Development of wear and corrosion resistant cold-work tool steels produced by diffusion alloying

Wear

Volumn 267, Issue 1-4, 2009, Pages 449-457

  Huth, S ^a   Krasokha, N ^a   Theisen, W ^a  

^a RUHR UNIVERSITY BOCHUM   (Germany)

Author keywords

Corrosion; Diffusion alloying; NbC; PM; Tool steel; Wear

Indexed keywords

ABRASIVE WEARS; AQUEOUS CORROSION; COLD WORKS; CORROSION-RESISTANT; DIFFUSION ALLOYING; FINE DISPERSIONS; INTERSTITIAL ELEMENTS; INTERSTITIALS; MARTENSITIC STAINLESS STEELS; METAL MATRICES; METAL POWDER; MICROMECHANISMS; NBC; NEW ALLOYS; NEW MATERIAL; NEW PRODUCTION; NIOBIUM CARBIDE; PAPER TESTS; PM; PRODUCTION ROUTE; SCANNING ELECTRON MICROSCOPES; STEEL POWDER; THERMOCALC; THERMODYNAMIC SIMULATIONS; TUNDISH; WEAR; WEAR BEHAVIORS;

ALLOYING; ALLOYING ELEMENTS; ATOMIZATION; CARBIDES; CHROMIUM; CORROSION; DIFFUSION; GRAPHITE; HOT ISOSTATIC PRESSING; MARTENSITE; NIOBIUM; PERMANENT MAGNETS; POWDER METALS; SCANNING ELECTRON MICROSCOPY; SMELTING; STAINLESS STEEL; STEEL METALLURGY; VANADIUM; WEAR RESISTANCE;

TOOL STEEL;

EID: 65749086925     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2008.12.089     Document Type: Article

References (35)

1. B. Gehricke, I. Schruff, Trend in plastic mould steel applications, in: F. Jeglitsch (Ed.), Tool Steels in the Next Century: Proceedings of the 5th International Conference on Tooling, September 29-October 1, 1999, Leoben, Austria, pp. 83-90.
2. Bhadeshia K.D.H.H., and Honeycombe R. Steels: Microstructure and Properties. 3rd ed. (2006), Elsevier/Butterworth-Heinemann, Amsterdam
3. C. Kerschenbauer, M. Speidel, G. Lichtenegger, J. Sammer, K. Sammt, PM plastic mould steels-wear resistant and corrosion resistant martensitic chromium steels, in: J. Bergström, G. Fredrikkson, M. Johansson, O. Kotik, F. Thuvander (Eds.), The Use of Tool Steels: Experience and Research: Proceedings of the 6th International Tooling Conference at Karlstad University, vol. 1, September 10-13, 2002, pp. 293-301.
4. Hackl G., Lenger H., Sammer J., and Makovec H. Powder-metallurgical production, structural conditions and properties of the superalloyed corrosion resistant plastic mould steel M390 ISOMATRIX. Berg- und Hüttenmännische Monatshefte 140 1 (1995) 68-77
5. Sharma C.R., Lakshmanan K.V., and Kirkaldy S.J. Solubility of niobium carbide and niobium carbonitride in alloyed austenite and ferrite. Metallurgical Transactions A: Physical Metallurgy and Materials Science 15 3 (1984) 545-553
6. F. Heisterkamp, R.S. Keown, Columbium in High Speed Tool Steels, in: G.H.M. Wells, W.L. Lherbier (Eds.), Processing and Properties of High Speed Tool Steels: Proceedings of a symposium by the Ferrous Metallurgy Committee of The Metallurgical Society of AIME at the 109th AIME annual meeting, Las Vegas, Nevada, February 26-28, 1980, pp. 104-123.
7. C. Escher, U. Djuren, S. Siebert, H. Berns, Development of a stainless cold work tool steel, in: M. Rosso (Ed.), Tooling Materials and Their Applications From Research to Market: 7th International Tooling Conference, vol. 1, Politecnico di Torino, 2006, pp. 69-75.
8. Roberts A.G., Krauss G., and Kennedy L.R. Tool Steels. 5th ed. (1998), ASM International, Materials Park, Ohio
9. Karagöz S., and Fischmeister F.H. Niobium-alloyed high-speed steel by powder-metallurgy. Metallurgical Transactions A: Physical Metallurgy and Materials Science 19 6 (1988) 1395-1401
10. Ahn H.J., Kim J.Y., Lee S., and Chung H. Effect of niobium on the mechanical properties of powder-metallurgy processed high-speed steels. Zeitschrift Für Metallkunde 96 12 (2005) 1426-1430
11. F. Jeglitsch, Niobium in tool steels and cemented carbides, in: Niobium Science and Technology: Proceedings of the International Symposium Niobium 2001 held in Orlando, Florida, USA, December 2-5, 2001, pp. 1001-1039.
12. Löcker D.K., Karagöz S., Jeglitsch F., and Fischmeister F.H. The making of high-speed steel by charging NbC-powder into a matrix-melt. Berg- und Hüttenmännische Monatshefte 133 3 (1988) 139-146
13. G. Wang, Härtbare nichtrostende PM-Stähle und Stahlverbunde mit hohem Stickstoffgehalt, Vol. 277 of Fortschritt-Berichte VDIReihe 5, Grund- und Werkstoffe, PhD thesis, Ruhr-Universität Bochum, Bochum, 1992.
14. Berns H., and Wang G. Stainless martensitic PM-HNS. Proceedings of High Nitrogen Steels, HNS (1993) 566-571
15. G. Hackl, Problematik von hoch nioblegierten Schnellarbeitsstählen, PhD thesis, Montanuniverität Leoben, Leoben, 1991.
16. Schneiders T., Berns H., and Theisen W. Neue Werkzeugwerkstoffe aus Pulvermischungen. HTM Zeitschrift für Werkstoffe Wärmebehandlung Fertigung 60 3 (2005) 112-124
17. T. Schneiders, Neue pulvermetallurgische Werkzeugstähle, Vol. 721 of Fortschritt-Berichte VDIReihe 5, Grund- und Werkstoffe, PhD thesis, Ruhr-Universität Bochum, 2005.
18. Theisen W., Siebert S., and Huth S. Wear resistant steels and casting alloys containing niobium carbide. Steel Research International 78 12 (2007) 921-928
19. S. Huth, W. Theisen, Diffusion alloying-a new manufacturing method for PM tool steels, in: European Powder Metallurgy Association (Ed.), EuroPM2008 Proceedings: International Powder Metallurgy Congress & Exhibition, vol. 2, 2008, pp. 9-14.
20. TCC-ThermoCalc Software: User's Guide Version R, Stockholm, Schweden, 2006.
21. Friedrich C., Berg G., Broszeit E., and Berger C. Datensammlung zu Hartstoffeigenschaften. Mat. -wiss. u. Werkstofftech. 28 (1997) 59-76
22. Berns H., and Theisen W. Eisenwerkstoffe - Stahl und Gusseisen. 4th ed. (2008), Springer, Berlin
23. DIN, EN ISO 6507-1, Metallic Materials - Vickers Hardness Test - Part 1: Test Method (03-2006).
24. Theisen W., and Karlsohn M. Hot direct extrusion-a novel method to produce abrasion-resistant metal-matrix composites. Wear 263 (2007) 896-904
25. C. Tornberg, A. Fölzer, New Optimised Manufacturing Route for PM Tool Steels and High Speed Steels, in: J. Bergström, G. Fredrikkson, M. Johansson, O. Kotik, F. Thuvander (Eds.), The Use of Tool Steels: Experience and Research: Proceedings of the 6th International Tooling Conference at Karlstad University, vol. 1, September 10-13, 2002, Motala Grafiska AB, 2002, pp. 305-316.
26. Fischmeister F.H., Karagöz S., and Andrén O.H. An atom probe study of secondary hardening in high speed steels. Acta Metallurgica 36 4 (1988) 817-825
27. Bargel H.-J., and Schulze G. Werkstoffkunde. 5th ed. (1988), VDI-Verl, Düsseldorf
28. Berns H., Siekmann G., and Wiesenecker I. Gefüge und Bruch vergüteter Federstähle: Gefüge und Bruchmorphologie. Draht. Fachzeitschrift für die Drahtherstellung und Drahtverarbeitung 35 5 (1984) 247-252
29. Axén N., and Zum Gahr K.-H. Wear of TaC and TiC steel composite hardfacings by soft and hard abrasives. Materialwissenschaft und Werkstofftechnik 23 10 (1992) 360-367
30. Berns H. Comparison of wear resistant MMC and white cast iron. Wear 254 1-2 (2003) 47-54
31. Czichos H., and Habig K.-H. Tribologie-Handbuch: Reibung und Verschleiß (1992), Vieweg, Wiesbaden
32. Zum Gahr K.-H., and Eldis T.G. Abrasive wear of white cast irons. Wear 64 1 (1980) 175-194
33. M.A. Kliauga, A. Padilha, G.R. Rotondaro, W. Reick, Untersuchungen zum Verschleißverhalten von Legierungen im System Fe-Cr-C - ein Vergleich zwischen Stift-Scheibe-Verfahren und dem Verfahren nach Bond, in: H. Grewe (Ed.), Reibung und Verschleiß: DGM Informationsges, 1992, pp. 191-198.
34. K.-H. Zum Gahr, Verschleiß von Metallen, Keramiken und Polymeren im Vergleich, in: K.-H. Zum Gahr (Ed.), Reibung und Verschleiß bei metallischen und nichtmetallischen Werkstoffen: DGM-Informationsges, Verl., 1990, pp. 77-94.
35. Berns H., and Trojahn W. Einfluß der Wärmebehandlung auf Restaustenitgehalt, Verschleißwiderstand und mechanische Eigenschaften ledeburitischer Chromstähle. Härterei Technische Mitteilungen 40 2 (1985) 65-72