Adaptive actuator fault compensation for linear systems with matching and unmatching uncertainties

Journal of Process Control

Volumn 19, Issue 6, 2009, Pages 985-990

  Zhang, Yingwei ^a   Qin, S Joe ^b  

^a KEY LABORATORY OF INTEGRATED AUTOMATION OF PROCESS INDUSTRY   (China)

^b University of Southern California ^*  (United States)

Author keywords

Fault compensation; Fault detection; Fault tolerant control; Stability

Indexed keywords

ACTIVE FAULTS; ACTUATOR FAULTS; ADAPTIVE ACTUATORS; ADAPTIVE FEEDBACKS; CLOSED-LOOP STABILITIES; CLOSED-LOOP SYSTEMS; COMPENSATION CONTROLLERS; CONTROL LAWS; DESIGN METHODS; FAULT COMPENSATION; FAULT DYNAMICS; FAULT-TOLERANT CONTROL; NETWORK REPRESENTATIONS; NON-LINEAR FUNCTIONS; OUTPUT FEEDBACK CONTROLLERS; PROCESS SYSTEMS; TANK SYSTEMS;

ACTUATORS; CONTROLLERS; DYNAMICS; FAULT DETECTION; FEEDBACK; FEEDBACK CONTROL; LINEAR SYSTEMS; NEURAL NETWORKS; NONLINEAR CONTROL SYSTEMS; SYSTEM STABILITY;

ADAPTIVE CONTROL SYSTEMS;

EID: 67349105650     PISSN: 09591524     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jprocont.2008.12.008     Document Type: Article

References (44)

1. Zhang X., Parisini T., and Polycarpou M.M. Adaptive fault-tolerant control of nonlinear uncertain systems: an information-based diagnostic approach. IEEE Trans. Autom. Control 49 (2004) 1259-1274
2. F. Allgöwer, F.J. Doyle, Nonlinear process control-which way to the promised land? in: Proceedings of 5th International Conference on Chemical Process Control, Tahoe City, CA, 1997, pp. 24-45.
3. Patwardhan S.C., Manuja S., Narasimhan S., and Shah S.L. From data to diagnosis and control using generalized orthonormal basis filters, Part II: Model predictive and fault tolerant control. Journal of Process Control 16 (2006) 157-175
4. ∞ control and RFD for LTI systems, in: Proceedings of the IFAC World Congress, 2002, pp. 494-499.
5. Mhaskar P., McFall C., Gani A., Christofides D.P., and Davis F.J. Isolation and handling of actuator faults in nonlinear systems. Automatica 44 (2008) 53-62
6. Lee J., Qin S.J., and Lee I. Fault detection and diagnosis based on modified independent component analysis. AIChE J. 52 (2006) 3501-3514
7. Venkatasubramanian V., Rengaswamy R., Yin K., and Kavuri S.N. Review of process fault diagnosis - Part I: Quantitative model-based methods. Comput. Chem. Eng. 27 (2003) 293-311
8. Tortora G., Kouvaritakis B., and Clarke D.W. Simultaneous optimization of tracking performance and accommodation of sensor faults. Int. J. Control 75 (2002) 163-176
9. M. Idan, M. Johnson, J.A. Calise, J. Kaneshge, Intelligent aerodynamic/propulsion flight control for flight safety: a nonlinear adaptive approach, in: Proceedings of the American Control Conference, 2001, pp. 2918-2923.
10. Wu N., Zhang Y., and Zhou K. Detection, estimation and accommodation of loss of control effectiveness. Int. J. Adapt. Control Signal Process. 14 (2000) 775-795
11. Veillette R.J., Medanic J.V., and Perkins W.R. Design of reliable control systems. IEEE Trans. Automat. Control 37 (1992) 290-300
12. Y. Zhang, Study on the adaptive control and Reliable control for composite systems (Doctoral Thesis), Northeastern University, PR China, 2002.
13. Vidyasagar M., and Viswanadham N. Reliable stabilization using a multicontroller configuration. Automatica 21 (1985) 599-602
14. Tan L., Siljak D.D., and Ikeda M. Reliable stabilization via factorization methods. IEEE Trans. Automat. Control 37 (1991) 1786-1791
15. A.N. Gundes, M.G. Kabuli, Reliable decentralized control, in: Proceedings of the American Control Conference, Baltimore, MD, 1992, pp. 3359-3363.
16. Veillette R.J., Medanic J.V., and Perkings W.R. Design of reliable control systems. IEEE Trans. Automat. Control 37 (1992) 290-304
17. 2-gain analysis of nonlinear systems and nonlinear control. IEEE Trans. Automat. Control 34 (1992) 770-784
18. DSiljak D. Reliable control using multiple control systems. Int. J. Control 31 (1980) 303-329
19. J.V. Medanic, Design of fault-tolerance controllers using redundant control elements, in: Proceedings of the American Control Conference, 1993, pp. 3130-3134.
20. Veillette R.J. Reliable linear-quadratic state feedback control. Automatica 31 (1995) 137-143
21. Y. Zhang, J. Jiang, Bibliographic review on reconfigurable fault-tolerant control systems, in: Proceedings of the IFAC Safeprocess, 2003, pp. 265-276.
22. Bodson M., and Groszkiewicz J.E. Multivariable adaptive control algorithms for reconfigurable flight control. IEEE Trans. Control Syst. Technol. 5 (1997) 217-229
23. Diao Y., and Passino K.M. Stable fault tolerant adaptive fuzzy/neural control for a turbine engine. IEEE Trans. Control Syst. Technol. 9 (2001) 494-509
24. Jiang J. Design of reconfigurable control systems using eigenstructure assignment. Int. J. Control 59 (1994) 395-410
25. J.D. Boskovic, R.K. Mehra, Stable multiple model adaptive flight control for accommodation of a large class of control effector failures, in: Proceedings of the American Control Conference, 1999, pp. 1920-1924.
26. Zhang Y., and Jiang J. Integrated active fault-tolerant control using IMM approach. IEEE Trans. Aerosp. Electron. Syst. 37 (2001) 1221-1235
27. Staroswieckia M., Yang H., and Jiang B. Progressive accommodation of parametric faults in linear quadratic control. Automatica 43 (2007) 2070-2076
28. Jiang B., and Chowdhury F.N. Fault estimation and accommodation for linear MIMO discrete-time systems. IEEE Trans. Control Syst. Technol. 13 (2006) 493-499
29. M. Blanke, M. Staroswiecki, N.E. Wu, Concepts and methods in fault-tolerant control, in: Proceedings of the American Control Conference, 2001, pp. 2606-2620.
30. J.R. Patton, Fault-tolerant control: the 1997 situation, in: Proceedings of the IFAC Symposium on Fault Detection, Supervision Safety for Process., 1997, pp. 1033-1055.
31. D.J. Boskovic, H.S. Yu, K.R. Mehra, A stable scheme for automatic control reconfiguration in the presence of actuator failures, in Proceedings of the American Control Conference, 1998, pp. 2455-2459.
32. Wu N.E. Coverage in fault-tolerant control. Automatica 40 (2004) 537-548
33. Zhang Y., Wang F., and Yu G. Fault accommodation of a class of nonlinear systems using a learning approach. ACTA Automatica Sinica 30 (2004) 757-762
34. Mhaskar P., Gani A., El-Farra N.H., McFall C., Christofides P.D., and Davis J.F. Integrated fault-detection and fault-tolerant control of process systems. AIChE J. 52 (2006) 2129-2148
35. Gandhi R., and Mhaskar P. Safe-parking of nonlinear process systems. Computer and Chemical Engineering 32 (2008) 2113-2122
36. Wang Y., Zhou D., and Gao F. Robust fault-tolerant control of a class of non-minimum phase nonlinear processes. J. Process Control 17 (2007) 523-537
37. Yan X., and Edwards C. Nonlinear robust fault reconstruction and estimation using a sliding mode observer. Automatica 43 (2007) 1605-1614
38. Mhaskar P. Robust model predictive control design for fault-tolerant control of process systems. Ind. Eng. Chem. Res. 45 (2006) 8565-8574
39. Mhaskar P., Gani A., McFall C., Christofides D.P., and Davis J.F. Fault-tolerant control of nonlinear process systems subject to sensor faults. AIChE J. 53 (2007) 654-668
40. R. Selmic, M. Polycarpou, T. Parisini, Actuator fault detection in nonlinear uncertain systems using neural on-line approximation model, in: Proceedings of the 2006 American Control Conference, Minneapolis, Minnesota, USA, June 14-16, 2006, pp. 5123-5128.
41. Kosmatopoulos E., Polycarpou M., Christodoulou M., and Ioannou P. High-order neural network structures for identification of dynamical systems. IEEE Trans. Neural Networks 6 (1995) 422-431
42. Polycarpou M., and Helmicki J. Automated fault detection and accommodation: a learning systems approach. IEEE Transactions on Systems, Man, and Cybernetics 25 (1995) 1447-1458
43. S.J. Qin, Y. Zhang, Actuator fault compensation control of nonlinear systems, in: Proceedings of the IFAC World Congress, 2008, pp. 11160-11165.
44. Zhang Y., and Qin S.J. Adaptive actuator/component fault compensation for nonlinear system. AIChE J. 54 (2008) 2404-2412