Study of the rheological behavior of an anode slurry and the microstructural properties of an anode functional film obtained by spray coating

Powder Technology

Volumn 192, Issue 3, 2009, Pages 352-358

  Fonseca, C G ^a   Basaglia, R M F ^a   Brant, M C ^a   Matencio, T ^a   Domingues, R Z ^a  

^a Chemistry Department   (Brazil)

Author keywords

Functional anode layer; Rheology; Slurry stability; SOFC; Zeta potential

Indexed keywords

ANODE FUNCTIONAL LAYERS; ANODE SUBSTRATES; FREE OF CRACKS; FUNCTIONAL ANODE LAYER; FUNCTIONAL FILMS; MICROSTRUCTURAL PROPERTIES; ORGANIC ADDITIVES; POLYMETHYLMETHACRYLATE; PSEUDOPLASTIC; RHEOLOGICAL BEHAVIORS; RHEOLOGICAL MEASUREMENTS; SLURRY STABILITY; SOFC; SPRAY COATINGS; TAPE CASTINGS; THIXOTROPIC BEHAVIORS;

CHEMICAL STABILITY; ELASTICITY; PHOTORESISTS; PLASTICITY; RHEOLOGY; SOLID OXIDE FUEL CELLS (SOFC); VISCOSITY; ZETA POTENTIAL;

SLURRIES;

NICKEL; POLY(METHYL METHACRYLATE);

ARTICLE; FILM; FLOW KINETICS; MATERIAL COATING; POWDER; SHEAR RATE; SHEAR STRESS; THERMAL ANALYSIS; VISCOSITY; ZETA POTENTIAL;

EID: 63349099056     PISSN: 00325910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.powtec.2009.01.022     Document Type: Article

References (40)

1. Kim S.D., Lee J.J., Moon H., Hyun S.H., Moon J., Kim J., and Lee H.W. Effects of anode and electrolyte microstructures on performance of solid oxide fuel cells. Journal of Power Sources 169 (2007) 265-270
2. Fukui T., Ohara S., Naito M., and Nogi K. Performance and stability of SOFC anode fabricated from NiO/YSZ composite particles. Journal of the European Ceramic Society 23 15 (2003) 2963-2967
3. Lee J.H., Moon H., Lee H.-W., Kim J., Kim J.-K., and Yoon K.-H. Quantitative analysis of microstructure and its related electrical property of SOFC anode, Ni-YSZ cermet. Solid State Ionics 148 1-2 (2002) 15-26
4. Lee J.-H., Heo J.-W., Lee D.-S., Kim J., Kim G.-H., Lee H.-W., Song H.S., and Moon J.-H. The impact of anode microstructure on the power generating characteristics of SOFC. Solid State Ionics 158 3-4 (2003) 225-232
5. Virkar A.V., Chen J., Tanner C.W., and Kim J.-W. The role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells. Solid State Ionics 131 1-2 (2000) 189-198
6. KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY, J.H. Lee, G. GWANGJIN, High performance anode-supported solid oxide fuel cell, EP 1768208 A2, 14.09.2006, 28.03.2007, AN 06254796.3.
7. 3 in the search for potential SOFC anode materials. Journal of the European ceramic Society 21 10-11 (2001) 1831-1835
8. Tietz F., Dias F.J., Simwonis D., and Stover D. Evaluation of commercial nickel oxide powders for components in solid oxide fuel cells. Journal of the European Ceramic Society 20 8 (2000) 1023-1034
9. Kharton V.V., Naumocich E.N., Tikhonovich V.N., Bashmakov I.A., Boginsky L.S., and Kovalevsky A.V. Testing tubular solid oxide fuel cells in nonsteady-state conditions. Journal of Power Sources 79 2 (1999) 242-249
10. Kong J., Sun K., Zhou D., Zhang N., Mu J., and Qiao J. Ni-YSZ gradient anodes for anode-supported SOFCs. Journal of Power Sources 166 (2007) 337-342
11. Kim S.D., Moon H., Hyuna S.H., Moona J., Kim J., and Lee H.W. Nano-composite materials for high-performance and durability of solid oxide fuel cells. Journal of Power Sources 163 (2006) 392-397
12. Dong D., Gao J., Liu X., and Meng G. Fabrication of tubular NiO/YSZ anode-support of solid oxide fuel cell by gelcasting. Journal of Power Sources 165 (2007) 217-223
13. 2 nano-particles. Materials Science and Engineering A 429 (2006) 266-271
14. Hassan A.E.A., Menzler N.H., Blass G., Ali M.E., Buchkremer H.P., and Stover D. Development of an optimized anode functional layer for solid oxide fuel cell applications. Advanced Engineering Materials 4 3 (2002) 125-129
15. Muller A.C., Krugel A., and Ivers-Tiffée E. Characterization of anode/electrolyte interface for advanced anode structures. International Symposium on Solid Oxide Fuels Cells No. 8 (2003) 680-685
16. Ramanathan S., Kumar K.P.K., De P.K., and Banerjee S. Role of dispersion conditions on grindability of yttria stabilized zirconia (YSZ) powders. Bulletim Materials Science 28 2 (2005) 109-114
17. Ramanathan S., Krishnakumar K.P., De P.K., and Banerjee S. Powder dispersion and aqueous tape casting of YSZ-NiO composite. Journal of Materials Science 39 (2004) 3339-3344
18. Sridhar S., and Pal U.B. Effect of slurry properties on anode cermets for solid oxide fuel cells. Powder Technology 88 (1996) 173-178
19. Esteban S.L., Diaz M., and Moya J.S. Rheology of zirconia/nickel particulate system and microstructure of composites. Composites Science and Technology 67 (2007) 2303-2310
20. Chen H., Yan W., He Y., Ding Y., Zhang L., Tan C., Lapkin A.A., and Bavykin D.V. Heat transfer and flow behaviour of aqueous suspensions of titanate nanotubes (nanofluids). Powder Technology 183 (2008) 63-72
21. Gai G., Yang Y., Jin L., Zou X., and Wu Y. Particle shape modification and related property improvements. Powder Technology 183 (2008) 115-121
22. Lu P., and Zhang M. Rheology of coal-water paste. Powder Technology 150 (2005) 189-195
23. Labanda J., and Llorens J. Improvement of the deflocculating powder of polyacrylates in ceramic slips by small additions of quaternary ammonium salts. Powder Technology 155 (2005) 181-186
24. Lu K. Rheological behavior of carbon nanotube-alumina nanoparticle dispersion systems. Powder Technology 177 (2007) 154-161
25. Olhero S.M., and Ferreira J.M.F. Influence of particle size distribution on rheology and particle packing of silica-based suspensions. Powder Technology 139 (2004) 69-75
26. Song Y.-L., Liu X.-L., Zhang J.-Q., Zou X.-Y., and Chen J.-F. Rheological properties of nanosized barium titanate prepared by HGRP for aqueous tape casting. Powder Technology 155 (2005) 26-32
27. Oliveira I.R., Studart A.R., Pileggi R.G., and Pandolfelli V.C. Dispersão e empacotamento de partículas. Fazendo Arte Editorial, São Paulo (2000) 19-31
28. Barnes H.A. Thixotropy a review. Journal of Non-Newtonian Fluid Mechanics 70 (1997) 1-33
29. Zhang L., Jiang S.P., Wang W., and Zhang Y. NiO/YSZ, anode-supported, thin-electrolyte, solid oxide fuel cells fabricated by gel casting. Journal of Power Sources 170 (2007) 55-60
30. Jian L.X., Ping H.L., Wei S.X., Xin X., Ren F.X., and Chen G.H. Rheological properties of aqueous silicon nitride suspensions. Journal of Materials Science 36 (2001) 3379-3384
31. Burgos G.R., Alexandrou A.N., and Entov V. On the determination of yield surfaces in Herschel-Bulkley fluids. Journal of Rheology 43 3 (1999) 463-483
32. Ma J., Yi Z., Xie Z., Zhoub L., Miao H., Zhang B., and Lin X. Gelcasting of alumina with a mixed PVP-MAM system. Ceramics International 31 (2005) 1015-1019
33. Cerezal P., Castro E., and Duarte G. A research note on rheological behavior of some processed products from cactus pear (Opuntia ficus-indica [L.] Mill). Journal of Texture Studies 38 (2007) 738-754
34. Han K.R., Jeong Y., Lee H., and Kim C. Fabrication of NiO/YSZ anode material for SOFC via mixed NiO precursors. Materials Letters 61 (2007) 1242-1245
35. Beattlie J.K. The intrinsic charge on hydrophobic microfluidic substrates. Lab Chip 6 (2006) 1409-1411
36. Elimelech M., Chen W.H., and Waypa J.J. Measuring the zeta (electrokinetic) potential of reverse osmosis membranes by a streaming potential analyzer. Desalination 95 (1994) 269-286
37. Walker S.L., Bhattacharjee S., Hoed E.M.V., and Elimelech M. A novel asymmetric clamping cell for measuring streaming potential of flat surfaces. Langmuir 18 (2002) 2193-2198
38. Hernandez N., Sanchez-Herencia A.J., and Moreno R. Forming of nickel compacts by a colloidal filtration route. Acta Materialia 53 (2005) 919-925
39. Rao K.H., Forssberg K.S.E., and Forsling W. Interfacial interactions and mechanical properties of mineral filled. Colloids and Surfaces A: Physicochemical and Engineering Aspects 133 (1998) 107-117
40. Zhang Y., Gao J., Peng K., Guangyao M., and Liu X. Dip-coating thin yttria-stabilized zirconia films for solid oxide fuel cell applications. Ceramics International 30 (2004) 1049-1053