Ablation mechanism of polymer layered silicate nanocomposite heat shield

Journal of Hazardous Materials

Volumn 166, Issue 1, 2009, Pages 445-454

  Bahramian, Ahmad Reza ^a   Kokabi, Mehrdad ^a  

^a Faculty of Engineering   (Iran)

Author keywords

Ablation mechanism; Ablative nanocomposite; Heat shields; Inverse analysis

Indexed keywords

ABLATION MECHANISM; ABLATIVE NANOCOMPOSITE; EXPERIMENTAL CONDITIONS; EXPERIMENTAL SET-UP; HEAT SHIELDS; HIGH TEMPERATURES; HIGH-TEMPERATURE DEGRADATIONS; INVERSE ANALYSIS; INVERSE SOLUTIONS; LAYERED-SILICATE NANOCOMPOSITES; MONTMORILLONITE LAYERED SILICATES; OXYACETYLENE FLAMES; POLYMER LAYERED SILICATE NANOCOMPOSITES; TOP SURFACES;

ABLATION; ABLATIVE MATERIALS; BALL MILLING; CLAY MINERALS; COMPOSITE MICROMECHANICS; ENERGY TRANSFER; HEAT SHIELDING; PHENOLIC RESINS; PHENOLS; POLYMERS; RESINS; SILICATE MINERALS; TEMPERATURE MEASUREMENT; THERMAL DIFFUSION; THERMAL DIFFUSIVITY;

NANOCOMPOSITES;

ASBESTOS; FLAME RETARDANT; MONTMORILLONITE; NANOCOMPOSITE; PHENOL DERIVATIVE; POLYMER; SILICATE;

ASBESTOS; COMPOSITE; DIFFUSIVITY; ENERGY FLUX; EXPERIMENTAL STUDY; INVERSE ANALYSIS; MASS TRANSFER; POLYMER; PYROLYSIS; RESIN; SILICATE;

ARTICLE; CALORIMETRY; COMPOSITE MATERIAL; CONE CALORIMETRY TEST; DIFFUSION; ENERGY TRANSFER; HIGH TEMPERATURE PROCEDURES; NANOCOMPOSITE HEAT SHIELD; NONHUMAN; OXYACETYLENE FLAME TEST; STEADY STATE;

ASBESTOS; BENTONITE; ENERGY TRANSFER; EQUIPMENT SAFETY; HOT TEMPERATURE; MODELS, THEORETICAL; NANOCOMPOSITES; POLYMERS; SILICATES;

EID: 67349261446     PISSN: 03043894     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2008.11.061     Document Type: Article

References (31)

1. Capitaneo J.L., Silva F.T., and Caffarena V.R. Aluminosilicate nanocomposite material. Appl. Mineral. 1 (2004) 45-48
2. Dabrowski F., Bourbigot S., Delobel R., and Bras M.L. Kinetic modeling of the thermal degradation of polyamide-6 nanocomposite. Eur. Polym. J. 36 (2000) 273-284
3. Zhang J., Jiang D.D., and Wilkie C.A. Fire properties of styrenic polymer clay nanocomposites based on an oligomerically-modified clay. Polym. Degrad. Stab. 91 (2006) 358-366
4. Sheng N., Boyce M.C., and Parks D.M. Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle. Polymer 45 (2004) 487-506
5. Gultek A., Seckin T., and Poly. (methacrylic) acid and methacryloxy propyltrimethoxy silane/clay nanocomposites prepared by in-situ polymerization. Turk. J. Chem. 26 (2002) 925-937
6. Deana D., Walkerb R., Theodoreb M., Hamptonb E., and Nyairo E. Chemorheology and properties of epoxy/layered silicate nanocomposites. Polymer 46 (2005) 3014-3021
7. Capitaneo J.L., Silva F.T., and Caffarena V.R. Preparation of layered polyvinyl chloride (PVC)-kaolinite nanocomposite. Appl. Mineral. 1 (2004) 53-56
8. Pandey J.K., Reddy K.R., Kumar A.P., and Singh R.P. An overview on the degradability of polymer nanocomposites. Polym. Degrad. Stab. 88 (2005) 234-250
9. Tolle T.B., and Anderson D.P. Morphology development in layered silicate thermoset nanocomposites. Composites Sci. Technol. 62 (2002) 1033-1041
10. Costache M.C., Wang D., Heidecker M.J., Manias E., and Wilkie C.A. The thermal degradation of poly (methyl methacrylate) nanocomposites with montmorillonite, layered double hydroxides and carbon nanotubes. Polym. Adv. Technol. 17 (2006) 272-280
11. Vaia R.A., Price G., Ruth P.N., Nguyen H.T., and Lichtenhan J. Polymer/layered silicate nanocomposites as high performance ablative materials. Appl. Clay Sci. 15 (1999) 67-92
12. Duquesnea S., Jamaa C., Brasa M.L., Delobelb R., Recourtc P., and Gloaguend J.M. Elaboration of EVA-nanoclay systems characterization. Composites Sci. Technol. 63 (2003) 1141-1148
13. A. Singh, High-temperature polymer/inorganic nanocomposites, United States Patent, May 2000; 6057035.
14. Zhu J., Start P., and Mauritz K.A. Thermal stability and flame retardancy of poly(methyl methacrylate)-clay nanocomposites. Polym. Degrad. Stab. 77 (2002) 253-258
15. Torre L., Kenny J.M., and Maffezzoli A.M. Degradation behaviour of a composite material for thermal protection systems, part II process simulation. J. Mater. Sci. 33 (1998) 3145-3149
16. Staggs J.E.J. Simple mathematical models of char forming polymers. Polym. Int. 49 (2000) 1147-1152
17. Staggs J.E.J. A simple model of polymer pyrolysis including transport of volatiles. Fire Saf. J. 32 (1999) 17-34
18. Watt S.D., Staggs J.E.J., McIntosh A.C., and Brindley J. A theoretical explanation of the influence of char formation on the ignition of polymers. Fire Saf. J. 36 (2001) 421-436
19. Lyon R.E. Pyrolysis kinetics of char forming polymers. Polym. Degrad. Stab. 61 (1998) 201-210
20. Resch C.L. Ablation models of thermal protection materials. Johns Hopkins APL Technical Digest 13 (1992) 426-431
21. Bahramian A.R., Kokabi M., Famili M.H.N., and Beheshty M.H. Ablation and thermal degradation behaviour of a composite based on resol type phenolic resin; process modeling and experimental. Polymer 47 (2006) 3661-3673
22. Kanevce L.D., and Kanevece G.H. Comparison of two kinds of experiments for estimation of thermal properties of ablative composite. 3rd International Conference on Inverse Problems in Engineering. June 13-18, Port Ludlow, Washington, USA (1999)
23. Dimitrienko Y.I., and Dimitrienkov I.D. Effect of thermo-mechanical erosion on heterogeneous combustion of composite materials in high-speed flows. Combust. Flame 122 (2000) 211-226
24. Staggs J.E.J. A simplified mathematical model for the pyrolysis of polymers with inert additives. Fire Saf. J. 32 (1999) 221-240
25. Bahramian A.R., Kokabi M., Beheshty M.H., and Famili M.H.N. Comparison of thermal degradation of a phenolic matrix composite in air and inert gas. 4th International and 7th National Seminar on Polymer Science and Technology. Tehran, Iran, September 27-29 (2005)
26. Dimitrienkov Y.I. Effect of finite deformations on internal heat-mass transfer in elastomer ablating materials. Int. J. Heat Mass Transfer 40 (1997) 699-709
27. Zong R., Hu Y., Wang S., and Song L. Evaluation of PC/ABS/montmorillonite nanocomposites. Polym. Degrad. Stab. 83 (2004) 423-428
28. Bahramian A.R., Kokabi M., Beheshty M.H., and Famili M.H.N. Thermal degradation process of resol type phenolic matrix/kaolinite layered silicate nanocomposite. Iranian Polym. J. 16 (2007) 375-387
29. Bahramian A.R., Kokabi M., Beheshty M.H., and Famili M.H.N. High temperature ablation of kaolinite layered silicate/phenolic resin/asbestos cloth nanocomposite. J. Hazard. Mater. 150 (2008) 136-145
30. Kashiwagi T., Harris R.H., Zhang X., Briber R.M., Cipriano B.H., Raghavan S.R., Awad W.H., and Shieds J.R. Flame retardant mechanism of polyamide 6-clay nanocomposites. Polymer 45 (2004) 881-891
31. Fornes T.D., and Paul D.R. Modeling properties of nylon 6/clay nanocomposites using composite theories. Polymer 44 (2003) 4993-5013