen H.E., and Ullakko K.M. ISIJ Int 36 (1996) 873
45. Liu S.C., Hashida T., Takahashi H., Kuwona H., and Hamaguchi Y. Metall Mater Trans 29A (1998) 791
46. Van Stone R.H., Cox T.B., Low J.R., and Psioda J.A. Int Metals Rev 30 (1985) 157
47. Van Stone R.H., Low J.R., and Shannon Jr. J.L. Metall Trans 9A (1978) 539
48. Anderson T.L. Fracture mechanics: fundamentals and applications. 3rd ed. (2005), Taylor & Francis, Boca Raton, FL
49. Perra M.W. In: Louthan M.R., McNitt R.P., and Sisson R.D. (Eds). Environmental degradation of engineering materials in hydrogen (1981), VPI Press, Blacksburg, VA