On twinning and shear banding in a Cu-8 at.% Al alloy plane strain compressed at 77 K

International Journal of Plasticity

Volumn 25, Issue 8, 2009, Pages 1588-1608

  Paul, H ^a   Morawiec, A ^a   Driver, J H ^b   Bouzy, E ^c  

^a INSTITUTE OF METALLURGY AND MATERIALS SCIENCE   (Poland)

^b ECOLE DES MINES DE SAINT ETIENNE   (France)

^c UNIVERSITÉ PAUL VERLAINE METZ   (France)

Author keywords

Copper aluminium alloy; Deformation twinning; Shear bands; TEM orientation mapping; Texture

Indexed keywords

AL ALLOYS; CRYSTAL LATTICE ROTATIONS; CRYSTAL PLANES; DEFORMATION TWINNING; DEFORMATION TWINS; DISLOCATION MECHANISMS; DISLOCATION SLIPS; FCC METALS; INITIAL TEXTURES; KINK BANDS; LOW STACKING FAULT ENERGIES; MACRO-SCALE; MATRIX LAYERS; MATRIXES; PLANE STRAINS; RE ORIENTATIONS; SHEAR BANDING; SHEAR DIRECTIONS; SLIP PROPAGATION; TEM ORIENTATION MAPPING; TEXTURE EVOLUTIONS; TEXTURE TRANSFORMATIONS;

ALUMINUM; ALUMINUM ALLOYS; COPPER ALLOYS; CRYSTAL LATTICES; CRYSTAL MICROSTRUCTURE; DEFORMATION; DISLOCATIONS (CRYSTALS); SHEAR BANDS; SINGLE CRYSTALS; TEXTURES; TRANSMISSION ELECTRON MICROSCOPY;

CRYSTAL ORIENTATION;

EID: 67349141719     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.10.003     Document Type: Article

References (60)

1. Anand L., and Spitzig W.A. Initiation of locallized shear bands in plane tension test. Journal of Mechanics and Physics of Solids 28 (1980) 113-125
2. Asaro R.J., and Rice J.R. Strain localization in ductile single crystals. Journal of Mechanics and Physics of Solids 25 (1977) 309-321
3. Batra R.C., and Wei Z.G. Shear band due to heat flux predicted at boundaries. International Journal of Plasticity 22 (2006) 1-15
4. Beyerlein I.J., and Tomé C.N. A dislocation-based constitutive law for pure Zr including temperature effects. International Journal of Plasticity 24 (2008) 867-895
5. Blicharski M., and Gorczyca S. Structural inhomogeneity of deformed austenitic stainless steel. Metals Science 12 (1978) 303-312
6. Canova G.R., Fressengeas C., Molinari A., and Kocks U.F. Effect of rate sensitivity on slip system activity and lattice rotation. Acta Metallurgica 36 (1988) 1961-1970
7. Cazacu O., Plunkertt B., and Barlat F. Orthotropic yield criterion for hexagonal closed packet metals. International Journal of Plasticity 22 (2006) 1171-1194
8. Charalambakis N., and Baxevanis T. Adiabatic shearing of non-homogeneous thermoviscoplastic materials. International Journal of Plasticity 20 (2004) 899-914
9. Chatzigeorgiu G., and Charalambakis N. Instability analysis of non-homogeneous materials under biaxial loading. International Journal of Plasticity 21 (2005) 1970-1999
10. Da Costa Viana, C.S., Parades, J.C., Pinto, A.L., Lopez, A.M., 1999. In: Szpunar, J. (Ed.), Proceeding of the 12th International Conference on Textures of Materials, EBSD Analysis of Shear Banding in α-Brass, Transaction Technical Publication Toronto, Canada, pp. 671-676.
11. Dillamore I.L., Roberts J.G., and Bush A.C. Occurrence of shear bands in early rolled cubic metals. Metal Science 13 (1979) 73-75
12. Donadille C., Valle R., Dervin P., and Penelle R. Development of texture and microstructure during cold-rolling and annealing of fcc alloys: example of an austenitic stainless steel. Acta Metallurgica 32 (1989) 1547-1571
13. Dorner D., Adachi Y., and Tsuzaki K. Periodic crystal lattice rotation in microband groups in a bcc metal. Scripta Materialia 57 (2007) 775-778
14. Dorner D., Zaefferer S., and Raabe D. Retention of the Goss orientation between microbands during cold rolling of a Fe-3%Si single crystal. Acta Materialia 55 (2007) 2519-2530
15. Duggan B.J., Hatherly M., Hutchinson W.B., and Wakefield P.T. Deformation structures and textures in cold-rolled 70:30 brass. Metals Science 12 (1978) 343-351
16. El-Danaf E., Kalidindi S.R., Doherty R.D., and Necker C. Deformation texture transition in brass: critical role of micro-scale shear bands. Acta Materialia 48 (2000) 2665-2673
17. Fargette B., and Whitwham D. Deformation plastique du laiton CuZn30 au cours de déformations élevées par laminage. Memoires Science Revue de Metallurgie 73 (1976) 197-206
18. Graff S., Brocks W., and Steglich D. Yielding of magnesium: from single crystal to polycrystalline aggregates. International Journal of Plasticity 23 (2007) 1957-1978
19. Grewen J., Noda T., and Sauer D.Z. Elektronenmikroskopische untersuchungen an scherbändern. Zeitschrift für Metalkunde 68 (1977) 260-265
20. Harami T., Hutchinson W.B., Dillamore I.L., and Bate P. Contribution of shear banding to origin of Goss texture in silicon iron. Metal Science 18 (1984) 57-65
21. Hill R. Acceleration waves in solids. Journal of the Mechanics and Physics of Solids 10 (1962) 1-29
22. Hirsch J. Correlation of deformation texture and microstucture. Material Science and Technology 6 (1990) 1048-1057
23. Hirsch J., and Lücke K. Mechanism of deformation and development of rolling texture in polycrystalline fcc metals. Acta Metallurgica 36 (1988) 2863-2882
24. Hirsch J., Lücke K., and Hatherly M. Mechanism of deformation and development of rolling textures in polycrystalline fcc metals-III. The influence of slip inhomogeneities and twinning. Acta Metallurgica 36 (1988) 2905-2927
25. Huot A., Schwarzer R.A., and Driver J.H. Texture of shear bands in Al-Mg3% (AA5182) measured by BKD. Materials Science Forum 273-275 (1998) 319-326
26. Inagaki H., Koizumi M., Chang C.S.T., and Duggan B.J. Orientation imaging microscopy of the shear bands formed in Al-5%Mg alloys during cold rolling. Materials Science Forum 396-4 (2002) 587-592
27. Kalidindi S.R. Modelling the strain hardening response of low SFE fcc alloys. International Journal of Plasticity 14 (1998) 1265-1277
28. Kamijo T., and Sekine K. On the mechanism of texture transition in fcc metals. Metallurgical Transactions A 1 (1970) 1287-1292
29. Kocks U.F., Tome C.N., and Wenk H.R. Texture and Anisotropy: Preferred Orientations and their Effect on Materials Properties (1998), Cambridge University Press, Cambridge
30. Korbel A., Embury J.D., Hatherly M., and Martin P. Microstructual aspect of strain localization in Al-Mg alloys. Acta Metallurgica 34 (1986) 1999-2009
31. Korbel A., and Martin P. Microscopic versus macroscopic aspect of shear bands deformation. Acta Metalialia 34 (1986) 1905-1909
32. Köhlhoff G.D., Malin A.S., Lücke K., and Hatherly M. Microstructure and texture of rolled {1 1 2}〈1 1 1〉 copper single crystals. Acta Metallurgica 36 (1988) 2841-2847
33. Kuroda M., and Tvergaard V. A phenomenological plasticity model with non-normality effects representing observations in crystal plasticity. Journal of Mechanics and Physics of Solids 49 (2001) 1239-1263
34. Kuroda M., and Tvergaard V. Effects of texture on shear band formation in plane strain tension/compression and bending. International Journal of Plasticity 23 (2007) 244-272
35. Lee C.S., and Duggan B.J. Deformation banding and copper-type rolling texture. Acta Metallalurgica et Materialia 41 (1993) 2691-2699
36. Lee C.S., and Duggan B.J. Modified theory of rolling texture development in α brass. Materials Science and Technology 10 (1994) 155-161
37. Leffers T., and Bilde-Sorensen J.B. Intra- and intergranular heterogenites in the plastic deformation of brass during rolling. Acta Metallurgica et Materialia 38 (1990) 1917-1926
38. Leffers T., and Van Houtte P. Calculated and experimental orientation distribution of twin lamellae in rolled brass. Acta Metallurgica 37 (1989) 1191-1198
39. Lou X.Y., Li M., Boger R.K., Agnew S.R., and Wagoner R.H. Hardening evolution of AZ31B Mg sheet. International Journal of Plasticity 23 (2007) 44-86
40. Mahesh S., and Tome C.N. Deformation banding model under arbitrary monotomic loading in cube metals. Philosophical Magazine 84 (2004) 3517-3546
41. Malin A.S., and Hatherly M. Microstructure of cold-rolled copper. Metals Science 13 (1979) 463-472
42. Morawiec A. Automatic orientation determination from Kikuchi patterns. Journal of Applied Crystallography 32 (1999) 788-798
43. Morawiec A., Fundenberger J.J., Bouzy E., and Lecomte J.S. EP - a program for deformation of crystallite orientations from TEM Kikuchi and CBED diffraction patterns. Journal of Applied Crystallography 35 (2002) 287
44. Morii K., and Nakayama Y. Shear bands in rolled copper single crystals. Transactions of the Japan Institute 22 (1981) 857-864
45. Morii K., Mecking H., and Nakayama Y. Development of shear bands in fcc single crystals. Acta Metallurgica 33 (1985) 379-386
46. Nakayama Y., and Morii K. Transmission electron microscopy of shear band formation in rolled copper single crystals. Transactions of the Japan Institute 23 (1982) 422-431
47. Ortiz M., and Repetto E.A. A continuum model of kinetic roughening and coarsening in thin films. Journal of Mechanics and Physics of Solids 47 (1999) 630-697
48. Paul H., Driver J.H., and Jasieński Z. Shear banding and recrystallization nucleation in a Cu-2%Al alloy single crystal. Acta Materialia 50 (2002) 815-830
49. Paul H., Driver J.H., Maurice C., and Jasieński Z. Crystallographic aspects of the early stages of recrystallization in brass-type shear bands. Acta Materialia 50 (2002) 4339-4355
50. Paul H., Driver J.H., Maurice C., and Jasieński Z. Shear band microtexture formation in twinned face centred cubic single crystals. Materials Science and Engineering A359 (2003) 178-191
51. Paul H., Driver J.H., Maurice C., and Pia{ogonek}tkowski A. The role of shear banding on deformation texture in low stacking fault energy metals as characterized on model silver single crystals. Acta Materialia 55 (2007) 575-588
52. Paul H., Morawiec A., Bouzy E., Funderberger J.J., and Pia{ogonek}tkowski A. Brass-type shear bands and their influence on texture formation. Metallurgical and Materials Transaction A 35 (2004) 3775-3786
53. Rudnicki R.W., and Rice J.R. Conditions for localization of deformation in pressure-sensitive dilatant materials. Journal of Mechanics and Physics of Solids 23 (1975) 371-394
54. Shiekhelsouk M.N., Favier V., Inal K., and Cherkaoui M. Modelling the behaviour of polycrystalline austenitic steel with twinning-induced plasticity effect. International Journal of Plasticity 25 (2009) 105-133
55. Van Houtte P., Li S., Seefeldt M., and Delannay L. Deformation texture prediction: from the Taylor model to the advanced Lamel model. International Journal of Plasticity 21 (2005) 589-624
56. Van Houtte P., Sevillano J.G., and Aernoudt E. Models for shear band formation in rolling and extrusion. Zeitschrift für Metallkunde 70 (1979) 426-432
57. Wagner P., Engler O., and Lücke K. Formation of Cu-type shear bands and their influence on deformation and texture of rolled fcc {1 1 2}(1 1 1) single crystals. Acta Metallurgica et Materialia 43 (1995) 3799-3812
58. Wassermann G.Z. Der Einfluβ Mechanischer Zwillingsbildung auf die Entstehung der Walztexturen kubisch flächenzentrierter Metalle. Zeitschrift für Metallkunde 54 (1963) 61-65
59. Weidner A., and Klimanek P. Shear banding and texture development in cold-rolled α-brass. Scripta Materialia 38 (1998) 851-856
60. Yeung W.Y., and Duggan B.J. Flow localization in cold-rolled α-brass. Materials Science and Technology 2 (1986) 552-558