Evaluation of pyrolisis LDPE modified asphalt paving materials

Journal of Materials in Civil Engineering

Volumn 21, Issue 10, 2009, Pages 618-623

  Al Hadidy, A I ^a   Tan, Yi Qiu ^b  

^a UNIVERSITY OF MOSUL   (Iraq)

^b HARBIN INSTITUTE OF TECHNOLOGY   (China)

Author keywords

Asphalts; Compressive strength; Concrete; Polyethylene; Rheology; Tensile strength

Indexed keywords

ASPHALT CONCRETE MIXTURES; ASPHALT CONTENT; ENGINEERING PROPERTIES; HOT MIX ASPHALT; INDIRECT TENSILE; INDIRECT TENSILE STRENGTH; MARSHALL STABILITY; MODIFIED ASPHALTS; MODIFIED BINDERS; PAVING MIXTURES; RESEARCH RESULTS; RHEOLOGICAL TEST; SOFTENING POINTS;

ASPHALT; BINDERS; ELASTICITY; PAVEMENTS; PLASTICITY; RHEOLOGY; SYSTEM STABILITY; TENSILE STRENGTH; THERMOPLASTICS; VISCOSITY;

COMPRESSIVE STRENGTH;

ASPHALT; COMPRESSIVE STRENGTH; CONSTRUCTION MATERIAL; DUCTILITY; HOMOGENEITY; PAVEMENT; PYROLYSIS; RHEOLOGY; TENSILE STRENGTH;

EID: 67349264624     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2009)21:10(618)     Document Type: Article

References (28)

1. Aksoy, A., Samiloglu, K., Tayfur, S., and Ozen, H. (2005). "Effects of various additives on the moisture damage sensitivity of asphalt mixtures." Constr. Build. Mater., 19, 11-18.
2. Al-Dubabe, I. A., Al-Abdul Wahhab, H. I., Asi, I. M., and Mohammed, F. A. (1998). "Polymer modification of Arab asphalt." J. Mater. Civ. Eng., 10(3), 161-167.
3. Al-Ghannam, K. A. A. (1996). "Study on the rheological properties of asphalt, effect of modification process on the homogeneity of the system." Ph.D. thesis, Univ. of Mosul, Mosul, Iraq.
4. Al-Hadidy, A. I. (2001). "Influence of polyethylene and sulfur wastes on characteristics of asphalt paving materials." MS thesis, Al-Mustansiriyah Univ., Baghdad, Iraq.
5. Al-Hadidy, A. I. (2006). "Evaluation of pyrolisis polypropylene modified asphalt paving materials." J. Al-Rafidian Eng., Mosul-Iraq, 14(2), 36-50.
6. ASTM. (2005). "Standard specification." ASTM 04-03, West Conshohoken, Pa.
7. Brown, E. R., and Cooley, L. A. (1999). "Designing stone matrix asphalt mixtures for rut-resistant pavements." Rep. No. 425, Washington, D.C.
8. Brown, E. R., Haddock, J. E., Mallick, R. B., and Lynn, T. A. (1997). "Development of a mixture design procedure for stone matrix asphalt (SMA)." NCAT Report No. 97-3, National Center for Asphalt Technology, Auburn, Ala.
9. Cawsey, D. C., and Raymond-Williams, R. K. (1990). "Stripping of macadams performance tests with different aggregates." J. Highways and Transportation, July, 16-21.
10. Chiu, C.-T., and Lu, L.-C. (2007). "A laboratory study on stone matrix asphalt using ground tire rubber." Constr. Build. Mater., 21, 1027-1033.
11. Cliff, N. (1998). Asphalt surfacing: A guide to asphalt surfacing and treatments used for the surface course of road pavements, E & FN Spon, An Imprint of Routledge, London, and New York, 74-76.
12. Cooly, L. A., and Brown, E. R. (2003). "Potential of using stone matrix asphalt (SMA) for thin overlays." Rep. No. 03-01, National Center for Asphalt Technology, Auburn Univ., Ala.
13. Crawford, R. J. (1987). Plastic engineering, 2nd Ed., Wiley, New York, 22.
14. Denning, J. H., and Garswell, J. (1981). "Improvement rolled asphalt surfacing by the addition of organic polymers." Rep. No. 989, Transport and Road Research Laboratory, Crowthome, Berkshire, U.K.
15. Fredw, B., Jr. (1971). Textbook of polymer science, 2nd Ed., Wiley, New York.
16. Highway Technet. (1998). "Stone upon stone put to the test." Federal Highway Administration, U.S. Department of Transportation Technology Application.
17. Ibrahim, M. A. (2006). "Laboratory comparison study for the use of stone matrix asphalt in hot weather climates." Constr. Build. Mater., 20, 982-989.
18. Jenkins, A. D. (1972). "Polymeric science." Materials science handbook, Vol. 1, North-Holland, Amsterdam, London.
19. Lobna, A. S. (1992). "Studies of the changing of rheological properties of asphalt." MS thesis, Univ. of Mosul, Mosul, Iraq.
20. Lottman, R. (1978). "Pressure moisture-induced damage to asphaltic concrete." Rep. No. 192, National Cooperative Highway Research Program, Transportation Research Board, Washington, D.C.
21. Lottman, R., and Dennis, L. G. (1970). "Pressure-induced stripping in asphaltic concrete." J. Transportation Research Board, 340, 13-25.
22. McGennis, R. B. Machemehl, R. B., and Kennedy, T. W. (1981). "Stripping and moisture damage in asphalt mixtures." TRB Research Rep. No. 253-1, Center for Transportation Research, Bureau of Engineering Research, Univ. of Texas, Austin, Tex.
23. Milkowski, W. (1985). "Catalytic modification of road asphalt by polyethylene." J. Transp. Eng., 111(1), 54-72.
24. Mohammed, A. A. (1993). Chemistry of polymers, Univ. of Mosul, Mosul, Iraq.
25. Putman, B. J., and Amirkhanian, S. N. (2004). "Utilization of waste fibers in stone matrix asphalt mixtures." Resour. Conserv. Recycl., 42, 265-274.
26. State Cooperation of Road and Bridges (SCRB). (1999). "Hot mix asphalt concrete pavements." Section R9, Iraqi standard specification, Baghdad-Iraq.
27. Swaminathan, C. G., and Nair, K. P. (1958). "A laboratory investigation on the stripping of bituminous binder from a coated road stone in the pressure of water." J. Indian Road Congress, 22(3).
28. Yang, H. H. (1993). Pavement analysis and design, Prentice-Hall, Englewood Cliffs, N.J.