On the extension of CP models to address cathodic protection under a delaminated coating

Corrosion Science

Volumn 51, Issue 5, 2009, Pages 962-970

  Allahar, Kerry N ^a   Orazem, Mark E ^a  

^a J Crayton Pruitt Family Department of Biomedical Engineering   (United States)

Author keywords

C. Cathodic protection; Coatings; Corrosion

Indexed keywords

ANALYTIC EXPRESSIONS; C. CATHODIC PROTECTION; ELECTRO-CHEMICAL REACTIONS; GOVERNING EQUATIONS; METALLIC STRUCTURES; METALLIC SURFACES; NON-LINEAR; ON CURRENTS; PARTIAL DIFFERENTIALS; POTENTIAL DISTRIBUTIONS; POTENTIAL DROPS;

CATHODIC PROTECTION; CORROSION; DROPS; METALLIC COMPOUNDS; PIPELINES;

PROTECTIVE COATINGS;

EID: 65049090593     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2009.01.023     Document Type: Article

References (64)

1. Jones D.A. Principles and Prevention of Corrosion (1996), Prentice Hall, Upper Saddle River, NJ
2. Dwight H.B. Calculations of resistance to ground. Electrical Engineering 55 (1936) 1319
3. Morgan J. Cathodic Protection. second ed. (1993), NACE, International, Houston, TX
4. Newman J.S. Cathodic protection with parallel cylinders. Journal of the Electrochemical Society 138 (1991) 3554-3560
5. Telles J., Wrobel L., Mansur W., and Azevedo J. Boundary elements for cathodic protection problems. In: Brebbia C.A., and Maier G. (Eds). Boundary Elements VII vol. 1 (1985), Springer-Verlag, Heidelberg 63-71
6. J.M. Chuang, Numerical solution of nonlinear boundary value problems arising in corrosion and electroplating modeling with applications to 3D ships and marine structures, Ph.D. thesis, Technical University of Nova Scotia, 1986.
7. Zamani N., Chuang J., and Porter J. BEM simulation of cathodic protection system employed in infinite electrolytes. International Journal for Numerical Methods in Engineering 24 (1987) 605-620
8. Nisancioglu K. Predicting the time dependence of polarization on cathodically protected steel in seawater. Corrosion 43 (1987) 100-111
9. Nisancioglu K., Gartland P.O., Dahl T., and Sander E. Role of surface structure and flow rate on the polarization of cathodically protected steel in seawater. Corrosion 43 (1987) 710-718
10. Nisancioglu K. Design techniques in cathodic protection engineering. In: White R., Bockris J.O.M., and Conway B.E. (Eds). Modern Aspects of Electrochemistry vol. 23 (1992), Plenum Press, New York 149
11. Santiago J.A.F., and Telles J.C.F. On boundary elements for simulation of cathodic protection systems with dynamic polarization curves. International Journal of Numerical Methods in Engineering 40 (1997) 2611-2627
12. Brichau F., and Deconinck J. A numerical-model for cathodic protection of buried pipes. Corrosion 50 1 (1994) 39-49
13. Kennelley K.J., Bone L., and Orazem M.E. Current and potential distribution on a coated pipeline with holidays. 1: Model and experimental verification. Corrosion 49 (1993) 199-210
14. Orazem M.E., Kennelley K.J., and Bone L. Current and potential distribution on a coated pipeline with holidays. 2: A comparison of the effects of discrete and distributed holidays. Corrosion 49 3 (1993) 211-219
15. Esteban J.M., Orazem M.E., Kennelley K.J., and Degerstedt R.M. Mathematical models for cathodic protection of an underground pipeline with coating holidays. 1: Theoretical development. Corrosion 53 (1997) 264-272
16. Esteban J.M., Orazem M.E., Kennelley K.J., and Degerstedt R.M. Mathematical models for cathodic protection of an underground pipeline with coating holidays. 2: Case studies of parallel anode cp systems. Corrosion 53 (1997) 427-436
17. D. Riemer, M. Orazem, Development of mathematical models for cathodic protection of multiple pipelines in a right of way, in: Proceedings of the 1998 International Gas Research Conference, Gas Research Institute, GRI, Chicago, 1998, p. 117, Paper TSO-19.
18. D.P. Riemer, M.E. Orazem, Cathodic protection of multiple pipelines with coating holidays, in: M.E. Orazem (Ed.), Procedings of the NACE99 Topical Research Symposium: Cathodic Protection: Modeling and Experiment, NACE, NACE International, Houston, TX, 1999, pp. 65-81.
19. D.P. Riemer, Modeling cathodic protection for pipeline networks, Ph.D. thesis, University of Florida, Gainesville, Florida, 2000.
20. Riemer D.P., and Orazem M.E. Application of boundary element models to predict effectiveness of coupons for assessing cathodic protection of buried structures. Corrosion 56 8 (2000) 794-800
21. D.P. Riemer, M.E. Orazem, Modeling coating flaws with non-linear polarization curves for long pipelines, in: R.A. Adey (Ed.), Corrosion and Boundary Element Methods, Advances in Boundary Elements, vol. 12, WIT Press, Southampton, UK, 2005, pp. 225-259.
22. Sharland S.M. A review of the theoretical modelling of crevice and pitting corrosion. Corrosion Science 27 3 (1987) 289-323
23. A. Turnbull, Review of modelling of pit propagation kinetics, NPL DMM(A)65, National Physical Laboratory, Middlesex, England, March 1992.
24. Song F.M., Kirk D.W., Graydon J.W., and Cormack D.E. Steel corrosion under a disbonded coating with a holiday. Part 1: Tmodel and validation. Corrosion 58 12 (2002) 1015-1024
25. Song F.M., Kirk D.W., Graydon J.W., and Cormack D.E. Steel corrosion under a disbonded coating with a holiday. Part 2: Corrosion behavior. Corrosion 59 1 (2003) 42-49
26. Leng A., Streckel H., and Stratmann M. The delamination of polymeric coatings from steel. 2: First stage of delamination, effect of type and concentration of cations on delamination, chemical analysis of the interface. Corrosion Science 41 (1999) 579-597
27. Leng A., Streckel H., Hofmann K., and Stratmann M. The delamination of polymeric coatings from steel. 3: Effect of the oxygen partial pressure on the delamination reaction and current distribution at the metal/polymer interface. Corrosion Science 41 (1999) 599-620
28. Furbeth W., and Stratmann M. The delamination of polymeric coatings from electrogalvanised steel - a mechanistic approach.1: Delamination from a defect with intact zinc layer. Corrosion Science 43 (2001) 207-227
29. Furbeth W., and Stratmann M. The delamination of polymeric coatings from electrogalvanised steel - a mechanistic approach. 2: Delamination from a defect down to steel. Corrosion Science 43 (2001) 229-241
30. Allahar K.N., Orazem M.E., and Ogle K. Mathematical model for cathodic delamination using a porosity-pH relationship. Corrosion Science 49 (2007) 3638-3658
31. Huang V., Allely C., Ogle K., and Orazem M.E. A mathematical model for cathodic delamination of coated metal including a kinetic pH-porosity relationship. Journal of the Electrochemical Society 155 (2008) C279-C292
32. K. Allahar, Mathematical modeling of disbonded coating and cathodic delamination systems, Ph.D. thesis, University of Florida, Gainesville, Florida, 2003.
33. M.E. Orazem, D.P. Reimer, C. Qiu, K. Allahar, Computer simulations for cathodic protection of pipelines, in: F. King, J. Beavers (Eds.), Proceedings of the Corrosion/2004 Research topical Symposium: Corrosion Modeling for Assessing the Condition of Oil and Gas Pipelines, NACE, NACE, Houston, TX, 2004, pp. 25-52.
34. Orazem M., Esteban J., Kenelley K., and Degerstedt R. Mathematical models for cathodic protection of an underground pipeline with coating holidays. Part 1: Theoretical development. Corrosion 53 4 (1997) 264-272
35. G.M. Sabde, Study of current/potential distribution in a cathodically protected crevice, Ph.D. thesis, Clarkson University, 1995.
36. Chin D.T., and Sabde G.M. Modeling transport process and current distribution in a cathodically protected crevice. Corrosion 56 8 (2000) 783-793
37. Chin D.T., and Sabde G.M. Current distribution and electrochemical environment in a cathodically protected crevice. Corrosion 55 3 (1999) 229-237
38. Newman J.S. Electrochemical Engineering. second ed. (1991), Prentice-Hall, Englewood Cliffs, New Jersey
39. Bard A.J., and Faulkner L.R. Electrochemical Methods (1980), John Wiley and Sons, Inc., NY, New York
40. Tectran version 1.0, developed by N. Sridhar, Center for Nuclear Waste Regulatory Analyses, Southwest Research Institute, San Antonio, Texas, 1999.
41. Grasshoff K. Marine Electrochemistry (1981), Springer, Berlin pp. 327-420
42. Newman J.S., Hanson D.N., and Vetter K. Potential distribution in a corroding pit. Electrochimica Acta 22 (1977) 829-831
43. Verbrugge M.W., Baker D., and Newman J.S. Reaction distribution in a corroding pit. Electrochimica Acta 38 12 (1993) 1649-1659
44. Harb J.N., and Alkire R.C. Transport reaction during pitting corrosion of Ni in 0.5 m Nacl. Journal of the Electrochemical Society 138 9 (1991) 2594-2600
45. Verhoff M., and Alkire R. Experimental and modeling studies of single pits on pure aluminum in pH 11 NaCl solutions. I: Laser initiated single pits. Journal of the Electrochemical Society 147 4 (2000) 1349-1358
46. Laycock N.J., and White S.P. Computer simulation of single pit propagation in stainless steel under potentiostatic control. Journal of the Electrochemical Society 148 7 (2001) B264-B275
47. Sharland S.M., and Tasker P.W. A mathematical model of crevice and pitting corrosion. I: The physical model. Corrosion Science 28 (1988) 603-620
48. Tester J.W., and Isaacs H.S. Diffusional effects in simulated localized corrosion. Journal of the Electrochemical Society 122 11 (1975) 1438-1445
49. Alkire R., and Siitari D. The location of cathodic reaction during localized corrosion. Journal of the Electrochemical Society 126 1 (1979) 15-22
50. Gravano S.M., and Galvele J.R. Transport processes in passivity breakdown. III: Full hydrolysis plus ion migration plus buffers. Corrosion Science 24 (1984) 517-534
51. Galvele J.R. Transport processes and the mechanism of pitting of metals. Journal of the Electrochemical Society 123 4 (1976) 464-474
52. Galvele J.R. Transport processes in passivity breakdown. II.Full hydrolysis of the metal ions. Corrosion Science 21 8 (1981) 551-579
53. Sharland S.M. A mathematical model of crevice pitting corrosion. II. The mathematical solution. Corrosion Science 28 (1988) 621-630
54. Watson M., and Postlethwaite J. Numerical simulation of crevice corrosion of stainless steels and nickel alloys in chloride solutions. Corrosion 46 (1990) 522-530
55. Turnbull A., and Thomas J.G.N. A model of crack electrochemistry for steels in the active state based on mass transport by diffusion and ion migration. Journal of the Electrochemical Society 129 7 (1982) 1412-1422
56. Sharland S.M., Jackson C.P., and Diver A.J. A finite-element model of the propogation of corrosion crevices and pits. Corrosion Science 29 9 (1989) 1149-1166
57. Sharland S.M. A mathematical model of the initiation of crevice corrosion in metals. Corrosion Science 33 2 (1992) 183-201
58. Pariona M.M., and Muller I.L. Numerical simulation and factorial design of titanium crevice corrosion in sodium chloride solution. Computers Chemical 22 5 (1998) 377-384
59. Turnbull A., and Ferris D.H. Mathematical modeling of the electrochemistry in corrosion fatigue cracks in structural steel cathodically protected in sea water. Corrosion Science 26 8 (1986) 601-628
60. Sridhar N., Dunn D.S., and Seth M. Application of a general reactive transport model to predict environment under disbonded coatings. Corrosion 57 7 (2001) 598-613
61. Walton J.C., Cragnolino G., and Kalandros S.K. A numerical model of crevice corrosion for passive and active metals. Corrosion Science 38 1 (1996) 1-18
62. Song F.M., and Sridhar N. A two-dimensional model for steel corrosion under a disbonded coating due to oxygen with or without cathodic protection. Part 1: Full numerical solution. Corrosion (2006) 676-686
63. Song F.M., and Sridhar N. A two-dimensional model for steel corrosion under a disbonded coating due to oxygen with or without cathodic protection. Part 2: Model simplification for practical application. Corrosion (2006) 873-882
64. Rouw A.C. Model epoxy powder coatings and their adhesion to steel. Progress in Organic Coatings 34 (1998) 181-192