Characterization of modified carbon paste electrode by using Salen Schiff base ligand immobilized on SiO2-Al2O3 as a highly sensitive sensor for anodic stripping voltammetric determination of copper(II)

Sensors and Actuators, B: Chemical

Volumn 139, Issue 2, 2009, Pages 494-500

  Ghiaci, Mehran ^a   Rezaei, Behzad ^a   Arshadi, Mohammad ^a  

^a ISFAHAN UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Copper(II); Preconcentration; Salen Schiff base ligand; SiO2 Al2O3 mixed oxide; Voltammetry

Indexed keywords

ANODIC STRIPPING; CARBON PASTE ELECTRODE; CONCENTRATION OF; CONCENTRATION RANGES; COPPER CONTENT; DETECTION LIMITS; ELEMENTAL ANALYSIS; FTIR SPECTROSCOPY; HIGHLY SENSITIVE; LINEAR RESPONSE; MODIFIED CARBON PASTE ELECTRODE; PRECONCENTRATION; REAL SAMPLES; REGENERATION CYCLES; RELATIVE STANDARD DEVIATIONS; SALEN SCHIFF BASE LIGAND; SCHIFF-BASE LIGANDS; SIO2-AL2O3 MIXED-OXIDE; TAP WATER; VOLTAMMETRIC DETERMINATION;

ALUMINUM; COPPER; LIGANDS; SENSORS; SILICON COMPOUNDS; STRIPPING (DYES); VOLTAMMETRY;

COPPER OXIDES;

EID: 67349214199     PISSN: 09254005     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.snb.2009.03.050     Document Type: Article

References (51)

1. Moses P.R., Wier L., and Murray R.W. Chemically modified tin oxide electrode. Anal. Chem. 47 (1975) 1882-1886
2. Murray R.W. Chemically modified electrodes. Acc. Chem. Res. 13 (1980) 135-141
3. Murray R.W. In: Bard A.J. (Ed). Electroanalytical Chemistry vol. 13 (1984), Marcel Dekker, New York
4. Murray R.W., Ewing A.G., and Durst R.A. Chemically modified electrodes. Molecular design for electroanalysis. Anal. Chem. 59 (1987) 379A-390A
5. Patriarche G.J., Kauffmann J.-M., and Vire' J.-C. In: Dryhurst G., and Niki K. (Eds). Redox Chemistry & Interfacial Behavior of Biological Molecules (1988), Plenum Publishing Corporation 479-498
6. R.W. Murray (Ed.), Molecular design of electrodes surfaces, in: Techniques of Chemistry, vol. 22, Wiley, New York, 1992.
7. Titse A.M., Timinov A.M., and Shagisultanova G.A. Photosensitive chemically modified electrodes for photogalvanic cells. Coord. Chem. Rev. 125 (1993) 43-52
8. Svancara I., Vytras K., Barek J., and Zima J. Carbon paste electrodes in modern electroanalysis. Crit. Rev. Anal. Chem. 31 4 (2002) 311-345
9. Fernandez-Sanchez C., and Costa-Garcia A. Adsorption of immunoglobulin G on carbon paste electrodes as a basis for the development of immunoelectrochemical devices. Biosens. Bioelectron. 12 (1997) 403-413
10. Wang J., Cai X.H., Wang J.Y., Jonsson C., and Palecek E. Trace measurements of RNA by potentiometric stripping analysis at carbon paste electrodes. Anal. Chem. 67 (1995) 4065-4070
11. Kissinger P.T., and Heineman W.R. Laboratory Techniques in Electroanalytical Chemistry. 2nd ed. (1996), Dekker, New York
12. Wang J. Electroanalytical Chemistry. 2nd ed. (2000), Wiley, New York
13. Plueddemann E.P. Silane Coupling Agents (1991), Plenum Press, New York
14. Maschmeyer T. Derivatised mesoporous solids. Curr. Opin. Solid State Mater. Sci. 3 (1998) 71-78
15. Dong S., and Wang Y. The application of chemically modified electrodes in analytical chemistry. Electroanalysis 1 (1989) 99-106
16. Kalcher K. Chemically modified carbon paste electrodes in voltammetric analysis. Electroanalysis 2 (1990) 419-433
17. Arrigan D.W.M. Tutorial review. Voltammetric determination of trace metals and organics after accumulation at modified electrodes. Analyst 119 (1994) 1953-1966
18. Kalcher K., Kau.mann J.-M., Wang J., Svancara I., Vytras K., Neuhold C., and Yang Z. Sensors based on carbon paste in electrochemical analysis: a review with particular emphasis on the period 1990-1993. Electroanalysis 7 (1995) 5-22
19. Ugo P., and Moretto L.M. Ion-exchange voltammetry at polymer-coated electrodes: principles and analytical prospects. Electroanalysis 7 (1995) 1105-1113
20. K. Kalcher, K. Schachl, I. Svancara, K. Vytras, H. Alemu, Recent progress in the development of electrochemical carbon paste sensors, Sci. Pap. Univ. Pardubice A., 3 (1997, publ. 1998) 41-56.
21. Komljenovi J., Martinac V., and Radi N. Ion-sensitive behaviour of silver sulphide-based solid-state copper(II) and iodide electrodes in partially aqueous systems. Anal. Chim. Acta 231 (1990) 137-141
22. Neshkova M. Electrochemically prepared chalcogenide ion-selective membranes as an alternative to conventional pressed-pellet ion-selective electrodes. Anal. Chim. Acta 273 (1993) 255-265
23. De Marco R., Mackey D.J., and Zirino A. Response of the jalpaite membrane copper (II) ion-selective electrode in marine waters. Electroanalysis 9 (1997) 330-334
24. Chen Z., and Alexander P.W. Flow-injection potentiometric detection of metal ions based on tungsten oxide electrode. Electroanalysis 9 (1997) 141-144
25. Pungor E., Tóth K., Pápay M.K., Pólos L., Malissa H., Grasserbauer M., Hoke E., Ebel M.F., and Persy K. The surface morphology of ion-selective membrane electrodes: Part 2. Studies on the copper(II)-selective electrode. Anal. Chim. Acta 109 (1979) 279-290
26. Gismera M.J., Mendiola M.A., Procopio J.R., and Sevilla M.T. Copper potentiometric sensors based on copper complexes containing thiohydrazone and thiosemicarbazone ligands. Anal. Chim. Acta 357 (1999) 143-149
27. Ren K. A liquid-state copper(II) ion-selective electrode containing a complex of Cu(II) with salicylaniline. Talanta 36 (1989) 767-771
28. Kamata S., Bhale A., Fukunaga Y., and Murata H. Copper(II)-selective electrode using thiuram disulfide neutral carriers. Anal. Chem. 60 22 (1988) 2464-2467
29. Su C.-C., Ueng C.-H., and Liu L.K. Characteristics of Lariat Crown ether-copper(II) ion-selective electrodes. J. Chin. Chem. Soc. 48 (2001) 733-738
30. Pleniceanu M., Preda M., Huresam N., and Simoiu L. New liquid-membrane electrodes used for the determination of copper and nickel. Anal. Lett. 29 (1996) 1485-1496
31. Audebert P., Calas P., Cerveau G., Corriu R.J.P., and Costa N. Modified electrodes from organic-inorganic hybrid gels containing ferrocene units covalently bonded inside a silica network. J. Electroanal. Chem. 372 (1994) 275-277
32. Yang Q., Atanasov P., Wilkins E., and Hughes R.C. Enzyme electrodes with glucose oxidase immobilized on stber glass beads. Anal. Lett. 28 (1995) 2439-2457
33. Kubota L.T., Gouvea F., Andrade A.N., Milagres B.G., and de Oliveira Neto G. Electrochemical sensor for NADH based on Meldola's blue immobilized on silica gel modified with titanium phosphate. Electrochim. Acta 41 (1996) 1465-1469
34. Gardea-Torresdey J., Darnall D., and Wang J. Bioaccumulation and measurement of copper at an alga-modified carbon paste electrode. Anal. Chem. 60 (1988) 72-76
35. Agraz R., Sevilla M.T., and Hernandez L. Copper speciation analysis using a chemically modified electrode. Anal. Chim. Acta 283 (1993) 650-656
36. Won M.S., Park J.H., and Shim Y.B. Determination of copper(I) ion with a chemically modified carbon paste electrode based on di(2-imino-cyclopentylidine mercaptomethyl) disulfide. Electroanalysis 5 (1993) 421-426
37. Gao Z., Ivaska A., and Li P. Determination of trace amounts of copper(I) with a chemically modified carbon paste electrode. Anal. Sci. 8 (1992) 337-343
38. Safavi A., Pakniat M., and Maleki N. Design and construction of a flow system for determination of Cu(II) ions in water by means of a chemically modified carbon paste electrode. Anal. Chim. Acta 335 (1996) 275-282
39. 3 mixed-oxide modified carbon paste electrode for anodic stripping voltammetric determination of Pb(II). Talanta 73 (2007) 37-45
40. Rezaei B., Ghiaci M., and Sedaghat M.E. A selective modified bentonite-porphyrin carbon paste electrode for determination of Mn(II) by using anodic stripping voltammetry. Sens. Actuators B 131 (2008) 439-447
41. Takeuchi R.M., Santos A.L., Padilha P.M., and Stradiotto N.R. Copper determination in ethanol fuel by differential pulse anodic stripping voltammetry at a solid paraffin-based carbon paste electrode modified with 2-aminothiazole organofunctionalized silica. Talanta 71 (2007) 771-777
42. Sayen S., and Walcarius A. Electrochemical modulation of the ligand properties of organically modified mesoporous silicas. J. Electroanal. Chem. 581 (2005) 70-78
43. Alpat S.K., Yuksel U., and Akcay H. Development of a novel carbon paste electrode containing a natural zeolite for the voltammetric determination of copper. Electrochem. Commun. 7 (2005) 130-134
44. Alemu H., and Chandravanshi B.S. Differential pulse anodic stripping voltammetric determination of copper(II) with N-phenylcinnamohydroxamic acid modified carbon paste electrodes. Anal. Chim. Acta 368 (1998) 165-173
45. Liu N., and Song J.F. Catalytic adsorptive stripping voltammetric determination of copper(II) on a carbon paste electrode. Anal. Bioanal. Chem. 383 (2005) 358-364
46. Sherigara B.S., Shivaraj Y., Mascarenhas R.J., and Satpati A.K. Simultaneous determination of lead, copper and cadmium onto mercury film supported on wax impregnated carbon paste electrode. Assessment of quantification procedures by anodic stripping voltammetry. Electrochim. Acta 52 (2007) 3137-3142
47. Gismera M.J., Hueso D., Procopio J.R., and Sevilla M.T. Ion-selective carbon paste electrode based on tetraethyl thiuram disulfide for copper(II) and mercury(II). Anal. Chim. Acta 524 (2004) 347-353
48. Abbaspour A., and Moosavi S.M.M. Chemically modified carbon paste electrode for determination of copper(II) by potentiometric method. Talanta 56 (2002) 91-96
49. Ruiperez J., Mendiola M.A., Sevilla M.T., Procopio J.R., and Hernandez L. Application of a macrocyclic thiohydrazone modified carbon paste electrode to copper speciation in water simples. Electroanalysis 14 (2002) 532-539
50. Shamsipur M., Tashkhourian J., Hemmateenejad B., and Sharghi H. Application of artificial neural network to simultaneous potentiometric determination of silver(I), mercury(II) and copper(II) ions by an unmodified carbon paste electrode. Talanta 64 (2004) 590-596
51. Canpolat E.C., Sar E., Coskun N.Y., and Cankurtaran H. Determination of trace amounts of copper in tap water samples with a Calix[4]arene modified carbon paste electrode by differential pulse anodic stripping voltammetry. Electroanalysis 19 (2007) 1109-1115