Effect of the filler and the compatibilizer on the properties of filled blends

Composite Interfaces

Volumn 16, Issue 2-3, 2009, Pages 85-95

  Siročić, Anita Ptiček ^a   Hrnjak Murgić, Zlata ^a   Jelenčić, Jasenka ^a  

^a UNIVERSITY OF ZAGREB   (Croatia)

Author keywords

Blends; Dispersion; Filler; Mechanical properties; Polymer composite

Indexed keywords

ALUMINUM HYDROXIDE; BLENDS; ETHYLENE PROPYLENE COPOLYMERS; ETHYLENE-VINYL ACETATE COPOLYMERS; EXTRUSION PROCESS; MATRIX; MECHANICAL FEATURE; MICRO-STRUCTURAL; MORPHOLOGICAL CHANGES; POLYMER COMPOSITE; SCANNING ELECTRONIC MICROSCOPY; SEM; TENSILE TESTS; TWO STAGE;

ALUMINA; ALUMINUM; COMPATIBILIZERS; COMPOSITE MATERIALS; COPOLYMERIZATION; ETHYLENE; FILLERS; HIGH ENERGY FORMING; MECHANICAL PROPERTIES; POLYMERS; POLYVINYL ACETATES; PROPYLENE; TENSILE STRENGTH; TENSILE TESTING; THERMOPLASTICS; X RAY DIFFRACTION;

POLYMER BLENDS;

EID: 67149107072     PISSN: 09276440     EISSN: 15685543     Source Type: Journal    
DOI: 10.1163/156855409X402876     Document Type: Article

References (26)

1. I. A. Hussein, K. Ho, S. K. Goyal, E. Karbashewski and M. C. Williams, Thermomechanical degradation in the preparation of polyethylene blends, Polym. Degrad. Stabil. 68, 381-392 (2000).
2. F. P. La Mantia and J. L. Gardette, Improvement of the mechanical properties of photo-oxidized films after recycling, Polym. Degrad. Stabil. 75, 1-7 (2002). (Pubitemid 33142191)
3. A. Choudhury, M. Mukherjee and B. Adhikari, Thermal stability and degradation of the post-use reclaim milk pouches during multiple extrusion cycles, Thermochim. Acta 430, 87-94 (2005). (Pubitemid 40574487)
4. J. W. Barlow and D. R. Paul, Mechanical compatibilization of immiscible blends, Polym. Engng. Sci. 24, 525-534 (1984). (Pubitemid 15428110)
5. 2 particles, Polymer 45, 1913-1922 (2004). (Pubitemid 38224323)
6. J. W. Teh, Structure and properties of polyethylene-polypropylene blend, J. Appl. Polym. Sci. 28, 605-618 (1983). (Pubitemid 13486846)
7. L. Cui and D. R. Paul, Evaluation of amine functionalized polypropylenes as compatibilizers for polypropylene nanocomposites, Polymer 48, 1632-1640 (2007). (Pubitemid 46320478)
8. W. S. Stoy and F. J. Washabaugh, in: Encyclopedia of Polymer Science and Engineering, H. F. Mark, N. M. Bikales, C. G. Overberger and G. Menges (Eds), Vol. 7, pp. 53-73. Wiley, New York, USA (1986).
9. A. Dhoble, B. Kulshreshtha, S. Ramaswami and D. A. Zumbrunnen, Mechanical properties of PP-LDPE blends with novel morphologies produced with a continuous chaotic advection blender, Polymer 46, 2244-2256 (2005). (Pubitemid 40311695)
10. S. C. Jana and S. Jain, Dispersion of nanofillers in high performance polymers using reactive solvents as processing aids, Polymer 42, 6897-6905 (2001). (Pubitemid 32441159)
11. M. Y. Boluk and H. P. Schreiber, Interfacial interactions and the properties of filled polymers: I. Dynamic-mechanical responses, Polym. Compos. 7, 295-301 (1986). (Pubitemid 17464596)
12. R. Uotila, U. Hippi, S. Paavola and J. Seppälä, Compatibilization of PP/elastomer/microsilica composites with functionalized polyolefins: effect on microstructure and mechanical properties, Polymer 46, 7923-7930 (2005). (Pubitemid 41203013)
13. A. Galeski, Strength and toughness of crystalline polymer systems, Prog. Polym. Sci. 28, 1643-1699 (2003).
14. 2 nanocomposites, Polymer 47, 1267-1280 (2006). (Pubitemid 43199735)
15. S. Jose, A. S. Aprem, B. Francis, M. C. Chandy, P. Werner, V. Alstaedt and S. Thomas, Phase morphology, crystallisation behaviour and mechanical properties of isotactic polypropylene/high density polyethylene blends, Eur. Polym. J. 40, 2105-2115 (2004).
16. Q. Fu and G. Wang, Polyethylene toughened by rigid inorganic particles, Polym. Engng. Sci. 32, 94-97 (1992).
17. Y. Long and R. A. Shanks, PP-elastomer-filler hybrids. I. Processing, microstructure, and mechanical properties, J. Appl. Polym. Sci. 61, 1877-1885 (1996). (Pubitemid 126574505)
18. R. Séguéla, Plasticity of semi-crystalline polymers: crystal slip versus melting-recrystallization, e-Polymers 032, 1-20 (2007). (Pubitemid 46437177)
19. S. Bertin and J. Robin, Study and characterization of virgin and recycled LDPE/PP blends, Eur. Polym. J. 38, 2255-2264 (2002). (Pubitemid 34946873)
20. R. A. Phillips and M. D. Wolkowicz, in: Polypropylene Handbook, E. P. Moore (Ed.), pp. 134-156. Hanser Gardner Publications, Munich, Germany (1996).
21. J. H. Chen, F. C. Tsai, Y. H. Nien and P. H. Yeh, Isothermal crystallization of isotactic polypropylene blended with low molecular weight atactic polypropylene. Part I. Thermal properties and morphology development, Polymer 46, 5680-5688 (2005). (Pubitemid 40831711)
22. J. H. Chen and Y. L. Chang, Isothermal crystallization kinetics and morphology development of isotactic polypropylene blends with atactic polypropylene, J. Appl. Polym. Sci. 103, 1093-1104 (2007). (Pubitemid 46051257)
23. 3 during wet dispersion in stirred ball mills, Part. Part. Syst. Charact. 21, 31-38 (2004).
24. A. Turner-Jones and A. J. Cobbold, The β-crystalline form of isotactic polypropylene, J. Polym. Sci., Part B: Polym. Phys. 6, 539-546 (1968).
25. D. W. Fox and R. B. Allen, in: Encyclopedia of Polymer Science and Engineering, H. F. Mark, N. M. Bikales, C. G. Overberger and G. Menges (Eds), Vol. 3, pp. 758-775. Wiley, New York, USA (1985).
26. B. Pukanszky, in: Composite, J. Karger-Kocsis (Ed.), Vol. 3, pp. 1-25. Chapman and Hall, London, UK (1995).