Addressing durability of rubber compounds

Rubber Chemistry and Technology

Volumn 77, Issue 3, 2004, Pages 476-511

  Huntink, N M ^a   Datta, R N ^a   Noordermeer, J W M ^b  

^a Research Institute   (Netherlands)

^b UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

AGING OF MATERIALS; ANTIOXIDANTS; AROMATIC COMPOUNDS; DURABILITY; MOLECULAR WEIGHT; OXIDATION; OXIDATION RESISTANCE; OZONE; RUBBER;

ANTIDEGRADANTS; ANTIOZONANTS; DOMAIN SIZE;

RUBBER COMPOUNDING;

EID: 6444236920     PISSN: 00359475     EISSN: None     Source Type: Journal    
DOI: 10.5254/1.3547833     Document Type: Article

References (119)

1. R. N. Datta, N. M. Huntink, RubberChem'01, Brussels, paper 5 (2001).
2. J. R. Davies, Plasti. Rubber Inter. 11 (1), 16 (1986).
3. R. W. Keller, RUBBER CHEM. TECHNOL. 58, 637 (1985).
4. B. L. Stuck, Technical Report, Sovereign Chemical Company, Sept. 17, 1995.
5. J. Zhao, G. N. Ghebremeskel, RUBBER CHEM. TECHNOL. 74, 409 (2001).
6. W. H. Waddel, RUBBER CHEM. TECHNOL. 71, 590 (1998).
7. R. W. Layer, R. P. Lattimer, RUBBER CHEM. TECHNOL. 63, 426 (1990).
8. D. Erhardt, Int. Polym. Sci. Technol. 25 (7), p. 11 (1998).
9. S. K. Rakovski, D. R. Cherneva, Int. J. Polym. Mater. 14, 21 (1990).
10. G. Scott, RUBBER CHEM. TECHNOL. 58, 269 (1985).
11. S. S. Solanky and R. P. Singh, Prog. Rubber Plast. Technol. 17 (1), 13 (2001).
12. R. L. Gray, R. E. Lee, Chem. Technol. Polym. Addit., 21(1999).
13. J. C. Ambelang, R. H. Kline, O. M. Lorenz, C. R. Parks, and C. Wadelin, RUBBER CHEM. TECHNOL. 36, 1497 (1963).
14. J. L. Bolland, Quart. Rev., Chem. Soc. 3, 1 (1949).
15. J. R. Shelton and D. N. Vincent, J. Am. Chem. Soc. 85, 2433 (1963).
16. L. Bateman, M. Cain, T. Colclough, and J. I. Cunneen, J. Chem. Soc. 3570 (1962).
17. J. T. Blake and P. L. Bruce, Ind. Eng. Chem. 33, 1198 (1941).
18. J. R. Shelton, RUBBER CHEM. TECHNOL. 30, 1270 (1957).
19. W. L. Hawkins and M. A. Worthington, J. Polym Sci., A, Polym. Chem. 1, 3489 (1963).
20. J. R. Shelton, J. Appl. Polym. Sci. 2, 345 (1959).
21. J. S. Dick, "Rubber Technology: Compounding and Testing for Performance," Hanser Publishers, (2001) p. 453.
22. R. P. Brown, M. J. Forrest and G. Soulagnet, Rapra Review Reports 10, No. 2 (2000).
23. A. N. Gent, J. Appl. Polym. Sci. 6, 497 (1962).
24. D. J. Burlett, RUBBER CHEM. TECHNOL. 72, 165 (1999).
25. N. C. Billingham, D. C. Bott, and A. S. Manke, "Applied Science Publishers," London, (1981) ch. 3.
26. D. I. Marshall, E. George, J. M. Turnipseed, and J. L. Glenn, Polym. Eng. Sci. 13, 415 (1973).
27. H. E. Bair, Polym. Eng. Sci. 13, 435 (1973).
28. D. D. Parker, J. L. Koenig, ACS, Poly. Mat. Sci and Eng. 76, Conference proceedings, (1997) p.193.
29. K. Kaluder, M. Andreis, T. Marinovic, Z. Veksli, J. Elastomers Plast. 29 (4), 270 (1997).
30. G. N. Ghebremeskel, J. K. Sekinger, J. L. Hoffpauir, C. Hendrix, RUBBER CHEM. TECHNOL. 69, 874 (1996).
31. H. Lavabratt, E. Ostman, S. Persson, B. Stenberg, A. B. Skega, J. Appl. Polym. Sci. 44 (1), 83 (1992).
32. D. K. Setua, Polym. Degrad. Stab. 12 (2), 169 (1985).
33. P. S. Bailey, "Ozonation in Organic Chemistry," 39 (1), 3 (1978).
34. Thomson, J. Soc. Chem. Ind. 4, 710 (1885).
35. N. A. Shepard, S. Krall, H. L. Morris, Ind. Eng. Chem. 18, 615 (1926).
36. Williams, Ind. Eng. Chem. 18, 367 (1926).
37. C. Fabry, H. Buisson, J. Phys. Radium 2 (6), 197 (1921).
38. C. Fabry, H. Buisson, Compt. Rend. 192, 457 (1931).
39. A. van Rossem, H.W. Talen, Kautschuk 7, 115 (1931).
40. C. Dufraisse, RUBBER CHEM. TECHNOL. 6, 157 (1933).
41. J. H. Seinfeld, Science 243, 745 (1989).
42. D. Bruck, Kautsch. Gummi. Kunstst. 42 (9), 76 (1989).
43. A. J. Haagen-Smit, M. F. Brunelle, and J. W. Haagen-Smit, RUBBER CHEM. TECHNOL. 32, 1134 (1959).
44. Y. Saito, Nippon Gomu Kyokaishi 5, 284 (1995).
45. D. Bruck, H. Konigshofen, and L. Ruetz, RUBBER CHEM. TECHNOL. 58, 728 (1985).
46. P. S. Bailey, "Ozonation in Organic Chemistry," Volume I, (1978) p. 25.
47. K. W. Ho, J. Polym. Sci. 24, 2467 (1986).
48. S. D. Razumovskii, V. V. Podmasteriev, G. E. Zaikov, Polym. Degrad. Stab. 20, 37 (1988).
49. D. Barnard, J. Chem. Soc., 4547 (1957).
50. F. R. Erickson, R. A. Berntsen, E. L. Hill, and P. Kusy, RUBBER CHEM. TECHNOL. 32, 1062 (1959).
51. E. H. Andrews, M. Braden, J. Polym. Sci. 55, 787 (1961).
52. th Conf., T.H. Messenger, Ed., Instit. Rubber Ind., London, (1963) p. 696.
53. M. Braden, A. N. Gent, J. Appl. Polym. Sci. 3, 90 (1960).
54. M. Braden, A. N. Gent, RUBBER CHEM. TECHNOL. 35, 200 (1962).
55. A. Cottin, G. Peyron, WO 200123464-A1, Michelin, (2001).
56. F. Cataldo, Poly. Degrad. Stab. 72, 287 (2001).
57. D. A. Lederer, M. Path, RUBBER CHEM. TECHNOL. 54, 415 (1981).
58. E. H. Andrews, J. Appl. Polym. Sci. 10, 47 (1966).
59. E. Z. Levit, T. E. Ognevskaya, B. N. Dedusenko, D. B. Boguslovskii, Kauch. Rezina 5, 14 (1979).
60. S. D. Razumovskii, L. S. Batashova, RUBBER CHEM. TECHNOL. 43, 1340 (1970).
61. M. Braden, J. Appl. Polym. Sci. 6, 86 (1962).
62. H. W. Engels, H. Hammer, D. Brück, W. Redetzky, RUBBER CHEM. TECHNOL. 62, 609 (1989).
63. W. Hofmann, "Rubber Technology Handbook," Hanser Publishers (1989) p.273.
64. J. C. Andries, C. K. Rhee, R. W. Smith, D. B. Ross, H. E. Diem, RUBBER CHEM. TECHNOL. 52, 823 (1979).
65. P. M. Lewes, Polym. Degrad. Stab. 15, 33 (1986).
66. E. H. Andrews and M. Braden, J. Appl. Polym. Sci. 7, 1003 (1963).
67. P. M. Mavrina, L. G. Angert, I. G. Anisimov, A. V. Melikova, Soviet Rubber Technology 31 (12), 18 (1972).
68. R. P. Latimer, E. R. Hooser, R. W. Layer, C. K. Rhee, RUBBER CHEM. TECHNOL. 53, 1170 (1980).
69. R. P. Latimer, E. R. Hooser, R. W. Layer, C. K. Rhee, RUBBER CHEM. TECHNOL. 56, 431 (1983).
70. S. W. Hong, C-Y. Lin, Rubber World, p. 36 (August 2000).
71. th Conference, Chicago, IL, Paper No. 65 (April 13-16, 1999).
72. ISO 1431-1 '89, "Resistance to Ozone Under Static Strain" (1989).
73. ISO 1431-2 '82, "Resistance to Ozone Under Dynamic Strain" (1982).
74. M. P. Anachkov, S. K. Rakovsky, S. D. Razumovskii, Int. J. Polym. Mater. 14, 79 (1990).
75. S. M. Kavun, Yu. M. Genkina, V. S. Filippov, Kauch. Rezina 6, 10 (1995).
76. P. Lehocky, L. Syrovy, S. M. Kavun, RubberChem'01, Brussels, Paper 18 (2001).
77. H. S. Dweik and G. Scott, RUBBER CHEM. TECHNOL. 57, 735, (1984).
78. S. W. Hong, Elastomer 34 (2), 156 (1999).
79. U.S. Food and Drug Administration, Code of Federal Regulations 21 (1995).
80. G. Scott, ACS Symposium Series, 280 (P. Klemschuk, ed.), ACS Washington DC, (1985) p. 173.
81. R. K. Kimwomi, G. Kossmehl, E. B. Zeinalov, P. M. Gitu, B. P. Bhatt, Macromol. Chem. Phys. 202 (13), 2790 (2001).
82. S. Avirah, M. I. Geetha, R. J. Cochin, Kottayam, Kautsch. Gummi Kunstst. 49 (12), 831 (1996).
83. F. Ignatz-Hoover, O. Maender, R. Lohr, Rubber World 218 (2), 38 (1998).
84. A. Meghea, M. Giurginca, Polym. Degrad. Stab. 73, 481 (2001).
85. R. L. Gray, R. E. Lee, C. Neri, Polyolefins X, Int. Conf. (1997) p. 599.
86. E. Roos (To Bayer AG), U.S. 3, 211, 793 (1965).
87. J. J. D'Amico and S. T. Webster (to Monsanto Co.), U.S. 3, 668, 245 (1972).
88. M. E. Cain, G. T. Knight, P. M. Lewis, B. Saville, J. Rubber Res. Inst. Malaysia 22, 289 (1969).
89. K. W. Sirimevan Kularatne, G. Scott, Eur. Poly. J. 4, 835 (1978).
90. S. Avirah, R. Joseph, Angew. Makromol. Chem. 1, 193 (1991).
91. F. Gratani, MBS conference, Zurich, (Oct. 1993).
92. K. L. Rollick, J. G. Gillick, J. L. Bush, J. A. Kuczkowski, paper 52, ACS, Cincinnati, Ohio (Oct. 18-21, 1988).
93. K. Fujiwara and T. Ueno, Int. Polym. Sci. Technol. 18, 36 (1991).
94. K. L. Rollick, J. G. Gillick, J. A. Kuczkowski (to The Goodyear Tire & Rubber Co.), U.S. 5,019,611 (May 28, 1991).
95. G. Ivan, M. Giurginca, J.M. Herdan, Int. J. Polym. Mater. 18, 87 (1992).
96. E. L. Wheeler, paper 73, ACS, Detroit, Michigan (Oct. 17-20, 1989).
97. S. W. Hong, paper 72, ACS, Detroit, Michigan (Oct. 17-20, 1989).
98. D. A. Birdsall, S. W. Hong, D. j. Hajdasz, Tyretech '91 Conf. Proc., Berlin, Germany (Oct. 24-25, 1991) p. 108.
99. S. W. Hong, M. P. Ferrandio, ACS, Cleveland Ohio (Oct. 1997).
100. M. Ogawa, Y. Shiomura, T. Takizawa (to Bridgestone Corporation), U.S. 4,801,641 (Jan. 31, 1989).
101. M. Ogawa, Y. Shiomura, T. Takizawa (to Bridgestone Corporation), U.S. 4,886,850 (Dec. 12, 1989).
102. S. W. Hong, Rubber Plast. News, p. 14 (December 25, 1989).
103. A. J. M. Sumner, H. Fries, Kautsch. Gummi Kunstst. 45, 558 (1992).
104. G. W. Marwede, B. Stollfuss, A. J. M. Sumner, Kautsch. Gummi Kunstst. 46, 380 (1993).
105. G. W. Marwede, B. Stollfuss, A. J. M. Sumner, Plasti. Rubber Weekly 1471, 10 (Feb. 1993).
106. W. Hellens, paper 23, ACS, Nashville (Nov. 3-6, 1992).
107. A. J. M. Sumner, H. Fries, Tyretech '91, Berlin (Oct. 24-25, 1991) p. 102.
108. A.J.M. Sumner, paper 37, ACS, Detroit, Michigan (Oct. 17-20, 1989).
109. W. Hellens, paper 40, ACS, Detroit, Michigan (Oct. 17-20, 1989).
110. W. Hellens, D. C. Edwards, Z. J. Lobos, Rubber Plastic News, p. 61 (Oct. 1, 1990).
111. J. R. Dunn, D. C. Edwards, Industria della Gomma, 30 (1), 18 (1986).
112. W. Hellens, S. A. H. Mohammed, R. Hallman, to Polysar Ltd., US 4,645,793 (Feb. 24, 1987).
113. D. C. Edwards, J. A. Crossman, to Polysar Ltd., US 4,588,780 (May 13, 1986).
114. G. C. Blackshaw, I. M. Kristensen, J. Elastomers Plast. 7 (3), 215 (1975).
115. W. Warrach, D. Tsou, Rubber Plast. News, p. 18 (June 4, 1984).
116. R. N. Datta, F. Ignatz-Hoover, P. Ebell, Kautschukchemikalien, GAK 7/ 2000 - Jahrgang 53.
117. F. Ignatz-Hoover, R. N. Datta, Rubber World, p. 43 (August 2000).
118. R. N. Datta, N. M. Huntink, A. G. Talma, paper #14A, presented at the ITEC'02.
119. R. N. Datta, A. G. Talma (to Flexsys), WO 01/68761 A1 (2001).