Finite-element modeling of rate dependent mechanical properties in nanocrystalline materials

Computational Materials Science

Volumn 45, Issue 4, 2009, Pages 1113-1124

  Kadkhodapour, J ^a   Ziaei Rad, S ^a   Karimzadeh, F ^a  

^a ISFAHAN UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Dislocation density; Finite element; Implementation; Nanocrystalline material; Rate sensitivity; Tensile test

Indexed keywords

DISLOCATION DENSITY; FINITE ELEMENT; IMPLEMENTATION; RATE SENSITIVITY; TENSILE TEST;

AMORPHOUS MATERIALS; CONSTITUTIVE EQUATIONS; CURVE FITTING; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; MATERIALS PROPERTIES; MECHANICAL PROPERTIES; POLYCRYSTALS; STRESS-STRAIN CURVES; TENSILE TESTING;

NANOCRYSTALLINE MATERIALS;

EID: 67349204022     PISSN: 09270256     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.commatsci.2009.01.014     Document Type: Article

References (36)

1. Gleiter H. Nanocrystalline materials. Prog. Mater. Sci. 33 (1989) 223-315
2. Sanders D.G., Eastman J.A., and Weertman J.R. Elastic and tensile behavior of nanocrystalline copper and palladium. Acta Mater. 45 (1997) 4019-4025
3. 3 nanocomposite by mechanical alloying. Mater. Sci. Eng. A 486 (2008) 45-48
4. Mousavi T., Karimzadeh F., and Abbasi M.H. Synthesis and characterization of nanocrystalline NiTi intermetallic by mechanical alloying. Mater. Sci. Eng. A 478 (2008) 46-51
5. Tavoosi M., Enayati M.H., and Karimzadeh F. Softening behaviour of nanostructured Al-14 wt% Zn alloy during mechanical alloying. J. Alloys Compd. 464 (2008) 107-110
6. Wei Y.J., Su C., and Anand L. A computational study of the mechanical behavior of nanocrystalline fcc metals. Acta Mater. (2006) 3177-3190
7. Fu H.H., Benson D.J., and Meyers M.A. Computational description of nanocrystalline deformation based on crystal plasticity. Acta Mater. 52 (2004) 4413-4425
8. Fu H.H., Benson D.J., and Meyers M.A. Analytical and computational description of effect of grain size on the yield stress of metals. Acta Mater. 49 (2001) 2567-2582
9. Kim H.S., Estrin Y., and Bush M.B. Plastic deformation behaviour of fine-grained materials. Acta Mater. 48 (2000) 493-504
10. Kim H.S., Hong S.I., and Kim S.J. On the rule of mixtures for predicting the mechanical properties of composites with homogeneously distributed soft and hard particles. J. Mater. Proc. Tech. 112 (2001) 109-113
11. Capolungo L., Cherkaoui M., and Qu J. On the elastic-viscoplastic behavior of nanocrystalline materials. Int. J. Plasticity 23 (2007) 561-591
12. Capolungo L., Cherkaoui M., McDowell D.L., Qu J., and Jacob K.I. Dislocation nucleation from bicrystal interfaces and grain boundary ledges: Relationship to nanocrystalline deformation. J. Mech. Phys. Sol. 55 (2007) 2300-2327
13. Jiang B., and Weng G.J. A generalized self-consistent polycrystal model for the yield strength of nanocrystalline materials. J. Mech. Phys. Sol. (2004) 1125-1149
14. Christensen R.M., and Lo K.H. Solutions for effective shear properties in three phase sphere and cylinder models. J. Mech. Phys. Sol. (1979) 315-330
15. Drucker D.C. Some implications of work hardening and ideal plasticity. Quart. Appl. Math. (1950)
16. Yamakov V., Wolf D., Phillpot S.R., and Gleiter H. Grain-boundary diffusion creep in nanocrystalline palladium by molecular-dynamics simulation. Acta Mater. (2002) 61-73
17. Wei Y.J., and Anand L. Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals. J. Mech. Phys. Sol. 52 (2004) 2587-2616
18. Meyers M.A., and Ashworth E. Model for the effect of grain size on the yield stress of metals. Philos. Mag. A: Phys. Condens. Mat. Defects Mech. Prop. 46 (1982) 737-759
19. Karimzadeh F., Ziaei-rad S., and Adibi S. Modeling consideration and material properties evaluation in analysis of carbon nano-tube composite. Metall. Mater. Trans. B 38 (2007) 695-705
20. Schiotz J., Vegge T., Di-Tolla F.D., and Jacobsen K.W. Atomic-scale simulations of the mechanical deformation of nanocrystalline metals. Phys Rev B 60 (1999) 11971-11983
21. Schwaiger R., Moser B., Dao M., Chollacoop N., and Suresh S. Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel. Acta Mater. (2003) 5159-5172
22. Rafii-Tabar H., Shodja H.M., Darabi M., and Dahi A. Molecular dynamic simulation of crack propagation in F.C.C. materials containing clusters of impurities. Mech. Mater. 38 (2006) 243-252
23. Kocks U.F. Laws for work-hardening and low temperature creep. J. Eng. Mater. Tech. 98 (1976) 76-85
24. Mecking H., and Kocks U.F. Kinetics of flow and strain-hardening. Acta Mater. 29 (1981) 1865-1875
25. Estrin Y., and Mecking H. A unified phenomenological description of work hardening and creep based on one-parameter models. Acta Metall. 32 (1984) 57-70
26. Estrin Y. Dislocation-density-related constitutive modeling. In: Krausz A.S., and Krausz K. (Eds). Unified Constitutive Laws of Plastic Deformation (1996), Academic Press, San Diego, CA 69-106
27. Crisfield M.A. Non-linear Finite Element Analysis of Solids and Structures, Vol. 1: Essentials (1991), John Wiley & Sons, Chichester
28. Belytschko T., Liu W.K., and Moran B. Nonlinear Finite Elements for Continua and Structures (2000), John Wiley & Sons
29. Peirce D., Shih C.F., and Needleman A. A tangent modulus method for rate dependent solids. Comput. Struct. (1984) 875-887
30. Dunne F., and Petrinic N. Introduction to Computational Plasticity (2005), Oxford University Press
31. Mercier S., Molinari A., and Estrin Y. Grain size dependence of strength of nanocrystalline materials as exemplified by copper: an elastic-viscoplastic modeling approach. J. Mater. Sci. (2007) 1455-1465
32. Kim H.S., Bush M.B., and Estrin Y. A phase mixture model of a particle reinforced composite with fine microstructure. Mater. Sci. Eng. A 276 (2000) 175-185
33. Youngdahl C.J., Sanders P.G., Eastman J.A., and Weertman J.R. Compressive yield strengths of nanocrystalline Cu and Pd. Scr. Mater. 37 (1997) 809-813
34. Lu L., Schwaiger R., Shan Z.W., Dao M., Lu K., and Suresh S. Nano-sized twins induce high rate sensitivity of flow stress in pure copper. Acta Mater. 53 (2005) 2169-2179
35. Khan A.S., Suh Y.S., Chen X., Takacs L., and Zhang H. Nanocrystalline aluminum and iron: Mechanical behavior at quasi-static and high strain rates, and constitutive modeling. Int. J. Plasticity 22 (2006) 195-209
36. Holland J.H. Adaptation in Natural and Artificial Systems (1975), University of Michigan Press, Ann Arbor, Michigan