The influence of (Mg17Al12) phase distribution on corrosion behavior of AM50 alloy in NaCl solution

TMS Annual Meeting

Volumn , Issue , 2009, Pages 321-331

  Maddela, Surender ^a   Wang, Yar Ming ^b   Sachdev, Anil K ^b   Balasubramaniam, R ^c  

^a MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

^c INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

Author keywords

Mg alloy corrosion; Phase distribution; SVET

Indexed keywords

ALLOY COMPOSITIONS; AM50 ALLOY; COOLING RATES; CORROSION BEHAVIOR; CORROSION CURRENT DENSITIES; CORROSION POTENTIALS; EUTECTIC MIXTURE; GRAIN SIZE; IN-SITU; MG ALLOY CORROSION; NACL CONCENTRATION; NACL SOLUTION; PHASE DISTRIBUTION; POLARIZATION POTENTIAL; SCANNING VIBRATING ELECTRODE TECHNIQUE; SECONDARY PHASIS; SVET; ZERO-CURRENT POTENTIAL;

ALLOYS; CATHODIC POLARIZATION; COOLING; CORROSIVE EFFECTS; MAGNESIUM; MAGNESIUM ALLOYS; MAGNESIUM CASTINGS; MAGNESIUM PRINTING PLATES; POLARIZATION; POTENTIODYNAMIC POLARIZATION; SODIUM CHLORIDE;

CORROSION RESISTANCE;

EID: 67449119413     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (30)

1. Yar-Ming Wang, and Surender Maddela, "Corrosion behavior of pure magnesium in sodium sulfate solution," In: A. A. Luo, N. R. Neelameggham, and R. S. Beals, (ed.), "The Minerals, Metals & Material Society," TMS 2006, (2006), pp. 317-323
2. A. A. Luo, "Magnesium: current and potential automotive applications," JOM-Journal of Mineral Metals and Material Society, 54 (2) (2002), pp.42-48 P.
3. Schmutz, V. Guillaumin, R. S. Lillard, J. A. Lillard, and G. S. Frankel, "Influence of dichromate ions on corrosion process on pure magnesium," Journal of the Electrochemical Society, 150 (4) (2003), pp. B99-B110
4. G. Cole, "Issues that influence Magnesium's use in the automotive industry," Materials Science Forum, Vol. 419-422 (2003), pp.43-[50]
5. Surender Maddela, R. Balasubramaniam, Mridula Dixit Bharadwaj, and Yar-Ming Wang, "Galvanic Corrosion of Light Metal couple for Automotive Application," In: "CORCON 04, Conference on corrosion," NACE International, The corrosion society, India section, New Delhi, India, (2004)
6. G. Song, A. L. Bowles, and D. H. St. John, "Corrosion resistance of aged die cast magnesium alloy AZ91D," Materials Science and Engineering, A366 (2004), pp.74-86
7. G. Song, A. Atrens, and M. Dargusch, "Influence of microstructure on the corrosion of die cast AZ91D," Corrosion Science, 41 (1999), pp. 249-273
8. M. Jonsson, D. Thierry, and N. LeBozec, "The influence of microstructure on the corrosion behavior of AZ91D studied by scanning Kelvin probe force microscopy and scanning Kelvin probe," Corrosion Science, 48 (2006), pp. 1193-1208
9. S. Mathieu, C. Rapin, J. Steinmetz, and P. Steinmetz, "A corrosion study of the main constituent phases of AZ91 magnesium alloys," Corrosion Science 45 (2003), pp. 2741- 2755
10. O. Lunder, and K. Nisangliou, "Electrochemical behavior of intermetallic phases in Mg-Al cast alloys," in Proceedings of conference, "The Understanding and Prevention of Corrosion," Barcelona, Spain, Vol. 2 (1993), pp. 1249-1254.
11. O. Lunder, T. K. Aune, and K. Nisancioglu, "Effect of manganese additions on the corrosion behavior of mold-cast magnesium ASTM AZ91," Corrosion, 43(5) (1987), pp. 291-5
12. O. Lunder, J. E. Lein, T. K. Aune, and K. Nisancioglu, "The role of magnesium-aluminum (Mg17Al12) phase in the corrosion of magnesium alloy AZ91," Corrosion, 45(9) (1989), pp. 741- 748
13. H. S. Isaacs, "Ionic Current in Development," Ed. R. Nuccitelli, A. R. Liss Inc., New York, 210 (1986), pp. 37-44
14. I. Sekine, M. Yuasa, K. Tanaka, M. Fuke, and L. Silao, "Evaluation of corrosion protective properties of polymer films coated on steel after a chemical conversion treatment by a.c. impedance measurement and scanning vibrating electrode technique," Journal of the Japanese Society of Color Materials, 65(11) (1992), pp. 684-691
15. F. Zou, and D. Thierry, "Application of localized electrochemical impedance spectroscopy to the study of the degradation of organic coatings," ACS Symposium Series (Organic Coatings for Corrosion Control), 689 (1998), pp. 23- 30
16. F. Zou, and D. Thierry, "Localized electrochemical impedance spectroscopy for studying the degradation of organic coatings," Electrochemica Acta., 42(20-22) (1997), pp.3293-3301
17. H. S. Isaacs, A. J. Aldykiewicz, D. Tjierry and T. C. Simpson, "Measurements of corrosion at defects in painted zinc and zinc alloy coated steels using current density mapping," Corrosion, 52(3) (1996), pp. 163-168
18. H. S. Isaacs, "The measurements of the galvanic corrosion of soldered copper using the scanning vibrating electrode technique," Corrosion Science, 28 (6) (1988), pp. 547-558
19. H. S. Isaacs, and B. Vyas, "Scanning reference electrode techniques in localized corrosion," ASTM, Special Technical Publication, (Electrochem. Corr. Test.), 727 (1981), pp. 3-33
20. H.N. Mcmurray, and D. Worsley, "Advances in Chemical Kinetics," Eds. R.G. Compton, G. Hancock, 4 (1997), pp. 149- 202
21. H. N. McMurray, S. M. Powell, and D. A. Worsley, "Mechanistic changes in cut edge corrosion induced by variation of inhibitor pigmentation in organically coated galvanized steel," British Corrosion Journal, 36(1) (2001), pp. 42-48
22. S. Bohm, H. N. McMurray, S. M. Powell, and D. A. Worsley, "Photo-electrochemical investigation of corrosion using scanning electrochemical techniques," Electrochemica Acta., 45(14) (2000), pp. 2165-2174
23. A. A. Nayeb-Hashemi, and J. B. Clark, "Phase diagrams of binary magnesium alloys," ASM International, Material Park, OH, (1988)
24. A. J. McAlister, and J. L. Murray, "The (Al-Mg) aluminummanganese system," Bulletin of Alloy Phase Diagrams, 3(1) (1982)
25. V. Y. Gertsman, J. Li, S. Xu, J. P. Thomson, and M. Sahoo, "Microstructure and second-phase particles in low- and highpressure die-cast magnesium alloy AM50," Metallurgical and Materials Transaction A, Vol. 36A (2005), pp.1989-1997
26. S. H. Avner, Introduction to Physical Metallurgy," McGraw Hill, Singapore, 2nd Ed. (1974), pp. 500-502
27. D. A. Jones, "Principles and Prevention of Corrosion," Prentice Hall; Singapore, 2nd Ed., (1992), pp. 34-184
28. G. Song, A. Atrens, "Understanding magnesium corrosion," Advanced Engineering Materials Reviews, No. 12 (5), (2003), pp. 837-858
29. J. He, D. E. Tallman, and G. P. Bierwagen, "Conjugated polymers for corrosion control: scanning vibrating electrode studies of polypyrrole-Aluminum alloy interactions," Journal of The Electrochemical Society, 151(12) (2004), pp. B644-B651
30. S. K. Das and L. A. Davis, "High performance aerospace alloys via rapid solidification processing," Materials Science and Engineering, Vol. 98 (1988), pp. 1-12.