Recycling municipal incinerator fly- and scrubber-ash into fused slag for the substantial replacement of cement in cement-mortars

Waste Management

Volumn 29, Issue 6, 2009, Pages 1952-1959

  Lee, Tzen Chin ^a   Rao, Ming Kang ^a  

^a NATIONAL UNITED UNIVERSITY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

BLENDED CEMENTS; CEMENT REPLACEMENTS; COST EFFECTIVES; ENVIRONMENTALLY-FRIENDLY; GLASSY SLAGS; LEACHING PROCEDURES; MUNICIPAL SOLID WASTE INCINERATORS; ORDINARY PORTLAND CEMENT MORTARS; POZZOLANIC REACTIONS; PULVERIZED SLAGS; REGULATORY THRESHOLDS; TOXICITY CHARACTERISTICS; WASTE GLASS; WEIGHT RATIOS;

CEMENT MANUFACTURE; CURING; GLASS; HEAVY METALS; LAND FILL; LEACHING; MORTAR; PLASTER; PORTLAND CEMENT; REFUSE INCINERATORS; SCRUBBERS; SLAGS; SMELTING; SOLID WASTES; TOXICITY; WASTE DISPOSAL; WASTE INCINERATION;

COMPRESSIVE STRENGTH;

CEMENT; HEAVY METAL;

CEMENT; FLY ASH; LEACHING; MUNICIPAL SOLID WASTE; PARTICLE SIZE; RECYCLING; SLAG; WASTE TECHNOLOGY;

ARTICLE; CHEMICAL COMPOSITION; COMPRESSIVE STRENGTH; CONTROLLED STUDY; DIFFERENTIAL SCANNING CALORIMETRY; FEASIBILITY STUDY; FLUIDIZATION; FLY ASH; INFRARED SPECTROSCOPY; LEACHING; MELTING POINT; MUNICIPAL SOLID WASTE; PARTICLE SIZE; PRIORITY JOURNAL; RECYCLING; SAND; SCRUBBER; SLAG;

CARBON; COMPRESSIVE STRENGTH; CONSERVATION OF NATURAL RESOURCES; CONSTRUCTION MATERIALS; DIFFERENTIAL THERMAL ANALYSIS; FEASIBILITY STUDIES; INDUSTRIAL WASTE; PARTICULATE MATTER; POROSITY; RHEOLOGY; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; WASTE MANAGEMENT;

EID: 63149120459     PISSN: 0956053X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wasman.2009.01.002     Document Type: Article

References (26)

1. Al-Rawas A.A., Hago A.W., Taha R., and Al-Kharousi K. Use of incinerator ash as replacement for cement and sand in cement mortars. Building and Environment 40 (2005) 1261-1266
2. Aubert J.E., Husson B., and Sarramone N. Utilization of municipal solid waste incineration (MSWI) fly-ash in blended cement Part 2. Mechanical strength of mortars and environmental impact. Journal of Hazardous Materials 146 (2007) 12-19
3. Beerkens R.G.C. Modular melting part 1. Industrial glassmelting process analysis. American Ceramic Society Bulletin 83 4 (2004) 28-32
4. 2 affect the reaction. Cement and Concrete Research 16 (1986) 246-254
5. Haugsten K.E., and Gustavson B. Environmental properties of vitrified fly ash from hazardous and municipal waste incineration. Waste Management 20 (2000) 167-176
6. Hou, P.C., 2003. Reuse of waste glass powder for substitution of fine aggregate in the recycling asphalt concrete. Master Thesis, National Yunlin University of Science and Technology, Taiwan, Republic of China.
7. Jacott, M., Comunes, F., 2003. Energy use in the cement industry in North America: Emissions, Waste Generation and Pollution Control, 1990-2001' Second North American Symposium on Assessing the Environmental Effects of Trade, May 30.
8. Lee T.C., Wang W.J., and Shih P.Y. Slag-cement mortar made with cement and slag vitrified from MSWI fly-ash/scrubber-ash and glass frit. Construction and Building Materials 22 (2008) 1914-1921
9. Lin K.L., Wang K.S., Tzeng B.Y., and Lin C.Y. The reuse of municipal solid waste incinerator fly-ash slag as a cement substitute. Resources Conservation and Recycling 39 (2003) 315-324
10. Lin K.L., Wang K.S., Lin C.Y., and Lin C.H. The hydration properties of pastes containing municipal solid waste incinerator fly-ash slag. Journal of Hazardous Materials B109 (2004) 173-181
11. Lin K.L., and Chang C.T. Leaching characteristics of slag from the melting treatment of municipal solid waste incinerator ash. Journal of Hazardous Materials B135 (2006) 296-302
12. Lin K.L., and Lin D.F. Hydration characteristics of municipal solid waste incinerator bottom ash slag as a pozzolanic material for use in cement. Cement and Concrete Composites 28 (2006) 817-823
13. Lin K.L., Chang W.C., and Lin D.F. Pozzolanic characteristics of pulverized incinerator bottom ash slag. Construction and Building Materials 22 (2008) 324-329
14. 2 hybrids prepared by sol-gel processing: effect of CaO and PTMO contents. Biomaterials 23 (2002) 3033-3040
15. Mollah M.Y.A., Lu F., and Cocke D.L. An X-ray diffraction (XRD) and Fourier transform infrared spectroscopic (FT-IR) characterization of the speciation of arsenic (V) in Portland cement type-V. The Science of the Total Environment 224 (1998) 57-68
16. Mollah M.Y.A., Palta P., Hess T.R., Vempati R.K., and Cocke D.L. Chemical and physical effects of sodium lignosulfonate superplasticizer on the hydration of Portland cement and soldifcation/stabilization consequences. Cement and Concrete Research 25 3 (1995) 671-682
17. Mulder E. Pre-treament of MSWI fly-ash for useful application. Waste Management 16 1-3 (1996) 181-184
18. Nemec L. Energy consumption in the glass melting process. II: Results of calculations. Glass Science and Technology 68 (1995) 39-50
19. Nishigaki M. Producing permeable blocks and pavement bricks from molten slag. Waste Management 20 (2000) 185-192
20. Odler I., and Robler M. Investigations on the relationship between porosity, structure and strength of hydrated Portland cement paste (II). Effect of pore structure and of degree of hydration. Cement and Concrete Research 15 (1985) 401-410
21. Puertas F., Martinez-Ramirez S., Alonso S., and Vazquez T. Alkali-activated fly-ash/slag-cement strength behavior and hydration products. Cement and Concrete Research 30 (2000) 1625-1632
22. Shao Y., Lefort T., Moras S., and Rodriguez D. Studies on concrete containing ground waste glass. Cement and Concrete Research 30 (2000) 91-100
23. Sreenivasarao K., Warren G.W., Mckinley M.D., and Gao G. Hydometallurgical treatment of municipal solid waste fly-ash for simultaneous detoxification and metal recovery. Journal of Environment Science Health A 32 4 (1997) 1225-1245
24. Svensson M., Berg M., Ifwer K., Sjoblom R., and Ecke H. The effect of isosaccharinic acid (ISA) on the mobilization of metals in municipal solid waste incineration (MSWI) dry scrubber residue. Journal of Hazardous Materials 144 (2007) 477-484
25. Van Herck P., Van der Bruggen B., Vogels G., and Vandecasteele C. Application of computer modelling to predict the leaching behavior of heavy metals from MSWI fly-ash and comparison with a sequential extraction method. Waste Management 20 (2000) 203-210
26. Wang K.S., Lin K.L., and Tzeng B.Y. Latent hydraulic reactivity of blended cement incorporating slag made from municipal solid waste incinerator fly-ash. Journal of Air and Waste Management Association 53 (2003) 1340-1346