Experimental studies on turning of discontinuously reinforced aluminium composites under dry, oil water emulsion and steam lubricated conditions using TAGUCHI's technique

Gazi University Journal of Science

Volumn 22, Issue 1, 2009, Pages 21-32

  Shetty, Raviraj ^a   Pai, R ^a   Rao, S S ^b  

^a MANIPAL INSTITUTE OF TECHNOLOGY   (India)

^b NATIONAL INSTITUTE OF TECHNOLOGY KARNATAKA   (India)

Author keywords

ANOVA; Cutting force; Cutting temperature; Design of experiments; DRACs; Hystrix cristata

Indexed keywords

ANALYSIS OF VARIANCE (ANOVA); CUTTING; EMULSIFICATION; EMULSIONS; LUBRICATION; TURNING;

'DRY' [; ANALYSE OF VARIANCE; CONDITION; CUTTING FORCES; CUTTING PARAMETERS; CUTTING TEMPERATURE; DRAC; HYSTRIX CRISTATA; OIL/WATER EMULSION; WATER STEAM;

DESIGN OF EXPERIMENTS;

EID: 66549112673     PISSN: 13039709     EISSN: 21471762     Source Type: Journal    
DOI: None     Document Type: Article

References (44)

1. Evans, A., Marchi, C.S., Mortenson, A., "Journal of Metal Matrix Composites in Industry an Introduction and a Survey", Kluwer, Boston, (2003).
2. Ramrattan, S., Sitkins, F., Nallakatala, M., "Optimization of the Casting and Machining Processes for Metal Matrix Composites", Proceedings of the Canadian Society for Mechanical Engineers Symposium, McMaster University, (1996).
3. Monaghan, J.M., "The Use of Quick Stop Test to Study the Chip Formation of a SiC/Al Metal Matrix Composite and its Matrix Alloy", Journal of Processing of Advanced Materials, 4: 170- 179 (1994).
4. Cakir, O., Kiyak, M., Altan, E., "Comparisons of gases applications to wet and dry cuttings in turning", Journal of Material Processing Technology, 153-154: 35-41 (2004).
5. Hollis, W.S., "The applications and effect of controlled atmospheres in machining of metals", Int. J. Machine Tool Design Res., 1:59-78 (1961).
6. Johansson, U., Lindstom, B., "Tool wear by chatter caused by oxygen pumping", Annals of the CIRP, 19: 317-321 (1971).
7. Williams, J.A., Tabor, D., "The role of lubricants in machining", Wear, 43:275-292 (1977).
8. Williams, J.A., "The action of lubricants in metal machining", Journal of Mechanical Engineering Science, 19:.202-212 (1977).
9. Altan, E., Kiyak, M., Cakir, O., "The effect of oxygen gas application into cutting zone on machining", Proceedings of Sixth Biennial Conference on Engineering system Design and Analysis (ESDA2002), Istanbul, 1-5 (2002)
10. Rowe, G.W., Smart, E.F., "The importance of oxygen in dry cutting machining of metal on lathe", Br. Journal of Applied Physics, 14: 924-926 (1963).
11. Podgorkov, V.V., et al., Patent of USSR #1549721 MCI B23Q, Method of cutting in application, (in Russia), (1992).
12. Godlevski, V.A., et al., "Water steam lubrication during machining", Tribologia, 162 (6):11 (1998).
13. Liu, J.Y., Han, R.D., Sun, Y.F., "Research on experiments and action mechanism with water vapor as coolant and lubricant in green cutting", International Journal of Machine Tools Manufacture, 45:687-694 (2005).
14. Shetty, R., Pai, R.B., Kamath, V., Rao, S.S., "Study of Surface roughness minimization in turning of DRACs using surface roughness methodology and Taguchi under pressured steam jet approach", ARPN Journal of Engineering and Applied Sciences, 3(1):59-67 (2008).
15. Shetty, R., Pai, R.B., Rao, S.S., "Tribological studies on discontinuously reinforced aluminium composites based on the orthogonal arrays", ARPN Journal of Engineering and Applied Sciences, 3(1): 94-92 (2008).
16. Anjaiah, D., Shetty, R., Pai, R.B., Kini, M.V., Rao, S.S., "A pressured steam jet approach to tool wear minimization in cutting of metal matrix composites", Materials Science Forum, 561-565: 643-646 (2007).
17. Li, X.P., Seah, W.K.H., "Tool wear acceleration in relation to work piece reinforcement percentage in cutting metal matrix composites", Wear, 247:161-171 (2001).
18. Li, X.P., "Study of the jet-flow rate of cooling in machining", Part 1.Theoretical analysis, Material Processing Technology, 62:149-156 (1996).
19. Li, X.P., "Study of the jet-flow rate of cooling in machining" Part 2.Simulation study, Material Processing Technology, 62:157-165 (1996).
20. Kaminski, J., Alvelid, B., "Temperature reduction in the cutting zone in water-jet assisted turning", Material Processing Technology, 106:.68-73 (2000).
21. Hung, N.P., Yeo, H.B.E., "On Effect of cutting fluid on the Machinability of metal matrix composites", Journal of Materials Processing Technology, 67:157 -161 (1997).
22. Weinert, K., "A consideration of tool wear mechanism when machining metal matrix composites (MMC)", Ann. CIRP, 42: 95-98 (1993).
23. Wang, Z.Y., Rajurkar, K.P., "Optimal Wear of CBN tool in turning of silicon nitride with cryogenic cooling", Machine Tools and Manufacturing, 37(3): 319-326 (1997).
24. Mazurkiewicz, M., Kubala, Z., Chow, J., "Metal machining with high pressure water-jet cooling assistance - a new possibility", Engineering Industries, 111: 7-12 (1989).
25. Shetty, R., Pai, R.B., Rao, S.S., Shenoy, B.S., "Study of tool wear in turning 15% SiCp reinforced 6061 aluminium metal matrix composite with steam as coolant", Proceedings of International conference on Advanced Material processing and characterization, (APMC 2006), Chennai, India,(2006).
26. Shetty, R., Pai, R.B., Rao, S.S., Barboza, A.B.V., "Tribological studies on PCBN tool in turning metal matrix composites with Steam as coolant", Proceedings of International Tribological conference (AUSTRIB 2006), Brisbane, Australia (2006).
27. Shetty, R., Pai, R.B., Rao, S.S., "Kumar D.,Chip and built-up edge formation in turning age hardened AA6061/15 vol. % SiCp composites with steam as coolant", Proceedings of Second International conference on recent advances in composite materials, (ICRAM 2007), New Delhi, India (2007).
28. Shetty, R., Pai, R.B., Rao, S.S., Nayak Rajesh., "Tribological studies of steam penetration in different directions in turning of metal matrix composites using steam as coolant", Proceedings of International conference on Industrial tribology, (ICIT-2006) held at Bangalore, India (2006).
29. Shetty, R., Pai, R.B., Rao, S.S., Vasudev, M., "Influence of lubrication condition on surface roughness in turning of metal matrix composites"; Proceedings of Sixth International Conference on composite science and technology, (ICCST/6) Durban, South Africa (2007).
30. Sales, W.F., Guimara, G., Machado, A.R., Ezugwu E.O., "Cooling ability of cutting fluids and measurement of the chip-tool interface temperatures", Industrial Lubrication and Tribology, 54(2): 57-68 (2002).
31. Singh, H., Kumar, P., "Tool wear optimization in turning operation by Taguchi method", Indian Journal of Engineering Material Science, 11: 19-24 (2004).
32. Singh, H., Kumar, P., "Optimizing cutting force for turned parts using Taguchi's parameter design approach", Indian Journal of Engineering Material Science, 12: 97-103 (2005).
33. Paulo Davim, J., "A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments", Journal of Material Processing Technology, 116: 305-308 (2001).
34. O'Sullivan, D., Cotterell, M., "Temperature measurement in single point turning", Journal of Materials Processing Technology, 118 (1-3): 301-308 (2001).
35. Dewes, R.C., Ng, E., Chua, K.S., "Newton P.G., Aspinwall, D.K, Temperature measurement when high speed machining hardened mould/die steel", Journal of Materials Processing Technology, 92-93: 93-301 (1999).
36. Ross, P.J., "Taguchi techniques for quality engineering: Loss function, orthogonal experiments, parameter and tolerance design", 2nd ed., New York, NY: McGraw-Hill, (1996).
37. Phadke, M.S., "Quality engineering using robust design", Englewood Cliffs, NJ: Prentice-Hall, (1989).
38. Yang, W.H., Tarng, Y.S., "Design optimization of cutting parameters for turning operations based on the Taguchi method", Journal of Material Processing Technology, 84: 122-129 (1998).
39. Su, Y.L., Yao, S.H., Wei, C.S., Kao, W.H., Wu, C.T., "Design and performance analysis of TiCN-coated cemented carbide milling cutters", Journal of Material Processing Technology, 87: 82-89 (1999).
40. Nian, C.Y., Yang, W.H., Tarng, Y.S,, "Optimization of turning operations with multiple performance characteristics", Journal of Material Processing Technology, 95:.90-96 (1999).
41. Lin, T.R., "Experimental design and performance analysis of TiNcoated carbide tool in face milling stainless steel", Journal of Material Processing Technology, 127:.1-7 (2002).
42. Davim, J.P., "Design optimization of cutting parameters for turning metal matrix composites based on the orthogonal arrays", Journal of Material Processing Technology, 132: 340-344 (2003).
43. Ghani, J.A., Choudhury, I.A, Hassan, H.H., "Application of Taguchi method in the optimization of end milling operations", Journal of Material Processing Technology, 145: 84-92 (2004).
44. Varadarajan, A.S., Philip, P.K., "Ramamoorthy B., Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning", International Journal of Machine Tools & Manufacture, 42: 193-200 (2002).