Calibration of a constitutive model for the post-yield behaviour of cortical bone

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 2, Issue 5, 2009, Pages 460-470

  Mullins, L P ^a   Bruzzi, M S ^a   McHugh, P E ^a  

^a NATIONAL UNIVERSITY OF IRELAND   (Ireland)

Author keywords

[No Author keywords available]

Indexed keywords

CONSTITUTIVE LAW; CORTICAL BONE; DEFORMATION MECHANISM; DRUCKER PRAGER MODEL; FINITE ELEMENT MODELLING; FRICTIONAL MECHANISMS; INDENTER; LOAD-DISPLACEMENT CURVE; NANOINDENTATION TESTING; NANOINDENTATION TESTS; PILE-UP; PRESSURE DEPENDENCE; PRESSURE DEPENDENT; YIELD BEHAVIOUR;

ATOMIC FORCE MICROSCOPY; ATOMS; CONSTITUTIVE MODELS; DEFORMATION; NANOINDENTATION; SURFACE TESTING;

BONE;

ACCURACY; ANIMAL TISSUE; ARTICLE; ATOMIC FORCE MICROSCOPY; BONE DEFORMATION; CALIBRATION; CORTICAL BONE; ENERGY YIELD; FINITE ELEMENT ANALYSIS; FRICTION; HUMAN; HUMAN TISSUE; NANOANALYSIS; NONHUMAN; PRIORITY JOURNAL; SIMULATION; SURFACE PROPERTY; VALIDATION PROCESS;

ANIMALS; BONE AND BONES; CALIBRATION; CATTLE; COMPRESSIVE STRENGTH; FINITE ELEMENT ANALYSIS; HARDNESS TESTS; HUMANS; MICROSCOPY, ATOMIC FORCE; MODELS, BIOLOGICAL; NANOTECHNOLOGY; PRESSURE; REPRODUCIBILITY OF RESULTS; SHEEP; WEIGHT-BEARING;

EID: 67349172753     PISSN: 17516161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2008.11.003     Document Type: Article

References (59)

1. ABAQUS. Analysis User's Manual (2005), ABAQUS Inc., Pawtucket, RI, USA
2. Alkorta J., Martanez-Esnaola J.M., and Sevillano J.G. Absence of one-to-one correspondence between elastoplastic properties and sharp-indentation load-penetration data. Journal of Materials Research 20 2 (2005) 432-437
3. Ascenzi A., Benvenuti A., and Bonucci E. The tensile properties of single osteonic lamellae: Technical problems and preliminary results. Journal of Biomechanics 15 1 (1982) 29-37
4. Barthel E., Perriot A., Chateauminois A., and Fretigny C. Elastic contact to nearly incompressible coatings: Stiffness enhancement and elastic pile-up. Philosophical Magazine 86 33 (2006) 5359-5369
5. Bayraktar H.H., and Keaveny T.M. Mechanisms of uniformity of yield strains for trabecular bone. Journal of Biomechanics 37 11 (2004) 1671-1678
6. Bayraktar H.H., Morgan E.F., Niebur G.L., Morris G.E., Wong E.K., and Keaveny T.M. Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue. Journal of Biomechanics 37 1 (2004) 27-35
7. Bembey A., Oyen M., Bushby A., and Boyde A. Viscoelastic properties of bone as a function of hydration state determined by nanoindentation. Philosophical Magazine 86 33 (2006) 5691-5703
8. Biwa S., and Storakers B. An analysis of fully plastic brinell indentation. Journal of Mechanics and Physics and Solids 43 8 (1995) 1303-1333
9. Briscoe B.J., Jones Parry E., and Tabor D. The Friction of Polymers Under Hydrostatic Pressure. Wear 30 (1974) 127-134
10. Briscoe B.J., and Tabor D. The Effect of Pressure on the Frictional Properties of Polymers. Wear 34 (1975) 29-38
11. Burr D.B., Schaffler M.B., and Frederickson R.G. Composition of the cement line and its possible mechanical role as a local interface in human compact bone. Journal of Biomechanics 21 11 (1988) 939-941
12. Burstein A.H., Reilly D.T., and Martens M. Aging of bone tissue: Mechanical properties. Journal of Bone and Joint Surgery (American) 58 1 (1976) 82-86
13. Burstein A.H., Zika J.M., Heiple K.G., and Klein L. Contribution of collagen and mineral to the elastic-plastic properties of bone. Journal of Bone and Joint Surgery (American) 57 7 (1975) 956-961
14. Carden A., Rajachar R.M., Morris M.D., and Kohn D.H. Ultrastructural changes accompanying the mechanical deformation of bone tissue: A Raman imaging study. Calcified Tissue International 72 2 (2003) 166-175
15. Caré G., and Fischer-Cripps. Elastic-plastic indentation stress fields using the finite-element method. Journal of Materials Research 32 (1997) 5653-5659
16. Chen X., Ogasawara N., Zhao M., and Chiba N. On the uniqueness of measuring elastoplastic properties from indentation: The indistinguishable mystical materials. Journal of the Mechanics and Physics of Solids 55 8 (2007) 1618-1660
17. Drucker D.C., and Prager W. Soil mechanics and plastic analysis or limt design. Quartely of Applied Mathematics (1943)
18. Fan Z., and Rho J.Y. Effects of viscoelasticity and time-dependent plasticity on nanoindentation measurements of human cortical bone. Journal of Biomedical Materials Research Part A 67A 1 (2003) 208-214
19. Fan Z., and Rho J.Y. Three-dimensional finite element analysis of the effects of anisotropy of bone mechanical properties measured by nanoindentation. Journal of Materials Research 19 1 (2004) 114-123
20. Fan Z., Swadener J.G., Rho J.Y., Roy M.E., and Pharr G.M. Anisotropic properties of human tibial cortical bone as measured by nanoindentation. Journal of Orthopaedic Research 20 4 (2002) 806-810
21. Farrissey L.M., and McHugh P.E. Determination of elastic and plastic material properties using indentation: Development of method and application to a thin surface coating. Materials Science and Engineering: A 399 1-2 (2005) 254-266
22. Giannakopoulos A.E., and Suresh S. Determination of elastoplastic properties by instrumented sharp indentation. Scripta Materiala 40 10 (1999) 1191
23. Gupta, H.S., Seto, J., Wagermaier, W., Zaslansky, P., Boesecke, P., Fratzl, P., 2006. Cooperative deformation of mineral and collagen in bone at the nanoscale. In: Procedings of the National Acadamey of Science, U S A 103(47), pp. 17741-17746
24. Harrison N.O., O'Mahoney D., McDonnell P., and McHugh P.E. Damage and failure of trabecular bone with non-linear geometry and inhomogeneous material properties. Journal of Biomechanics 39 (2006) (Suppl. 1)
25. Hengsberger S., Kulik A., and Zysset P.K. A combined atomic force microscopy and nanoindentation technique to investigate the elastic properties of bone structural units. European Cells and Materials 1 (2001) 12-17
26. Homminga J., McCreadie B.R., Weinans H., and Huiskes R. The dependence of the elastic properties of osteoporotic cancellous bone on volume fraction and fabric. Journal of Biomechanics 36 10 (2003) 1461-1467
27. Jepsen K.J., Davy D.T., and Krzypow D.J. The role of the lamellar interface during torsional yielding of human cortical bone. Journal of Biomechanics 32 3 (1999) 303-310
28. Johnson, W.M., Rapoff, A.J., 2003. Characterization of the microindentation of bone via scanning electron microscopy. In: Proc. Summer Bioengineering Conference
29. Johnson W.M., and Rapoff A.J. Microindentation in bone: Hardness variation with five independent variables. Journal of Materials Science: Materials in Medicine 18 4 (2007) 591-597
30. Kemper A.R., McNally C., Kennedy E.A., Manoogian S.J., Rath A.L., Ng T.P., Stitzel J.D., Smith E.P., Duma S.M., and Matsuoka F. Material properties of human rib cortical bone from dynamic tension coupon testing. Stapp Car Crash Journal 49 (2005) 199-230
31. Keyak J.H., and Rossi S.A. Prediction of femoral fracture load using finite element models: An examination of stress and strain based failure theories. Journal of Biomechanics 33 2 (2000) 209-214
32. Klein-Nulend J., van der Plas A., Semeins C., Ajubi N., Frangos J., Nijweide P., and Burger E. Sensitivity of osteocytes to biomechanical stress in vitro. The FASEB Journal 9 5 (1995) 441-445
33. Lichinchi M., Lenardi C., Haupt J., and Vitali R. Simulation of Berkovich nanoindentation experiments on thin films using finite element method. Thin Solid Films 312 1-2 (1998) 240-248
34. McCalden R., McGeough J., Barker M., and Court-Brown C. Age-related changes in the tensile properties of cortical bone. The relative importance of changes in porosity, mineralization, and microstructure. Journal of Bone and Joint Surgery (American) 75 8 (1993) 1193-1205
35. Mercer C., He M.Y., Wang R., and Evans A.G. Mechanisms governing the inelastic deformation of cortical bone and application to trabecular bone. Acta Biomateriala 2 1 (2006) 59-68
36. Mesarovic, S., Fleck, N., 1987. spherical indentation of elastic-plastic solids. In: Proc. Mathematical, Physical and Engineering Sciences 455, pp. 2707-2728
37. Morgan E.F., Bayraktar H.H., and Keaveny T.M. Trabecular bone modulus-density relationships depend on anatomic site. Journal of Biomechanics 36 7 (2003) 897-904
38. Mullins L.P., Bruzzi M.S., and McHugh P. Measurement of the microstructural fracture toughness of cortical bone using indentation fracture. Journal of Biomechanics 40 14 (2007) 3285-3288
39. Niebur G.L., Feldstein M.J., Yuen J.C., Chen T.J., and Keaveny T.M. High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone. Journal of Biomechanics 33 12 (2000) 1575-1583
40. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Materials Research Society 76 (1992) 1564-1583
41. Ramrakhiani M., Pal D., and Murty T.S. Micro-indentation hardness studies on human bones. Acta Anat (Basel) 103 3 (1979) 358-362
42. Reed K.L., and Brown T.D. Elastic modulus and strength of emu cortical bone. Iowa Orthop J 21 (2001) 53-57
43. Reilly D.T., and Burstein A.H. The elastic and ultimate properties of compact bone tissue. Journal of Biomechanics 8 6 (1975) 393-396
44. Rho J.Y., Roy II M.E., Tsui T.Y., and Pharr G.M. Elastic properties of microstructural components of human bone tissue as measured by nanoindentation. Journal of Biomedical Materials Research Part A 45 1 (1999) 48-54
45. Rho J.Y., Zioupos P., Currey J.D., and Pharr G.M. Variations in the individual thick lamellar properties within osteons by nanoindentation. Bone 25 3 (1999) 295-300
46. Robinson R.A. Physicochemical structure of bone. Clinical Orthopaedics and Related Research 112 (1975) 263-315
47. Siegmund, T., Allen, M.R., Burr, D.B., 2007. A ductile-to-brittle transition in bone failure due to non-enzymatic collagen-crosslinks - a computational study. In: Proc. 53rd Orthopaedic Research Society
48. Stolken J.S., and Kinney J.H. On the importance of geometric nonlinearity in finite-element simulations of trabecular bone failure. Bone 33 4 (2003) 494-504
49. Tai K., Ulm F.J., and Ortiz C. Nanogranular origins of the strength of bone. Nano Letters 6 11 (2006) 2520-2525
50. Thompson J.B., Kindt J.H., Drake B., Hansma H.G., Morse D.E., and Hansma P.K. Bone indentation recovery time correlates with bond reforming time. Nature 414 6865 (2001) 773-776
51. Turner C.H., Rho J., Takano Y., Tsui T.Y., and Pharr G.M. The elastic properties of trabecular and cortical bone tissues are similar: Results from two microscopic measurement techniques. Journal of Biomechanics 32 4 (1999) 437-441
52. von Mises, R., 1913. Mechanik der festen Körper im plastisch-deformablen Zustand. In: Nachr, Königl. Ges. Wiss. Göttingen, math. phys. Kl, pp. 582-593
53. Wang, X., 2004. Role of collagen in post yield energy dissapation in bone. In: Proceedings of the 50th Annual Orthopedic Research Society
54. Wang X., Bank R.A., TeKoppele J.M., and Mauli Agrawal C. The role of collagen in determining bone mechanical properties. Journal of Orthopaedic Research 19 6 (2001) 1021-1026
55. Wang, X., Xiaoe, L., Shen, X., Agrawal, C., 2001b. Collagen denaturation and age-related changes in the toughness of bone. BED, Bioengineering Conference 50
56. Wang X., Yoon Y.J., and Ji H. A novel scratching approach for measuring age-related changes in the in situ toughness of bone. Journal of Biomechanics 40 6 (2007) 1401-1404
57. Yeni Y.N., and Fyhrie D.P. A rate-dependent microcrack-bridging model that can explain the strain rate dependency of cortical bone apparent yield strength. Journal of Biomechanics 36 9 (2003) 1343-1353
58. Zioupos P. In vivo fatigue microcracks in human bone: Material properties of the surrounding bone matrix. European Journal of Morphology 42 1/2 (2005) 31-41
59. Zysset P.K., Edward Guo X., Edward Hoffler C., Moore K.E., and Goldstein S.A. Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur. Journal of Biomechanics 32 10 (1999) 1005-1012