Experimental and numerical determination of the hygroscopic warping of cross-laminated solid wood panels

Holzforschung

Volumn 63, Issue 3, 2009, Pages 340-347

  Gereke, Thomas ^a   Gustafsson, Per Johan ^b   Persson, Kent ^b   Niemz, Peter ^a  

^a ETH ZURICH   (Switzerland)

^b LUND UNIVERSITY   (Sweden)

Author keywords

Adhesive joint; Cross lamination; Cup; Moisture; Panel; Spruce (Picea abies); Warp

Indexed keywords

CROSS-LAMINATION; CUP; PANEL; SPRUCE (PICEA ABIES); WARP;

ADHESIVE JOINTS; ATMOSPHERIC HUMIDITY; BOND (MASONRY); COMPUTER SIMULATION; DEFORMATION; LAMINATING; MOISTURE;

WEAVING;

PICEA; PICEA ABIES;

EID: 63849152895     PISSN: 00183830     EISSN: 1437434X     Source Type: Journal    
DOI: 10.1515/HF.2009.061     Document Type: Article

References (30)

1. Bader, H., Niemz, P., Sonderegger, W. (2007) Investigation on the influence of the panel composition on selected properties of three-layer solid wood panels. Holz RohWerkst. 65:173-181.
2. Blass, H.J., Görlacher, R. (2003) Bemessung im Holzbau: Brettsperrholz - Berechnungsgrundlagen. Holzbau Kalender. 2:580-598.
3. Bodig, J., Jayne, B.A. Mechanics of Wood and Wood Composites. Krieger Publishing Company, Malabar, FL, 1993.
4. Czaderski, C., Steiger, R., Howald, M., Olia, S., Gülzow, A., Niemz, P. (2007) Tests and calculations on 3-layered crosslaminated solid wood panels supported at all edges. Holz Roh Werkst. 65:383-402.
5. Dahlblom, O., Persson, K., Petersson, H., Ormarsson, S. (1999) Investigation of variation of engineering properties of spruce. In: Proceedings of the 6th International IUFRO Wood Drying Conference: Wood Drying Research and Technology for Sustainable Forestry beyond 2000, Stellenbosch, South Africa. pp. 253-262.
6. DIN EN ISO 12572. (2001) Hygrothermal performance of building materials and products - Determination of water vapour transmission properties.
7. Donzé, M., Niemz, P., Hurst, A. (2003) Untersuchungen zu Eigenschaften mehrschichtiger Massivholzplatten. Wood Res. 48:27-36.
8. Gereke, T., Schnider, T., Hurst, A., Niemz, P. (2008) Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.). Wood Sci. Technol. Online first: DOI 10.1007/s00226-008-0218-1.
9. Gülzow, A., Gsell, D., Steiger, R. (2008) Non-destructive evaluation of elastic parameters of square-shaped cross-laminated solid wood panels, built up symmetrically with 3 layers. Holz Roh Werkst. 66:19-37.
10. Hanhijärvi, A. (1995) Modelling of creep deformation mechanisms in wood. PhD thesis, Technical Research Centre of Finland, Espoo, Finland.
11. Hukka, A. (1999) The effective diffusion coefficient and mass transfer coefficient of Nordic softwood as calculated from drying measurements. Holzforschung 53:534-540.
12. Jöbstl R.A., Schickhofer, G. (2007) Traglastnachweis für Brettsperrholz auf Basis der starren Verbundtheorie unter Berücksichtigung von Systemeffekten. In: Proceedings of the 39 Fortbildungskurs SAH "Praktische Anwendung von Massivholzplatten", Weinfelden, Switzerland. pp. 9-23.
13. Keunecke, D., Hering, S., Niemz, P. (2008) Three-dimensional elastic behaviour of common yew and Norway spruce.Wood Sci. Technol. 42:633-647.
14. Konnerth, J., Jäger, A., Eberhardsteiner, J., Müller, U., Gindl, W. (2006) Elastic properties of adhesive polymers. II. Polymer films and bond lines by means of nanoindentation. J. Appl. Polym. Sci. 102:1234-1239.
15. Konnerth, J., Gindl, W., Müller, U. (2007) Elastic properties of adhesive polymers. Part I: polymer films by means of electronic speckle pattern interferometry. J. Appl. Polym. Sci. 103:3936-3939.
16. Leicester, R.M. (1971) A rheological model for mechano-sorptive deflections of beams. Wood Sci. Technol. 5:211-220.
17. Mårtensson, A. (1992) Mechanical behaviour of wood exposed to humidity variations. PhD thesis, Lund University, Lund, Sweden.
18. Neuhaus, F.-H. (1981) Elastizitätszahlen von Fichtenholz in Abhängigkeit von der Holzfeuchtigkeit. PhD thesis, Ruhr-University Bochum, Germany.
19. Ormarsson, S. (1999) Numerical analysis of moisture-related distortions in sawn timber. PhD thesis, Chalmers University of Technology, Göteborg, Sweden.
20. Popper, R., Niemz, P., Eberle, G. (2004a) Equilibrium moisture content and swelling of the solid wood panels. Holz Roh Werkst. 62:209-217.
21. Popper, R., Niemz, P., Eberle, G. (2004b) Diffusion processes in multilayer solid wood panels. Holz Roh Werkst. 62:253-260.
22. Ranta-Maunus, A. (1990) Impact of mechano-sorptive creep to the long-term strength of timber. Holz Roh Werkst. 48:67-71.
23. Santaoja, K., Leino, T., Ranta-Maunus, A., Hanhijärvi, A. (1991) Mechano-sorptive structural analysis of wood by the ABAQUS finite element program. Research Notes 1276, Technical Research Center of Finland, Espoo.
24. Sell, J. Eigenschaften und Kenngrössen von Holzarten. Baufachverlag AG, Dietikon, 1997.
25. Siau, J.F. Wood: Influence of Moisture on Physical Properties. Department of Wood Science and Forest Products, Virginia Polytechnic Institute and State University, Blacksburg, USA, 1995.
26. Takemura, T. (1967) Plastic properties of wood in relation to the non equilibrium states of moisture content. Part II. Mokuzai Gakkaishi 13:77-81.
27. Tobisch, S. (2006) Methoden zur Beeinflussung ausgewählter Eigenschaften von dreilagigen Massivholzplatten aus Nadelholz. PhD thesis, University of Hamburg, Germany.
28. Toratti, T. (1992) Creep of timber beams in a variable environment. PhD thesis, Helsinki University of Technology, Finland.
29. Vanek, M., Teischinger, A. (1989) Diffusionskoeffizienten und Diffusionswiderstandszahlen von verschiedenen Holzarten. Holzforsch. Holzverwert. 1:3-6.
30. Wadsö, L. (1994) Describing non-Fickian water-vapour sorption in wood. J. Mater. Sci. 29:2367-2372.