2198 Al-Li plates joined by Friction Stir Welding: Mechanical and microstructural behavior

Materials and Design

Volumn 30, Issue 9, 2009, Pages 3622-3631

  Cavaliere, P ^a   Cabibbo, M ^c   Panella, F ^a   Squillace, A ^b  

^a UNIVERSITY OF SALENTO   (Italy)

^b UNIVERSITY OF NAPLES FEDERICO II   (Italy)

^c UNIVERSITÀ POLITECNICA DELLE MARCHE   (Italy)

Author keywords

Al Li; Crack behavior; Fatigue; Friction Stir Welding; Thermoelastic stress analysis

Indexed keywords

AL-LI; AL-LI ALLOYS; CONTROL MODES; CRACK BEHAVIOR; CRACK EVOLUTION; CRACK INITIATION AND PROPAGATION; CYCLIC FATIGUE TESTS; FATIGUE; FATIGUE TESTS; FINITE ELEMENT ANALYSIS; MATERIAL MICROSTRUCTURES; MICRO-STRUCTURAL; ORTHOGONAL DIRECTIONS; PRINCIPAL STRAIN; PRINCIPAL STRESS; ROOM TEMPERATURE; SINGLE EDGE NOTCHED SPECIMENS; STRONG ANISOTROPY; TEM OBSERVATIONS; THERMOELASTIC; THERMOELASTIC STRESS ANALYSIS; WELDING CONDITIONS;

ALUMINUM; CRACK DETECTION; CRACK TIPS; ELASTICITY; FATIGUE TESTING; FRICTION; GAS WELDING; LITHIUM ALLOYS; MECHANICAL PROPERTIES; STRENGTH OF MATERIALS; STRESS ANALYSIS; STRUCTURAL DESIGN; THERMOELASTICITY; TRIBOLOGY;

FRICTION STIR WELDING;

EID: 67349287324     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.02.021     Document Type: Article

References (41)

1. Mishra R.S., and Ma Z.Y. Friction stir welding and processing. Mater Sci Eng R50 (2005) 1-78
2. Bussu G., and Irving P.E. The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints. Int J Fatigue 25 (2003) 77-88
3. John R., Jata K.V., and Sadananda K. Residual stress effects on near threshold fatigue crack growth in friction stir welded aerospace alloys. Int J Fatigue 25 (2003) 939-948
4. Jata K.V., Sankaran K.K., and Ruschau J. Friction-stir welding effects on microstructure and fatigue of aluminum alloy 7050-T7451. Met Mater Trans 31A (2000) 2181-2192
5. Guerra M., Schmidt C., McClure J.C., Murr L.E., and Nunes A.C. Flow patterns during friction stir welding. Mater Charact 49 (2003) 95-101
6. Ulysse P. Three-dimensional modeling of the friction stir-welding process. Int J Machine Tools Manuf 42 (2002) 1549-1557
7. Cavaliere P., Squillace A., Campanile G., and Panella F. Effect of welding parameters on mechanical and microstructural properties of AA6056 joints produced by friction stir welding. J Mater Process Technol 180 (2006) 263-270
8. Rhodes C.G., Mahoney M.W., and Bingel W.H. Effects of friction stir welding on microstructure of 7075 aluminium. Scripta Mater 36 (1997) 69-75
9. Sato Y.S., Urata M., Kokawa H., and Ikeda K. Hall-/Petch relationship in friction stir welds of equal channel angular-pressed aluminium alloys. Mater Sci Eng A354 (2003) 298-305
10. Berbon P.B., Bingel W.H., Mishra R.S., Bampton C.C., and Mahoney M.W. Friction stir processing: a tool to homogenize nanocomposites aluminum alloys. Scripta Mater 44 (2001) 61-66
11. Cavaliere P., Nobile R., Panella F., and Squillace A. Mechanical and microstructural behaviour of 2024-7075 aluminium alloy sheets joined by friction stir welding. Int J Mach Tools Manuf 46 (2006) 588-594
12. Cavaliere P., and Squillace A. Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082-AA2024 joints produced by friction stir welding. Mater Sci Forum 1163-1168 (2006) 519-521
13. James M.N., Bradley R., Lombard H., and Hattingh D.G. The relationship between process mechanisms and crack paths in friction stir welded 5083-H321 and 5383-H321 aluminium alloys. Fatigue Fract Eng Mater Struct 28 (2005) 245-256
14. Ericsson M., and Sandstrom R. Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIG. Int J Fatigue 25 (2003) 1379-1387
15. Dickerson T.L., and Przydatek J. Fatigue of friction stir welds in aluminium alloys that contain root flaws. Int J Fatigue 25 (2003) 1399-1409
16. Wei S., Hao C., and Chen J. Study of friction stir welding of 01420 aluminum-lithium alloy. Mater Sci Eng A452-453 (2007) 170-177
17. Chan R.W. Concise encyclopedia of materials characterization (2005), Elsevier Science Publisher
18. Buffa G., Donati L., Fratini L., and Tomesani L. Solid state bonding in extrusion and FSW: process mechanics and analogies. J Mater Proc Tech 177 (2006) 344-347
19. Cavaliere P., Squillace A., and Panella F. Effect of welding parameters on mechanical and microstructural properties of AA6082 joints produced by friction stir welding. J Mater Process Technol 200 (2008) 364-372
20. Luong M.P. Thermography: a new nondestructive evaluation method in fatigue damage. Mech Mater 28 (1998) 155-163
21. Hermanson K.S., and Sandor B.I. Corrosion fatigue modeling via differential infrared thermography. Exp Tech 22 (1998) 19-21
22. Yang B., Liaw P.K., Wang H., Huang J.Y., Kuo R.C., and Huang J.G. Thermography: a new nondestructive evaluation method in fatigue damage. JOM (2003) e55
23. Zhang D, Sandor BI. ASTM STP, vol. 1122; 1991. p. 341-53.
24. Liaw P.K. Nondestructive evaluation (NDE) and materials properties IV (1999), TMS, Warrendale, PA
25. Tomlison R.A., and Olden E.J. Thermoelasticity for the analysis of crack tip stress fields - a review. Strain 35 (1999) 49-55
26. Dìaz F.A., Patterson E.A., Tomlison R.A., and Yates J.R. Measuring stress intensity factors during fatigue crack growth using thermoelasticity. Fatigue Fract Eng Mater Struct 27 (2004) 571-583
27. Harwood N., and Cummings W.M. Thermoelastic stress analysis (1991), Adam Hilger
28. Shiratori M., Miyoshi T., Nakanishi T., Noda T., and Hanada A. Detection of cracks and measurement of stress intensity factors by infrared video systems. JSME Int J Series I 33 (1990) 400-408
29. Belgen M.H. Structural stress measurements with an infrared radiometer. ISA Trans 6 (1967) 164-177
30. Cavaliere P., Rossi G.L., Di Sante R., and Moretti M. Thermoelasticity for the evaluation of fatigue behavior of 7005/Al2O3/10p metal matrix composite sheets joined by FSW. Int J Fatigue 30 (2008) 198-206
31. Cavaliere P, De Santis A, Panella F, Squillace A. Thermoelasticity and CCD analysis of crack propagation in AA6082 friction stir welded joints. Int J Fatigue. doi:10.1016/j.ijfatigue.2008.07.016.
32. Huang Y.M., Abdel Mohsen H.H., and Rowlands R.E. Determination of individual stresses thermoelastically. Exp Mech 30 (1990) 88-94
33. Lesniak JR. Thermoelastic data improvements. In: Proceedings of SEM spring conference on experimental mechanics, Dearborn, Michigan; 1993. p. 721-9.
34. Offermann S., Beaudoin J.L., Bissieux C., and Frick H. Thermoelastic stress analysis under nonadiabatic conditions. Exp Mech 37 (1997) 409-413
35. John R., Jata K.V., and Sadananda K. Residual stress effects on near-threshold fatigue crack growth in friction stir welds in aerospace alloys. Int J Fatigue 25 (2003) 939-948
36. Kong H.S., and Ashby M.F. MRS Bull 41 (1991)
37. Cavaliere P., and Panella F. Effect of tool position on the fatigue properties of dissimilar 2024-7075 sheets joined by Friction Stir Welding. J Mater Process Technol 206 (2008) 249-255
38. Liechty BC, Webb BW. Modeling the frictional boundary condition in friction stir welding. Int J Mach Tools Manuf. doi:10.1016/j.ijmachtools.2008.04.005.
39. Bastier A., Maitournam M.H., Roger F., and Dang Van K. Modelling of the residual state of friction stir welded plates. J Mater Process Technol 200 (2008) 25-37
40. Zhang Z, Zhang HW. Numerical studies on controlling of process parameters in friction stir welding. J Mater Process Technol. doi:10.1016/j.jmatprotec.2008.01.044.
41. Rajesh S.R., Bang H.S., Chang W.S., Kim H.J., Oh C.I., and Chu J.S. Numerical determination of residual stress in friction stir weld using 3D-analytical model of stir zone. J Mater Process Technol 187-188 (2007) 224-226