Cold roll bonding of multi-layered bi-metal laminate composites

Composites Science and Technology

Volumn 69, Issue 10, 2009, Pages 1667-1675

  Chaudhari, Gajanan P ^a   Acoff, Viola ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

^b University of Alabama   (United States)

Author keywords

A. Laminate; B. Plastic deformation; C. Anisotropy; D. SEM; E. Welding

Indexed keywords

A. LAMINATE; B. PLASTIC DEFORMATION; C. ANISOTROPY; D. SEM; E. WELDING;

ANISOTROPY; DISSIMILAR METALS; LAMINATES; PLASTIC DEFORMATION; WELDING;

ROLL BONDING;

ANISOTROPY; BONDING; COMPOSITE; DEFORMATION; LAMINATE; METAL; WELDING;

EID: 67349180759     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2009.03.018     Document Type: Article

References (35)

1. Carreno F., Chao J., Pozuelo M., and Ruano O.A. Microstructure and fracture properties of an ultrahigh carbon steel-mild steel laminated composite. Scripta Mater 48 (2003) 1135-1140
2. Kubel Jr. E.J. Laminated metals provide tailor-made properties. Mater Eng 102 (1985) 23-26
3. Kum D.W., Oyama T., Wadsworth J., and Sherby O.D. The impact properties of laminated composites containing ultrahigh carbon (UHC) steels. J Mech Phys Solids 31 (1983) 173-186
4. Moore J.J., Wilson D.V., and Roberts W.T. Fabrication of formable metal-metal composites. Mater Sci Eng 48 (1981) 113-121
5. Wu H.-.Y., Lee S., and Wang J.-.Y. Solid-state bonding of iron-based alloys, steel-brass, and aluminum alloys. J Mater Proc Technol 75 (1998) 173-179
6. 3 Ti metal-intermetallic laminate composites. Mater Sci Eng A443 (2007) 1-15
7. Luo J.G., and Acoff V.L. Using cold roll bonding and annealing to process Ti/Al multi-layered composites from elemental foils. Mater Sci Eng A379 (2004) 164-172
8. Masahashi N., Watanabe S., Nomura N., Semboshi S., and Hanada S. Laminates based on an iron aluminide intermetallic alloy and a CrMo steel. Intermetallics 13 (2005) 717-726
9. 2Ni laminate composites. J Alloy Compd 386 (2005) 253-257
10. Battezzati L., Pappalepore P., Durbiano F., and Gallino I. Solid state reactions in Al/Ni alternate foils induced by cold rolling and annealing. Acta Mater 47 (1991) 901-914
11. Goda D.J., Richards N.L., Caley W.F., and Chaturvedi M.C. The effect of processing variables on the structure and chemistry of Ti-aluminide based LMCS. Mater Sci Eng A334 (2002) 280-290
12. Vaidyanath L.R., Nicholas M.G., and Milner D.R. Pressure welding by rolling. Br Weld J 6 (1959) 13-28
13. Cave J.A., and Williams J.D. Mechanism of cold pressure welding by rolling. J Inst of Met (London) 101 (1973) 203-207
14. Bay N. Mechanisms producing metallic bonds in cold welding. Weld J 62 (1983) 137s-142s
15. Ershov A.A., Myl'nikov A.S., and Sycheva T.A. Conditions of joint formation in dissimilar metals during combined cold rolling. Mech Compos Mater 21 (1985) 84-87
16. Clemensen C., Juelstorp O., and Bay N. Cold welding-Part 3 Influence of surface preparation on bond strength. Met Construct 18 (1986) 625-629
17. Zhang W., and Bay N. Cold welding-experimental investigation of the surface preparation methods. Weld J 76 (1997) 326s-330s
18. Shtertser A.A. Welding wave on the contact spot of solids. Tribol Int 31 (1998) 169-174
19. Steinlage G.A., Bowman K.J., and Trumble K.P. A comparison of three mechanical models for cold roll bonding metal laminates. J Adhes Sci Technol 10 (1996) 199-229
20. Steif P.S. Interfacial instabilities in an unbonded layered solid. Int J Solid Struct 26 (1990) 915-925
21. Suzuki H., Araki J., Aiba M., Shintani K., and Furugen M. Studies on deformation mechanism in rolling double layered metal sheets. Rep Inst Ind Sci Univ Tokyo 25 (1975) 51-80
22. Lee S., and Lee D.N. Slab analysis of roll bonding of silver clad phosphor bronze sheets. Mater Sci Technol 7 (1990) 1042-1050
23. Tzou G.Y. Theoretical study on the cold sandwich sheet rolling considering Coulomb friction. J Mater Proc Technol 114 (2001) 41-50
24. Tzou G.Y., Tieu A.K., Huang M.N., Lin C.Y., and Wu E.Y. Analytical approach to the cold-and-hot bond rolling of sandwich sheet with outer hard and inner soft layers. J Mater Proc Technol 125-126 (2002) 664-669
25. Kiuchi M., Shintani K., and Hwang Y.M. Mathematical simulation of clad sheet rolling and sandwich sheet rolling. Annals CIRP-Manuf Technol 41 (1992) 289-292
26. Hwang Y.M., Hsu H., and Lee H. Analysis of sandwich sheet rolling by stream function method. Int J Mech Sci 37 (1995) 297-315
27. Hwang Y.M., Hsu H., and Hwang Y. Analytical and experimental study on bonding behavior at the roll gap during complex rolling of sandwich sheets. Int J Mech Sci 42 (2000) 2417-2437
28. Yong J., Dashu P.., Dong L.., and Luoxing L.. Analysis of clad sheet bonding by cold rolling. J Mater Proc Technol 105 (2000) 32-37
29. Hosford W.F., and Caddell R.M. Metal forming: mechanics and metallurgy. 2nd ed. (1993), Prentice Hall, Englewood Cliffs (NJ)
30. Dieter G.E. Mechanical Metallurgy. 3rd ed. (1986), McGraw-Hill Inc, NY
31. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proc Royal Soc London-Series A, Math Phys Sci 193 (1948) 281-297
32. Hill R. The mathematical theory of plasticity (1950), Oxford University Press, London
33. Chapra S.C., and Canale R.P. Numerical methods for engineers. 2nd ed. (1988), McGraw-Hill Inc, NY
34. Chamanfar A., and Mahmudi R. Ti sheet: the effect of gage length and width measurement on plastic strain ratio. JOM 56 (2004) 49-52
35. Kalpakjian S., and Schmid S.R. Manufacturing engineering and technology. 4th ed. (2001), Prentice-Hall Inc., NJ