Computer-aided process planning (CAPP) in manufacturing systems and their implementation

Operational Methods in Computer-Aided Design: Computer-Aided Design, Engineering, and Manufacturing: Systems Techniques and Applications

Volumn 3, Issue , 2000, Pages 5-1-5-68

  Rao, P Nageswara ^a   Jasthi, Siva R K ^b  

^a UNIVERSITI TEKNOLOGI MARA   (Malaysia)

^b DYNAMICS RESEARCH CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 64949144077     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (80)

1. Arora, V., 1991, Pocket Identification and Setup Planning in Computer Aided Process Planning of Rotational Parts, Unpublished M. Tech. Thesis, NC Laboratory, Department of Mechanical Engineering, Indian Institute of Technology, New Delhi, India.
2. Balakrishnan, P. and DeVries, M. F., 1982, A review of computerized machinability data base systems. Proceedings of 10th North American Manufacturing Research Conference, 348-386.
3. Beightler, C. S. and Phillips, D. T., 1976, Applied Geometric Programming, John Wiley and Sons, Inc, NY.
4. Brewer, R. C. and Rueda, R., 1963, A simplified approach to the optimum selection of machining parameters. Engineers’ Digest, 24(9), 133-151.
5. Brown, R. H., 1962, On the selection of economical machining rates. International Journal Production Research, 1(1), 1-22.
6. Butterfield, W. R., Green, M. K., Scott, D. C., and Stoker, W. J., 1986, Part features for process planning, CAM-I report: C-85-PPP-03.
7. Case, K. and Gao, J., 1993, Feature technology: an overview, Int. J. Computer Integrated Manufacturing, 6(1&2), 2-12.
8. Chandrupatla, T. R. and Belegundu, A. D., 1991, Introduction to Finite Elements in Engineering, Prentice-Hall, New Delhi.
9. Chang, T. C. and Wysk, R. A., 1981, An integrated CAD/automated process planning system, AIIE Transactions, 13(3), 223-233.
10. Chang, T. C. and Wysk, R. A., 1984, Integrating CAD and CAM through automated process planning, International Journal of Production Research, 22(5), 877-894.
11. Chen, S. J., Hinduja, S., and Barrow, G., 1989, Automatic tool selection for rough turning operations, Int. Journal of Machine Tools and Manufacture, 29(4), 535-553.
12. Chua, M. S., Loh, H. T., Wong, Y. S., and Rahman, M., 1991, Optimization of cutting conditions for multipass turning operations using sequential quadratic programming. Journal of Materials Processing Technology, 28(1/2), 253-262.
13. Clark, A. C. and South, N. E., 1987, Feature based design of mechanical parts, Proc. AUTOFACT 87, 169-176.
14. Colding, B. N., 1992, Intelligent selection of machining parameters for metal cutting operations: the least expensive way to increase productivity. Robotics & Computer Integrated Manufacturing, 9(4/5), 407-412.
15. Crookall, J. R., 1969, The performance-envelope concept in the economics of machining. International Journal of Machine Tool Design and Research, 9, 261-278.
16. Cunningham, J. J. and Dixon, J. R., 1988, Designing with features: the origin of features, Proc. ASME Computers in Engineering Conf., v. 1, San Francisco, USA, 237-243.
17. Dixon, J. R., Cunningham, J. J., and Simmons, M. K., 1987, Research in designing with features, Intelligent CAD, I, (Ed.), Yoshikawa, H. and Gossard, D., Proc. IFIP TC5/WG 5.2 Workshop on Intelligent CAD, Boston, MA, 137-148.
18. Domazet, D. S. and Lu, S. C. Y, 1992, Concurrent design and process planning of rotational parts, Annals of the CIRP, 41(1), 181-184.
19. Dong, X. and Wozny, M. J., 1990, Feature volume creation for computer aided process planning, in: Geometric Modeling for Product Engineering, (Ed.) Wozny, M. J., Turner, J. U. and Priess, K., Elsevier Science Publishers B. V., North Holland, 385-403.
20. Drake, S. and Sela, S., 1989, A foundation for features, Mechanical Engineering, 111, 66-73.
21. Ermer, D. S. and Kromodihardjo, S., 1981, Optimization of multipass turning with constraints. Journal of Engineering for Industry, Transactions of ASME, 103(4), 462-468.
22. Evershiem, W. and Holz, B., 1982, Computer aided programming of NC machine tools by using the system AUTAP-NC, Annals of the CIRP, 31(1), 323-327.
23. Faux, I. D., 1988, Modeling of components and assemblies in terms of shape primitives based on standard D & T surface features, in: Geometric Modeling for Product Engineering, (Ed.) Wozny, M.J., Turner, J. U., and Preiss, K., Elsevier Science Publishers B. V., North-Holland, 259-275.
24. Gindy, N. N. Z., Huang, X, and Ratchev, T. M., 1993, Feature-based component model for computer-aided process planning systems, Int. J. Computer Integrated Manufacturing, 6(1&2), 20-26.
25. Gindy, N. N. Z., 1989, A hierarchical structure for form features, Int. J. Prod. Res., 27, 2089-2103.
26. Gossard, D. C., Zuffante, R. P., and Sakurai, H., 1988, Representing dimensions, tolerances and features in MCAE systems, IEEE Computer Graphics & Applications, March, 51-59.
27. Gupta, N. and Kapoor, S., 1986, Computer Aided Process Planning and Part Programming for CNC Turning Centers Using Group Technology, Unpublished B.Tech. Thesis, N C Laboratory, Department of Mechanical Engineering, Indian Institute of Technology, New Delhi, India.
28. Halevi, G. and Weill, R., 1985, Influence of manufacturing tolerances on fixturing of machined parts in process planning systems, 1st CIRP Working Seminar on CAPP, Paris, 31-34.
29. Halevi, G. and Weill, R. D., 1995, Principles of Process Planning A Logical Approach, Chapman & Hall, London.
30. Hati, S. K. and Rao, S. S., 1976, Determination of optimal cutting conditions using deterministic and probabilistic approaches. Journal of Engineering for Industry, Transactions of ASME, 98(1), 354-359.
31. Hayes, C., 1990, Machine Planning: a Model of an Expert Level Planning process, Ph.D. thesis, The Robotics Institute, Carnegie Mellon University, Pittsburgh, PA.
32. Hayes, G. M. and Davis, R. P., 1979, A discrete variable approach to machine parameter optimization, AIIE Transactions, 11(2), 155-159.
33. Henderson, M. R. and Anderson, D. C., 1984, Computer recognition and extraction of form features: A CAD/CAM link, Computers in Industry, 5(4), 329-339.
34. Hinduja, S. and Barrow, G., 1986, TECHTURN: a technologically oriented system for turned components, Proc. 1st Int. Conf. on CAPE, Edinburgh, UK, 255-260.
35. Hinduja, S. and Huang, H., 1989a, OP-PLAN: an automated operation planning system for turned components, Proc. of Inst. of Mech. Engrs., 203(B3), 145-158.
36. Hinduja, S. and Huang, H., 1989b, Automatic determination of workholding parameters for turned components, Proc. of Inst. of Mech. Engrs., 203(B2), 101-112.
37. Hinduja, S., Petty, D. J., Tester, M., and Barrow, G., 1985, Calculation of optimum cutting conditions for turning operations. Journal of Engineering Manufacture, Proceedings of Institution of Mechanical Engineers, 199(B2), 81-92.
38. Iwata, K. and Arai, E., 1983, Development of integrated modeling system for CAD/CAM of machine products, in: Advances in CAD/CAM, (Ed.) Ellis, T.M.R. and Semenkov, O. I., North Holland Publishing Company.
39. Iwata, K., Murotsu, Y., and Oba, F., 1977, Optimization of cutting conditions for multipass operations considering probabilistic nature in machining processes. Journal of Engineering for Industry, Transactions of ASME, 99(1), 210-217.
40. Jasthi, S. R. K., 1993, Some Studies on Form Features in the Development of a CAPP system, Unpublished Ph.D. Thesis, Department of Mechanical Engineering, Indian Institute of Technology, New Delhi, India.
41. Jasthi, S. R. K., Prasad, A. V. S. R. K., Manidhar, G., Rao, P. N., Rao. U. R. K., and Tewari, N. K., 1994, A feature based part description system for Computer Aided Process Planning, Journal of Design and Manufacturing, Vol. 4, 67-80.
42. Jasthi, S. R. K., Rao, P. N., and Tewari, N. K., 1995, Studies on Process Plan Representation in CAPP system, Journal of Computer Integrated Manufacturing Systems, Vol. 8, No 3, 173-184.
43. Joshi, S., Chang, T. C., and Liu, C. R., 1986, Process planning formalization in an AI framework, Artificial Intelligence, 1(1), 45-53.
44. Joshi, S., 1990, Feature recognition and geometric reasoning for some process planning activities, in: Geometric Modeling for Product Engineering, (Ed.) Wozny, M. J., Turner, J. M., and Preiss, K., Elsevier Science Publishers B. V., North-Holland, 363-384.
45. Kals, H. J. J. and Hijink, J. A. W., 1978, A computer aid in the optimization of turning conditions in multi-cut operations. Annals of the CIRP, 27(1), 465-469.
46. Kalta, M. and Davies, B. J., 1992c, Guidelines to build 2D CAD models of turned components in CAD-CAPP integration, Internal Report, Mechanical Dept., UMIST, UK.
47. Kang, T. S. and Nnaji, B. O., 1993, Feature representation and classification for automatic process planning systems, Journal of Manufacturing Systems, 12(2), 133-145.
48. Kimura, F., Suzuki, H., and Wingard, L., 1986, A uniform approach to dimensioning and tolerancing in product modeling, Proc. 2nd Int. Conf. on Comp. Appl. in Production & Eng., Copenhagen, 165.
49. Klein, A., 1988, A Solid Groove: feature based programming of parts, Mechanical Engineering, 110, 37-39.
50. Kochenberger, G. A., Woolsey, R. E. D., and McCarl, B. A., 1973, On the solution of geometric programs via separable programming. Operational Research Quarterly, 24(2), 285-294.
51. Kovan, V., 1959, Fundamentals of Process Engineering, Moscow, Foreign language publishing house.
52. Kramer, T. R., 1992b, A library of material removal shape element volumes (MRSEVs), National Institute of Standards and Technology report (NISTIR 4809).
53. Kramer, T. R., 1992a, Issues concerning material removal shape element volumes (MRSEVs), National Institute of Standards and Technology Report (NISTIR 4804).
54. Kusiak, A., 1989, Process planning: a knowledge based and optimization perspective, Proc. IFAC on Decisional Structures in Automated Manufacturing, Genova, Italy, 133-138.
55. Kusiak, A., 1990, Optimal selection of machinable volumes, IIE Transactions, 22(2), 151-159.
56. Manidhar, G., 1995, Some Studies in the Design and Development of a CAPP System for Rotational Parts with C-axis Features, Unpublished Ph.D. Thesis, Dept. of Mech. Eng., IIT, New Delhi.
57. Matropoulos, P. G. and Hinduja, S., 1991, Automatic tool selection for rough turning, International Journal of Production Research, 29(1), 1185-1120.
58. Nau, D. S., Gupta, S. K., Kramer, T. R., Regli, W. C., and Zhang, G., 1993, Development of machining alternatives based on MRSEVs, Proc. of ASME Computers in Engineering Conference.
59. Okushima, K. and Hitomi, K., 1964, Study of economical machining-analysis of maximum profit cutting speed. International Journal of Production Research, 3(1), 73-78.
60. Opitz, H., 1970, A Classification System to Describe Workpieces, Pergamon Press, Elmsford, New York.
61. Prasad, A. V. S. R. K., 1994, Optimal Selection of Cutting-process Parameters in a Computer Aided Process Planning System, Unpublished Ph.D. Thesis, Dept. of Mech. Engg., IIT, New Delhi.
62. Prasad, A. V. S. R. K., Jasthi, S. R. K., Manidhar, G., Rao, P. N., Rao, U. R. K., and Tewari, N. K., 1993, A survey of approaches to the optimization of process parameters in turning operations. Proceedings of 2nd International Conference on Computer Integrated Manufacturing, Singapore, 916-920.
63. Prasad, A. V. S. R. K., Rao, P. N., and Rao, U. R. K., 1994a, Computer Aided selection of Optimal Parameters for Boring process, Proc. 10th National Convention of Mechanical Engineers, Organized by Institution of Engineers, India at Hyderabad, 207-214.
64. Prasad, A. V. S. R. K., Rao, P. N., and Rao, U. R. K., 1994b, Optimization of process parameters for facing operations, Proc. of ISME Conference, Roorkee, India.
65. Ranyak, P. S. and Fridshal, R., 1988, Features for tolerancing a solid model, Proc. ASME Computers in Engineering Conference, 1, 263.
66. Requicha, A. A. G. and Chan, S. C., 1986, Representation of geometric features, tolerances and attributes in solid modellers based on constructive geometry, IEEE Journal of Robotics and Automation, RA-2(3), 156.
67. Requicha, A. A. G., 1983, Toward a theory of geometric tolerancing, Int. J. of Robotics Research, 2(4), 45-60.
68. Shah, J. J. and Rogers, M. T., 1988b, Functional requirements and conceptual design of the feature based modeling system, Computer Aided Engineering Journal, 5, 9-15.
69. Shah, J. J., 1991, Assessment of features technology, Computer Aided Design, 23(5), 331-343.
70. Sim, S. K. and Leong, K. F., 1989, Prototyping a feature based modeling system for automated process planning, Journal of Mechanical Working Technology, 20, 195-205.
71. Suzuki, H., Inui, M., Kimura, F., and Sata, T., 1988, A product modeling system for constructing intelligent CAD and CAM systems, Robotics & CIM, 4(3/4), 483-489.
72. Vogel, S. A. and Adard, E.J., 1981, The AUTOPLAN process planning system, Proc. of 18th NC Society, Annual Meeting and Technical Conference, Dallas, TX, 422-429.
73. Weill, R., 1988, Integrating dimensioning and tolerancing in computer aided process planning, Robotics & CIM, 4(1/2), 41-48.
74. Widia, 1986, Recommended Data for Turning Ferrous Materials (Publication No. W 5.3-10.3 e 486).
75. Widia, 1989, Widax Tools for External and Internal Machining. Widia (India) Limited, WMC-042-89.
76. Wilson, P. R. and Pratt, M. J., 1988, A taxonomy of features for solid modeling, in Geometric Modeling for CAD Applications, (Ed.) Wozny, M. J., McLaughlin, H. W., and Encarnacao, J. L., Elsevier Science Pub. B.V. (North-Holland), 125-136.
77. Wright, T. L., and Hannam, R. G., 1989, A feature based design for manufacture: CAD/CAM package, Computer Aided Engineering Journal, 6, 215-220.
78. Yang, D. Y. and Seireg, A., 1992, Machining parameter optimization for specified surface conditions. Journal of Engineering for Industry, Transactions of ASME, 114(2), 254-257.
79. Yeo, S. H., Rahman, M., and Wong, Y. S., 1990, A frame-based approach for the making of holes in turned parts and its further development, Journal of Materials Processing Technology, 232, 149-162.
80. Zhang, S., and Gao, W. D., 1984, TOJICAP: A system of computer aided process planning system for rotational parts, Annals of the CIRP, 33(1), 299-301.