Thermomechanical processing of pipeline steels with a reduced Mn content

ISIJ International

Volumn 49, Issue 2, 2009, Pages 284-292

  Schambron, Thomas ^a,b   Phillips, Andrew W ^b,c   O'brien, David M ^b   Burg, Joshua ^b   Pereloma, Elena V ^a   Killmore, Chris C ^b   Williams, Jim A ^b  

^a UNIVERSITY OF WOLLONGONG   (Australia)

^b BlueScope Steel   (Australia)

^c MONASH UNIVERSITY   (Australia)

Author keywords

High strength low alloy; Hot rolling; Manganese; Non recrystallization temperature; Pipeline steel; Thermo mechanical control process

Indexed keywords

ALLOY DESIGNS; COMMERCIAL STEEL; COOLING RATES; COOLING TEMPERATURE; DEGREE OF DEFORMATIONS; FERRITE GRAINS; FINE GRAINS; GLEEBLE; HIGH DENSITY; HIGH STRENGTH LOW ALLOY; HOT-ROLLED; MN CONTENT; MNS INCLUSIONS; NON-RECRYSTALLIZATION TEMPERATURE; NUCLEATION RATE; NUCLEATION SITES; PIPELINE STEEL; PRODUCT PROPERTY; RECRYSTALLIZATION; STEELMAKING PROCESS; TESTING MACHINE; THERMO-MECHANICAL CONTROL PROCESS; THERMO-MECHANICAL PROCESSING;

ALLOYS; AUSTENITE; COOLING; DESULFURIZATION; FERRITE; HOT ROLLING; HOT ROLLING MILLS; MANGANESE; MANGANESE COMPOUNDS; METAL WORKING; NUCLEATION; PIPELINE PROCESSING SYSTEMS; PIPELINES; PLASTIC FLOW; RECRYSTALLIZATION (METALLURGY); STEEL; STEEL PIPE; STEELMAKING; STRENGTH OF MATERIALS; THERMOMECHANICAL TREATMENT; WEAR RESISTANCE;

PROCESS CONTROL;

EID: 66249090849     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.49.284     Document Type: Article

References (50)

1. I. Simpson, Z. Tritsiniotis and L. Moore: Ironmaking Steelmaking, 30 (2003), 158.
2. J. Williams, C. Killmore, F. Barbara, A. Meta and L. Fletcher: Int. Conf. Microalloying 95, Iron and Steel Society, Pittsburgh, USA, (1996).
3. R. Kiesling and N. Lange: Non-Metall ic Inclusions in Steel, The Institute of Materials, London, (1997), 97.
4. N. Tsunekage and H. Tsubakino: ISIJ Int., 41 (2001), 498.
5. T. Banks and T. Gladman: Met. Technol., 6 (1979), 81.
6. I. Simpson: Met. Australas., 11 (1979), 20.
7. J. Williams: Advances in Steels for High Strength ERW Linepipe Application in Australia, Materials and Austceram. Sydney, (2007).
8. F. Vodopivec, M. Torkar and M. Jakupovic: Mater. Sci. Technol., 3 (1987), 372.
9. I. Tsukatani, M. Sudo and H. Takada: Tetsu-to-Hagané, 69 (1983), 967.
10. A. Takahashi and M. lino: ISIJ Int., 36 (1996), 235.
11. A. Takahashi and M. lino: ISIJ Int., 36 (1996), 241.
12. M. Akben, I. Weiss and J. Jonas: Acta Mater., 29 (1981), 111.
13. S. Cho, K. Kang and J. Jonas: Mater. Sci. Technol., 18 (2002), 389.
14. H. Zurob, G. Zhu, S. Subramanian, G. Purdy, C. Hutchinson and Y. Brechet: Mater. Sci. Forum, 500-501 (2005), 123.
15. T. Hara, H. Asahi, R. Uemori and H. Tamehiro: ISIJ Int., 44 (2004), 1431.
16. G. Melloy, P. Slimmon and P. Podgursky: Metall. Trans., 4 (1973), 2279.
17. H. Tamehiro, M. Murata, R. Habu and M. Nagumo: Trans. Iron Steel Inst. Jpn., 27 (1987), 120.
18. API 5L Specification for Line Pipe American Petroleum Institute Washington DC, (2006).
19. M. Loveday, G. Mahon, B. Roebuck, C. Sellars and M. van der Winden: Measuring Flow Stress in Hot Plane Strain Compression Tests, National Physical Laboratory, Teddingtion, Middlesex, UK, (2000), 66.
20. J. Beynon and C. Sellars: J. Test Eval., 13 (1985), 28.
21. M. Mirza and C. Sellars: Mater. Sci. Technol., 17 (2001), 1133.
22. S. Cho, K. Kang and J. Jonas: ISIJ Int., 41 (2001), 766.
23. L. Jiang, A. Humphreys and J. Jonas: ISIJ Int., 44 (2004), 381.
24. ASTM: El 12-96: Standard Test Methods for Determining Average Grain Size. American Society for Testing and Materials, Philadelphia, (2004).
25. E. Palmiere, C. Garcia and A. DeArdo: Metall. Mater. Trans. A, 27A (1996), 951.
26. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Cambridge University Press, Cambridge, (1997), 138.
27. F. Siciliano and J. Jonas: Metall. Mater. Trans. A, 31A (2000), 511.
28. H. Zurob, G. Zhu, S. Subramanian, G. Purdy, C. Hutchinson and Y. Brechet: ISIJ Int., 45 (2005), 713.
29. T. Saknma: Mater. Sci. Technol. A, 1A (1985). 351.
30. J. Jonas: ISIJ Int., 40 (2000), 731.
31. M. Gomez, S. Medina and P. Valles: ISIJ Int., 45 (2005), 1711.
32. X. Wang and X. He: ISIJ Int., 42 (2002), S38.
33. D. Bai, S. Yue, T. Maccagno and J. Jonas: ISIJ Int., 36 (1996). 1084
34. K. Irvine, F. Pickering and T. Gladman: J. Iron Steel Inst. 205 (1967), 161.
35. L. Cuddy: Thermomechanical Processing of Microalloyed Austenite, ed. by A. DeArdo, G. Ratz and P. Wray, The Metallurgical Society of AIME, Pittsburgh, (1981), 129.
36. H. Andrade, M. Akben and J. Jonas: Metall. Trans. A, 14A (1983), 1967.
37. E. Bain: Function of the Alloying Elements in Steel, American Society of Met al.s, Cleveland, (1939), 117.
38. K. Andrews: J. Iron Steel Inst, 203 (1965), 721.
39. C. Ouchi, T. Sampei and I. Kozasu: ISIJ Int., 22 (1982), 214.
40. H. Meuser, F. Grimpe, S. Meimeth, C. Heckmann and C. Trager: Mater. Sci. Forum, 500-501 (2005), 565.
41. H. Luo, P. Zhao, Y. Zhang and Z. Dang: Mater. Sci. Technol. 17 (2001), 843.
42. A. Nesterenko, L. Storozheva and O. Girina: Met. Sci. Heat Treat. 35 (1993), 262.
43. Z. Kedzierski, R. Kawalla, M. Packo, A. Skolyszewski, H. Kusiak and M. Pietrzyk: ISIJ Int., 36 (1996), 1199.
44. N. Nakata and M. Militzer: ISIJ Int., 45 (2005), 82.
45. P. Manohar and T. Chandra: ISIJ Int., 38 (1998), 766.
46. P. Manohar, T. Chandra and C. Killmore: ISIJ Int., 36 (1996), 1486.
47. J. H. Chen and C. Yan: Metall. Trans. A, 23A (1992), 2549.
48. A. Echeverria and J. M. Rodriguez-Ibabe: Mater. Sci. Eng., A346 (2003), 149.
49. Q. Yu, Z. Wang, X. Liu and G. Wang: ISIJ Int., 44 (2004), 710.
50. Y. Kim, S. Kim, Y Lim and N. Kim: ISIJ Int., 42 (2002), 1571.