Short Twaron aramid fiber reinforced thermoplastic polyurethane

Polymers for Advanced Technologies

Volumn 19, Issue 12, 2008, Pages 1894-1900

  Akbarian, M ^a   Hassanzadeh, S ^a   Moghri, M ^b  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

^b ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

Aramid fiber; Polyurethane; Properties

Indexed keywords

ARAMID FIBER; DYNAMIC MECHANICALS; ELONGATION AT BREAKS; FIBER CONTENTS; FIBER LOADINGS; FIBER-MATRIX INTERACTIONS; FRACTURE SURFACES; GOOD CORRELATIONS; INTERFACIAL ADHESIONS; LOSS TANGENTS; MATRIXES; MODES OF FAILURES; MODULUS DATUM; POWER-LAW BEHAVIORS; PROPERTIES; RHEOLOGICAL BEHAVIORS; RHEOLOGICAL STUDIES; SEM; STORAGE MODULUS; THEORETICAL MODELS;

CARBON FIBER REINFORCED PLASTICS; ELASTIC MODULI; FAILURE ANALYSIS; FIBER REINFORCED PLASTICS; FRACTURE; POLYMERS; RHEOLOGY; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; TEXTILE FIBERS; THERMOPLASTICS; WEAR RESISTANCE;

REINFORCED PLASTICS;

ABRASION RESISTANCE; ARAMIDE FIBERS; CARBON FIBERS; ELASTIC STRENGTH; FAILURE; FRACTURE; POLYURETHANES; REINFORCED PLASTIC; RHEOLOGY; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; TEXTILE FIBERS; THERMOPLASTICS;

ARAMID FIBER; COMPOSITE; ELASTIC MODULUS; POLYURETHANE FIBER; RHEOLOGY; TENSILE PROPERTY; THERMOPLASTIC POLYMER;

EID: 64149091319     PISSN: 10427147     EISSN: 10991581     Source Type: Journal    
DOI: 10.1002/pat.1225     Document Type: Article

References (37)

1. Vaughan DJ. The use of coupling agents to enhance the performance of aramid reinforced composites. Polym. Eng. Sci. 1978; 18: 167-169.
2. Timm DC, Ayroninde AJ, Lee CH, Steele LF, Plass NC. Kevlar 49 composite performance: Dependence on thermoset resin microstructure. Polym. Eng. Sci. 1984; 24: 930-935. DOI: 10.1002/pen. 760241113
3. Matienzo LJ, Shah TK, Venables JD. Simultaneous determination of aramid fiber and polymeric matrices in advanced composites. J. Mater. Sci. Lett. 1985; 4: 1519-1521. DOI: 10.1007/BF00721383
4. Blumentritt BF, Vu BT, Cooper SL. The mechanical properties of oriented discontinuous fiber-reinforced thermoplastics. I: Unidirectional fiber orientation. Polym. Eng. Sci. 1974; 14: 633-640. DOI: 10.1002/pen. 760140908
5. Blumentritt BF, Vu BT, Cooper SL. Mechanical properties of discontinuous fiber reinforced thermoplastics. II: Randomin-plane fiber orientation. Polym. Eng. Sci. 1975; 15: 428-436. DOI: 10.1002/pen. 760150606
6. Eagles DB, Blumentritt BF, Cooper SL. Interfacial properties of Kevlar 49 fiber-reinforced thermoplastics. J. Appl. Polym. Sci. 1976; 20: 435-448. DOI: 10.1002/app. 1976.070200216
7. Foldi A. Reinforcement of rubber through short individual filaments. Rubber Chem. Technol. 1976; 49: 379-384.
8. Kutty SKN, Nando GB. Stress relaxation behavior of short Kevlar fiber-reinforced thermoplastic polyurethane. J. Appl. Polym. Sci. 1991; 42: 1835-1844.
9. Kutty SKN, Nando GB. Short Kevlar fiber-thermoplastic polyurethane composite. J. Appl. Polym. Sci. 1991; 43: 1913-1923.
10. Kutty SKN, De PP, Nando GB. Rheology of short Kevlar fiber-reinforced thermoplastic. Plast. Rubber Compos. Process. Appl. 1991; 15: 23-29.
11. Kutty SKN, Nando GB. Effect of processing parameters on the mechanical properties of short Kevlar aramid fiber-thermoplastic polyurethane composite. Plast. Rubber Compos. Process. Appl. 1993; 19: 105-110.
12. Andreopoulos AG, Konstandinidou AV, Petsalas HJ. Elastomeric polyurethanes reinforced with aramid fibers. J. Appl. Polym. Sci. 1989; 38: 2073-2078.
13. Weber ME, Kamal MR. Mechanical and microscopic investigation of whisker-reinforced silicone rubber. Polym. Compos. 1992; 13: 133-145.
14. Marikanadan KC, Diwan SM, Sabo T. Tensile properties of short sisal fiber reinforced polystyrene composites. J. Appl. Polym. Sci. 1996; 60: 1483-1497.
15. Jana PB, De SK. Short carbon fiber filled polychloroprene. Plast. Rubber Compos. Process. Appl. 1992; 17: 43-49.
16. Goyert W, Hespe H. Thermoplastic polyurethane elastomers-properties and applications. Kunststoffe 1978; 68: 819-825.
17. Setua D, De S. Short silk fiber reinforced natural rubber composites. Rubber Chem. Technol. 1983; 56: 808-826.
18. Murty VM, De SK. Effect of particulate fillers on short jute fiber-reinforced natural rubber composites. J. Appl. Polym. Sci. 1982; 27: 4611-4622. DOI: 10.1002/app. 070271208
19. Campbell JM. Short fiber reinforcement of rubber. Prog. Rubber Technol. 1978; 41: 43-60.
20. Coran AY, Boustany K, Hamed P. Short-fiber-rubber composites: The properties of oriented cellulose fiber-elastomer composites. Rubber Chem. Technol. 1974; 47: 394-410.
21. Voet A, Morawski J. Adaptation of the rheovibron to the measurement of dynamic properties of vulcanisates at elongations up to sample rupture. Rubber Chem. Technol. 1974; 47: 758-764.
22. Basu D, Benerjee AN, Misra A. Comparative rheological studies on jute-fiber-and glass-fiber-filled polypropylene composite melts. J. Appl. Polym. Sci. 1992; 46: 1999-2009.
23. Maiti SN, Hassan MR. Melt rheological properties of polypropylene-wood flour composites. J. Appl. Polym. Sci. 1989; 37: 2019-2032. DOI: 10.1002/app. 1989.070370721
24. Czarnecki L, White JL. Shear flow rheological properties, fiber damage, and mastication characteristics of aramid-,glass-, and cellulose-fiber reinforced polystyrene melts. J. Appl. Polym. Sci. 1980; 25: 1217-1244. DOI: 10.1002/app. 1980. 070250623
25. Han CD. Rheological properties of calcium carbonate-filled polypropylene melts. J. Appl. Polym. Sci. 1974; 18: 821-829. DOI: 10.1002/app.1974.070180317
26. Wilson KR, Frances A. Elastomers reinforced with short Kevlar aramid fiber forwear applications. Rubber World 1988; 198: 20-23.
27. Tsai SW, Pagano NJ. Invariant properties of composite materials. In: Composite Materials Workshop, Tsai SW, Halpin JC, Pagano NJ (eds). Technomic: Stamford, CT. 1968, pp 233-253.
28. Tsai SW. Mechanics of Composite Materials. Report AFML-TR-66-149, 1966.
29. Lavengood RE, Goettler RE. US Department of Commerce Report AD 886372, 1971.
30. Nicolais L. Mechanics of composites. Polym. Eng. Sci. 1975; 15: 137-149. DOI: 10.1002/pen. 760150305
31. Halpin JC, Krados JL. The Halpin-Tsai equations: A review. Polym. Eng. Sci. 1976; 16: 344-352.
32. Nielsen LE. Mechanical Properties of Polymers and Composites, vol. 2. Marcel Dekker: New York, 1974.
33. Nielsen LE. Morphology and the elastic modulus of block polymers and polyblends. Rheol. Acta 1974; 13: 86-92. DOI: 10.1007/ BF01526889
34. Anderson RM, Lavengood RE. Variables affecting strength and modulus of short fiber composites. Soc. Plast. Eng. J. 1968; 24: 20-26.
35. Lees JK. A study of the tensile modulus of short fiber reinforced plastics. Polym. Eng. Sci. 1968; 8: 186-194.
36. Noga EA, Woodhams RT. Asbestos-reinforced thermoplastics. Soc. Plast. Eng. J. 1970; 26: 23-28.
37. Bernardo AC. How to get more from glass-fiber-reinforced HDPE. Soc. Plast. Eng. J. 1970; 26: 39-45.