Optimizing cutting parameters in minimum quantity of lubrication milling of hardened cold work tool steel

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 223, Issue 1, 2009, Pages 43-54

  Iqbal, A ^a,c   Dar, N U ^a   He, N ^b   Khan, I ^a   Li, L ^b  

^a UNIVERSITY OF ENGINEERING AND TECHNOLOGY   (Pakistan)

^b NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS   (China)

^c University of Engineering and Technology   (Pakistan)

Author keywords

AISI D2; High speed milling; SEM; Surface roughness; Tool life

Indexed keywords

AISI D2; AVERAGE SURFACE ROUGHNESS; COLD WORKS; CUTTING PARAMETERS; CUTTING SPEED; CUTTING TECHNOLOGY; DAMAGE MODES; DEPTH OF CUT; ENERGY DISPERSIVE SPECTROMETRY; FEED-RATES; FINISH MACHINING; HARDENED STEEL; HIGH-SPEED; HIGH-SPEED MILLING; MINIMUM QUANTITY OF LUBRICATIONS; RESPONSE SURFACE METHODOLOGY; SEM; SURFACE FINISHES; TOOL LIFE; WORK PIECES;

HARDENING; LUBRICATION; MATHEMATICAL OPERATORS; METAL ANALYSIS; MILLING (MACHINING); REGRESSION ANALYSIS; SCANNING ELECTRON MICROSCOPY; SPEED; STEEL RESEARCH; SURFACE PROPERTIES; SURFACE ROUGHNESS; TOOL STEEL;

ANALYSIS OF VARIANCE (ANOVA);

EID: 67549102286     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544054JEM1231     Document Type: Article

References (21)

1. Schulz, H. Why high speed cutting? In International Conference on High speed machining, Nanjing, China, 2004, pp. 1-20.
2. Axinte, D. A. and Dewes, R. C. Tool wear and workpiece surface integrity when high-speed ball nose end milling hardened AISI H13. In 3rd International Conference on Metal cutting and HSM, Metz, France, 2001, pp. 171-179.
3. Axinte, D. A. and Dewes, R. C. Surface integrity of hot work tool steel after high-speed milling - data and empirical models. J. Mater. Process. Technol., 2002, 127, 325-335.
4. Iqbal, A., He, N., Khan, I., Li, L., and Dar, N. U. Modeling the effects of cutting parameters in MQL-employed finish hard-milling process using D-optimal method. J. Mater. Process. Technol., 2008, 199, 379-390.
5. Nagakawa, T., Akeda, T., and Matsuoka, T. High speed milling of steel and tool life. In 8th International Conference on Tool, die, and mold industry, Barcelona, Spain, 1995.
6. Quaile, R. Understanding MQL, http://www.mmson line.com/articles/010505.html.
7. Braga, D. U., Diniz, A. E., Miranda, G. W. A., and Coppinni, N. L. Using a minimum quantity lubrication and a diamond coated tool in drilling of aluminum-silicon alloys. J. Mater. Process. Technol., 2002, 122, 127-138.
8. Weinert, K., Inasaki, I., Sutherland, J. W., and Wakabayashi, T. Dry machining and minimum quantity lubrication. Ann. CIRP, 2004, 53(2), 511-537.
9. Koshy, P., Dewes, R. C., and Aspinwall, D. K. High speed end milling of hardened AISI D2 tool steel (58HRc). J. Mater. Process. Technol., 2002, 127, 266-273.
10. Boehner, J., Dumitrescu, M., Elbastawi, M. A., El-Wardany, T. I., and Chen, L. Effect of carbide tool grades and cutting edge geometry on tool life during high speed machining of hardened tool steel. In 2nd International German and French Conference on High speed machining, Darmstadt, Germany, 1999, pp. 37-46.
11. Yamada, Y., Aoki, T., Kitaura, S., Tanaka, Y., Okazaki, Y., and Hayasaki, H. High speed cutting performance of (Al, Ti)N coated carbide end mills for hardened steels. In First French German Conference on High speed machining, Metz, France, 1997, pp. 486-489.
12. Urbanski, J. P., Koshy, P., Dewes, R. C., and Aspinwall, D. K. High speed machining of moulds and dies for net shape manufacture. Mater. Des., 2000, 21, pp. 395-402.
13. Coldwell, H., Woods, R., Paul, M., Koshy, P., Dewes, R. C., and Aspinwall, D. K. Rapid machining of hardened AISI H13 and D2 moulds, dies and press tools. J. Mater. Process. Technol., 2003, 135, pp. 301-311.
14. Lo, S.-P. An adaptive-network based fuzzy inference system for prediction of workpiece surface roughness in end milling. J. Mater. Process. Technol., 2003, 142, 665-675.
15. Liao, Y. S. and Lin, H. M. Mechanism of minimum quantity lubrication in high-speed milling of hardened steel. Int. J. Mach. Tool. Mf., 2007, 47(11), 1660-1666.
16. Liao, Y. S., Lin, H. Ma., and Chen, Y. C. Feasibility study of the minimum quantity lubrication in high-speed end milling of NAK80 hardened steel by coated carbide tool. Int. J. Mach. Tool Mf., 2007, 47(11), 1667-1676.
17. Iqbal, A., He, N., Khan, I., Li, L., and Dar, N. U. Modeling the effects of cutting parameters in MQL-employed finish hard-milling process using D-optimal method. J. Mater. Process. Technol., 2008, 199(1-3), 379-390.
18. Kang, M. C., Kim, K. H., Shin, S. H., Jang, S. H., Park, J. H., and Kim, C. Effect of the minimum quantity lubrication in high-speed end-milling of AISI D2 cold-worked die steel (62 HRC) by coated carbide tools. Surf. Coat. Technol., 2008, 202(22-23), 5621-5624.
19. Su, Y., He, N., Li, L., Iqbal, A., Xiao, M. H., Xu, S., and Qiu, B. G. Refrigerated cooling air cutting of difficult-to-cut materials. Int. J. Mach. Tool Mf., 2007, 47(6), 927-933.
20. Anderson, M. J. and Whitcomb, P. J. RSM simplified: optimizing processes using response surface methods for design of experiments, 2004 (Productive Publications Inc., Ontario, Canada).
21. Myers, R. H. Response surface methodology, 1971 (Allyn and Bacon Inc., Boston, Massachusetts).