Surface modification of poly(ε-caprolactone) using a dielectric barrier discharge in atmospheric pressure glow discharge mode

Acta Biomaterialia

Volumn 5, Issue 6, 2009, Pages 2025-2032

  Little, Uel ^a   Buchanan, Fraser ^a   Harkin Jones, Eileen ^a   Graham, Bill ^a   Fox, Brendan ^a   Boyd, Adrian ^b   Meenan, Brian ^b   Dickson, Glenn ^a  

^a QUEEN'S UNIVERSITY BELFAST   (United Kingdom)

^b UNIVERSITY OF ULSTER   (United Kingdom)

Author keywords

Ageing; Atmospheric pressure glow discharge; Imaging; Poly( caprolactone); Surface modification

Indexed keywords

ATMOSPHERIC PRESSURE; DIELECTRIC MATERIALS; GLOW DISCHARGES; PLASMA APPLICATIONS; SURFACE ROUGHNESS; WETTING;

AFTER-TREATMENT; ATMOSPHERIC PRESSURE GLOW DISCHARGE; DISCHARGE MODE; DOUBLE BONDS; FUNCTIONALIZATION PROCESS; GLOW DISCHARGE PLASMAS; POLY(Ε CAPROLACTONE); POLY(Ε-CAPROLACTONE); PRESSURE GLOW DISCHARGE; SURFACE-MODIFICATION;

SURFACE TREATMENT;

CARBON; OXYGEN; POLYCAPROLACTONE;

ARTICLE; ATMOSPHERIC PRESSURE; ATOMIC FORCE MICROSCOPY; CHEMICAL BOND; CHEMICAL MODIFICATION; CONTACT ANGLE; DIELECTRIC CONSTANT; DIFFERENTIAL SCANNING CALORIMETRY; MATHEMATICAL ANALYSIS; PERMEABILITY BARRIER; PRIORITY JOURNAL; SURFACE PROPERTY; THERMAL ANALYSIS; WETTABILITY; X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 67349279391     PISSN: 17427061     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actbio.2009.01.042     Document Type: Article

References (50)

1. Oran U., Swaraj S., Friedrich J.F., and Unger W.E.S. Surface analysis of plasma-deposited polymer films: plasma processes and polymers vol. 12 (2004), Wiley, New York p. 123-33
2. Guruvenket S., Rao G.M., Komath M., and Raichur A.M. Appl Surf Sci 236 1-4 (2004) 278-284
3. Oran U., Lippitz A., Schulze R.-D., Friedrich J.F., and Unger W.E.S. Surface analysis of plasma-deposited polymer films. 2. Plasma processes and polymers vol. 1(2) (2004), Wiley, New York p. 134-40
4. Royston W., Menard M., and Benalia H. Plasma Polym Process 1 (2004) 111-122
5. Wertheimer MR, Bartnikas R. In: d'Agostino R et al., editors. Plasma processing of polymers. Dordrecht: Kluwer; 1997. p. 435-50.
6. Webb K., Hlady V., and Tresco P.A. J Biomed Mater Res 41 (1998) 422-430
7. Daw R., and Candan S. Biomaterials 19 (1998) 1717-1725
8. Shelton R.M., Rasmussen A.C., and Davies J.E. Biomaterials 9 (1988) 24-29
9. Van Wachem P.B., Hogt A.H., Beugeling T., Feijen J., Bantjes A., Detmers J.P., et al. Biomaterials 8 (1987) 323-328
10. Bos R., Van der mei H.C., and Busscher H.J. FEMS Microbiol Rev 23 (1999) 179-230
11. Plasma H. Harrick plasma applications, 2004a, last update, plasma applications. Available from: http://www.harrickplasma.com/.
12. Hegemann D, Brunner H, Oehr C. Plasma treatment of polymers for surface and adhesion improvement. Nuclear instruments and methods in physics research section B: Beam interactions with materials and atoms, vol. 208; 2003. p. 281-86.
13. Arefi-Khonsari F., Kurdi J., Tatoulian M., and Amouroux J. Surf Coat Technol 142-144 (2001) 437-448
14. Legget G.J., Ratner B.D., and Vickerman J.C. Surf Interface Anal 23 (1995) 22
15. Yang J., Shi G., and Bei J. J Biomed Mater Res A 62 3 (2002) 438-446
16. Kogelschatz U., and Balder E. Pure Appl Chem 71 10 (1999) 1819-1828
17. Raffaele-Addamo A., Riccardi C., Selli E., Barni R., Piselli M., Poletti G., et al. Surf Coat Technol 174-175 (2003) 886-890
18. Hirotsu T., Ketelaars A.A.J., and Nakayama K. Polym Degrad Stability 68 3 (2000) 311-316
19. Massines F., and Gouda G. J Phys D 31 (1998) 3411-3420
20. Miralaï S.F., Monette E., Bartnikas R., Czeremuszkin G., Latrèche M., and Wertheimer M.R. Plasma Polym 5 (2000) 63-77
21. Sira M., Trunec D., Stahel P., Bursikova V., Navratil Z., and Bursik J. J Phys D (2005) 621-627
22. Kanazawa S., Kogoma M., Moriwaki T., and Okazai S. J Phys D 21 (1998) 838-840
23. Okazaki S., Kogoma M., Uehara M., and Kimara Y. Phys D 21 (1993) 889-892
24. Roth JR. Industrial plasma engineering. Bristol: Institute of Physics Publishing; 2001. p. 237-72.
25. Massines F., Rabehi A., Decomps P., Gadri R., Sègur P., and Mayoux Ch. J Appl Phys 83 (1998) 2950-2957
26. Kogelschatz U. IEEE Trans Plasma Sci 30 (2000) 1400
27. Nersisyan G., and Graham W.G. Plasma sources. Sci Technol 13 (2004) 582-587
28. Fox B, Morrow T, Graham WG. In: Proc 38th Int Univ Power Eng conf UPEC, Thessaloniki, Greece; 2003, p. 69.
29. Tochikubo F., Chiba T., and Watanabe T. Jpn J Appl Phys 38 (1999) 5244-5250
30. Konashi K, Kambara M, Noshi H, Uemura M. Jn Osaka Dent Univ 1987;21:1-8.
31. Beamson G, Briggs D. High resolution XPS of organic polymers: the Scienta ESCA300 Database. Chichester: John Wiley; 1992, p. 45.
32. Ruddy A.M.G., Nersisyan G., Graham W., and Murphy W. J Plastic Film Sheet 22 2 (2006) 103-119
33. Cristina C., Ricardo M., and Enric B. J Adhes Sci Technol 18 9 (2004) 1077-1089
34. Butt H.-J., Graf K., and Kappl M. Phys Chem Interf. 2nd ed. (2006), Weinheim p. 137-38
35. Hegemann D., Brunner H., et al. Plasma treatment of polymers for surface and adhesion improvement. Nucl Instr Meth Phys Res B 208 (2003) 281-286
36. Raffaele-Addamo A., Riccardi C., et al. Surf Coat Technol 174-175 (2003) 886-890
37. Cheng C., Liye Z., et al. Surf Coat Technol 200 24 (2006) 6659-6665
38. Lai J., Sunderland B., et al. Appl Surf Sci 252 10 (2006) 3375-3379
39. Wan Y., Qu X., et al. Biomaterials 25 19 (2004) 4777-4783
40. Wilson D., R N., and Williams R. Biomaterials 24 28 (2003) 5069-5081
41. Beamson G, Briggs D. High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database. Chichester: John Wiley; 1992. p. 142.
42. Ilaria Amato, Gabriela Ciapetti, Stefania Pagani, Giovanni Marletta, Cristina Satriano, Nicola Baldini, et al. Biomaterials 2007;28:3668-78.
43. Nakamatsu J., Delgado-Aparicio L.F., Da silva R., and Soberon F.J. Adhesion Sci Technol 13 (1999) 753-761
44. Wittenbeck P., and Wokaun A. J Appl Polym Sci 50 (1993) 187-200
45. Molina R., Jovancic P., Comelles F., Bertran E., and Erra P. J Adhesion Sci Technol 16 (2002) 1469-1485
46. Brett P.M., Harle J., et al. Bone 35 1 (2004) 124-133
47. Sanchis M.R., Blanes V., et al. Eur Polym J 42 7 (2006) 1558-1568
48. Van der Mei H.C., Stokroos I., Schakenraad J.M., and Busscher H. J Adhesion Sci Technol 5 (1991) 757-769
49. Morra M., Occhiello E., and Garbassi F. J Appl Polym Sci 48 (1993) 1331
50. Yeong-Tarng S., and Huang-Shung Y. J Supercritical Fluids 33 (2005) 183-192