An interactively coupled CFD-Multi-zone approach to model HCCI combustion

Flow, Turbulence and Combustion

Volumn 82, Issue 4, 2009, Pages 621-641

  Felsch, C ^a   Dahms, R ^a   Glodde, B ^a   Vogel, S ^a   Jerzembeck, S ^a   Peters, N ^a   Barths, H ^b   Sloane, T ^b   Wermuth, N ^b   Lippert, A M ^b  

^a RWTH AACHEN UNIVERSITY   (Germany)

^b GENERAL MOTORS CORPORATION   (United States)

Author keywords

CFD; HCCI combustion; Interactive coupling; Multi zone model

Indexed keywords

CFD; CHEMICAL SPECIES; DETAILED CHEMICAL KINETIC; ELEMENTARY REACTION; EXPERIMENTAL DATA; HCCI COMBUSTION; HCCI ENGINE; INDUSTRIAL ENVIRONMENTS; INTERACTIVE COUPLING; LIQUID VOLUME FRACTION; MULTI-ZONE MODEL; MULTI-ZONE MODELS; N-HEPTANE; POLLUTANT FORMATION; REACTION MECHANISM; SIMULATION RESULT; SURROGATE FUELS; TEST CASE;

COMBUSTION; COMPUTATIONAL FLUID DYNAMICS; GASOLINE; LIQUIDS; PARAFFINS; SMOKE; THERMOCHEMISTRY; TITRATION;

SIMULATORS;

EID: 65749113752     PISSN: 13866184     EISSN: 15731987     Source Type: Journal    
DOI: 10.1007/s10494-009-9202-6     Document Type: Article

References (48)

1. Najt, P.M., Foster, D.E.: Compression-ignited homogeneous charge combustion. Paper No. SAE 830264 (1983)
2. Thring, R.H.: Homogeneous charge compression ignition (HCCI) engines. Paper No. SAE 892068 (1989)
3. Christensen, M., Johansson, B., Einewall, P.: Homogeneous charge compression ignition (HCCI) using isooctane, ethanol and natural gas-a comparison with spark ignition operation. Paper No. SAE 972874 (1997)
4. Urushihara, T., Hiraya, K., Kakuhou, A., Itoh, T.: Expansion of HCCI operating region by the combination of direct fuel injection, negative valve overlap, and internal fuel reformation. Paper No. SAE 2003-01-0749 (2003)
5. Koopmans, L., Ogink, R., Denbratt, I.: Direct gasoline injection in the negative valve overlap of a homogeneous charge compression ignition engine. Paper No. SAE 2003-01-1854 (2003)
6. Mori, S., Lang, O., Salber, W., Pischinger, S., Bücker, C.: Type analysis of EGR-strategies for controlled auto ignition (CAI) by using numerical simulations and optical measurements. Paper No. SAE 2006-01-0630 (2006)
7. Guohong, T., Zhi, W., Jian-Xin, W., Shi-Jin, S., Xinliang, A.: HCCI combustion control by injection strategy with negative valve overlap in a GDI engine. Paper No. SAE 2006-01-0415 (2006)
8. Rakopoulos, C.D., Hountalas, D.T.: Development and validation of a 3-D multi-zone combustion model for the prediction of DI Diesel engines performance and pollutants emissions. Paper No. SAE 981021 (1998)
9. Easley, E., Agarwal, A., Lavoie, G.A.: Modeling of HCCI combustion and emissions using detailed chemistry. Paper No. SAE 2001-01-1029 (2001)
10. Flowers, D., Aceves, S.M., Martinez-Frias, J., Hessel, R.P., Dibble, R.: Effects of mixing on hydrocarbon and carbon monoxide emissions prediction for isooctane HCCI engine combustion using a multi-zone detailed kinetics solver. Paper No. SAE 2003-01-1821 (2003)
11. Hountalas, D.T., Kouremenos, D.A., Mavropoulos, G.C., Binder, K.B., Schwarz, V.: Multi-zone combustion modelling as a tool for DI Diesel engine development-application for the effects of injection pressure. Paper No. SAE 2004-01-0115 (2004)
12. Noda, T., Foster, D.E.: A numerical study to control combustion duration of hydrogen-fueled HCCI by using multi-zone chemical kinetics simulation. Paper No. SAE 2001-01-0250 (2001)
13. Xu, H.: Modelling of HCCI engines: comparison of single-zone, multi-zone and test data. Paper No. SAE 2005-01-2123 (2005)
14. Aceves, S.M., Flowers, D.L., Espinoza-Loza, F., Babajimopoulos, A., Assanis, D.N.: Analysis of premxed charge compression ignition combustion with a sequential fluid mechanics-multizone chemical kinetics model. Paper No. SAE 2005-01-0115 (2005)
15. Narayanaswamy, K.: Cycle simulation Diesel HCCI modelling studies and control. Paper No. SAE 2004-01-2997 (2004)
16. Narayanaswamy, K., Hessel, R.P., Rutland, C.J.: A new approach to model DI-Diesel HCCI combustion for use in cycle simulation studies. Paper No. SAE 2005-01-3743 (2005)
17. Hergart, C.-A., Barths, H., Siewert, R.M.: Modeling approaches for partially premixed compression ignition combustion. Paper No. SAE 2005-01-0218 (2005)
18. Y.Z. Zhang E.H. Kung D.C. Haworth 2004 A PDF method for multidimensional modeling of HCCI engine combustion: effects of turbulence/chemistry interactions on ignition timing and emissions Proc. Combust. Inst. 30 2763 2771
19. S.B. Pope 1997 Computationally efficient implementation of combustion chemistry using in situ adaptive tabulation Combust. Theory Model. 1 41 63 (Pubitemid 127668799)
20. O. Gicquel N. Darabiha D. Thévenin 2000 Laminar premixed hydrogen/air counterflow flame simulations using flame prolongation of ILDM with differential diffusion Proc. Combust. Inst. 28 1901 1908
21. J.A. van Oijen F.A. Lammers L.P.H. de Goey 2001 Modeling of complex premixed burner systems by using flamelet-generated manifolds Combust. Flame 127 2124 2134 (Pubitemid 33095052)
22. O. Colin A. Pires da Cruz S. Jay 2005 Detailed chemistry-based auto-ignition model including low temperature phenomena applied to 3-D engine calculations Proc. Combust. Inst. 30 2649 2656
23. H. Barths C. Felsch N. Peters 2009 Mixing models for the two-way-coupling of CFD codes and zero-dimensional multi-zone codes to model HCCI combustion Combust. Flame 156 130 139
24. Aceves, S.M., Flowers, D.L., Martinez-Frias, Smith, J.R., Westbrook, C.K., Pitz, W., Dibble, R., Christensen, M., Johansson, B.: A multi-zone model for prediction of HCCI combustion and emissions. Paper No. SAE 2000-01-0327 (2000)
25. Aceves, S.M., Flowers, D.L., Martinez-Frias, J., Smith, J.R., Westbrook, C.K., Pitz, W., Dibble, R., Wright, J.F., Akinyemi, W.C., Hessel, R.P.: A sequential fluid-mechanic chemical kinetic model of propane HCCI combustion. Paper No. SAE 2001-01-1027 (2001)
26. Babajimopoulos, A., Lavoie, G.A., Assanis, D.N.: Modelling HCCI combustion with high levels of residual gas fraction-a comparison of two VVA strategies. Paper No. SAE 2003-01-3220 (2003)
27. A. Babajimopoulos D.N. Assanis D.L. Flowers S.M. Aceves R.P. Hessel 2005 A fully coupled computational fluid dynamics and multi-zone model with detailed chemical kinetics for the simulation of premixed charge compression ignition engines J. Engine Res. 6 497 512
28. Flowers, D.L., Aceves, S.M., Babajimopoulos, A.: Effects of charge non-uniformity on heat release and emissions in PCCI engine combustion. Paper No. SAE 2006-01-1363 (2006)
29. Hessel, R.P., Foster, D., Aceves, S.M., Davisson, M., Espinosa-Loza, F.J., Flowers, D., Pitz, W., Dec, J.E., Sjoberg, M., Babajimopoulos, A.: Modeling iso-octane HCCI using CFD with multi-zone detailed chemistry; comparison to detailed specification data over a range of lean equivalence ratios. Paper No. SAE 2008-01-0047 (2008)
30. Felsch, C., Sloane, T., Han, J., Barths, H., Lippert, A.M.: Numerical investigation of recompression and fuel reforming in a SIDI-HCCI engine. Paper No. SAE 2007-01-1878 (2007)
31. Ferziger, J.H., Perić, M.: Computational methods for fluid dynamics. Springer, Berlin (2002)
32. Khalighi, B., El Thary, S.H., Haworth, D.C., Huebler, M.S.: Computation and measurement of flow and combustion in a four-valve engine with intake variations. Paper No. SAE 950287 (1995)
33. Ewald, J., Freikamp, F., Paczko, G., Weber, J., Haworth, D.C., Peters, N.: GMTEC: GMTEC Developer's Manual. Technical report, Advanced Combustion GmbH (2003)
34. Peters, N.: Turbulent Combustion. Cambridge Univ. Press, Cambridge (2000)
35. Felsch, C., Vanegas, A., Kerschgens, B., Peters, N., Hoffmann, K., Drews, P., Abel, D., Barths, H.: Systematic reduction of an interactively coupled CFD-multi-zone approach towards a stand-alone multi-zone model for PCCI combustion. In: Thiesel 2008: Thermo- and Fluid Dynamic Processes in Diesel Engines. Universidad Politécnica de Valencia, Valencia, Spain (2008)
36. N. Peters 1984 Laminar diffusion flamelet models in non-premixed turbulent combustion Prog. Energy Combust. Sci. 10 319 339
37. N. Peters 1986 Symposium (International) on Combustion Proc. Combust. Inst. 21 1231 1250
38. x and soot formation in DI-Diesel engines using detailed chemistry based on the interactive flamelet approach. Paper No. SAE 962057 (1996)
39. H. Barths C. Hasse N. Peters 2000 Computational fluid dynamics modelling of non-premixed combustion in direct injection diesel engines J. Engine Res. 1 249 267 (Pubitemid 33206975)
40. C. Hasse N. Peters 2005 A two mixture fraction flamelet model applied to split injections in a DI Diesel engine Proc. Combust. Inst. 30 2755 2762
41. C. Felsch M. Gauding C. Hasse S. Vogel N. Peters 2009 An extended flamelet model for multiple injections in DI Diesel engines Proc. Combust. Inst. 32 2775 2783
42. Willand, J., Nieberding, R.-G., Vent, G., Enderle, C.: The knocking syndrome: its cure and potential. Paper No. SAE 982483 (1998)
43. Law, D., Kemp, D., Allen, J., Kirkpatrick, G., Copland, T.: Controlled combustion in an IC-engine with a fully variable valve train. Paper No. SAE 2001-01-0251 (2001)
44. Duret, P., Lavy, J.: Gasoline controlled auto-ignition (CAI)-potential and prospects for the future automotive application. In: IMechE International Conference: 21st Century Emissions Technologies, London, UK (2000)
45. Oakley, A., Zhao, H., Ladommatos, N., Ma, T.: Experimental studies on controlled auto-ignition (CAI) combustion of gasoline in a 4-stroke engine. Paper No. SAE 2001-01-1030 (2001)
46. Santoso, H., Matthews, J., Cheng, W.: Characteristics of HCCI engine operating in the negative-valve-overlap mode. Paper No. SAE 2005-01-2133 (2005)
47. Ricardo Software: WAVE Basic Manual, Documentation/User's Manual, Version 5.0. Technical report, Ricardo Software (2003)
48. RWTH Aachen University and Bielefeld University: SFB 686 - Modellbasierte Regelung der homogenisierten Niedertemperatur-Verbrennung. http://www.sfb686. rwth-aachen.de