HID lamp electronic ballast with reduced component number

IEEE Transactions on Industrial Electronics

Volumn 56, Issue 3, 2009, Pages 718-725

  Orletti, Renato ^a   Có, Márcio Almeida ^b,c   Simonetti, Domingos Sávio Lyrio ^d   Vieira, José Luiz de Freitas ^d  

^a PETROBRAS   (Brazil)

^b UNIVIX   (Brazil)

^c Federal Institute of Espírito Santo   (Brazil)

^d FEDERAL UNIVERSITY OF ESPÍRITO SANTO   (Brazil)

Author keywords

Acoustic resonance; Ballast; Lamps; Lighting; Low frequency square wave converter

Indexed keywords

ACOUSTICS; BALLASTS (LAMP); ELECTRIC CONVERTERS; ELECTRIC LAMPS; ELECTRIC POWER FACTOR CORRECTION; RESONANCE; SODIUM;

ACOUSTIC RESONANCE; BALLAST; BOOST CONVERTERS; DC CONVERTERS; DC-DC BUCK CONVERTERS; DISCONTINUOUS CONDUCTION MODES; ELECTRONIC BALLASTS; HID LAMPS; HIGH-INTENSITY DISCHARGE LAMPS; LAMPS; LOW-FREQUENCY SQUARE-WAVE CONVERTER; MICRO CONTROLLERS; POWER FACTOR PREREGULATOR; POWER STAGES; SINGLE STAGES; SODIUM VAPOR LAMPS; SQUARE-WAVE CURRENTS; TOTAL HARMONIC DISTORTIONS;

LIGHTING;

EID: 63149107946     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2008.2011599     Document Type: Conference Paper

References (33)

1. H. J. Faehrich and E. Rasch, "Electronic ballast for metal halide lamp," J. Illum. Eng. Soc., pp. 131-140, Summer 1988.
2. G. Zaslavsky, S. Cohen, and W. Keeffe, "Improved starting of the 100 W metal halide lamp," J. Illum. Eng. Soc., pp. 76-83, Summer 1990.
3. J. M. A. Alvarez, "Alimentación de lámparas de alta intensidad de descarga: Aportaciones en la optimización del sistema electrónico," Universidad de Oviedo, Gijon, Oviedo, Spain, Sep. 1994.
4. W. W. Byszewski, A. B. Budinger, and Y. M. Li, "HID starting: Glow discharge and transition to the thermionic arc," J. Illum. Eng. Soc. pp. 3-9, Summer 1991.
5. N. Fukumori, H. Nishimura, K. Uchihashi, and M. Fukura, "A study of HID lamp life when operated by electronic ballast," J. Illum. Eng. Soc. pp. 41-47, Winter 1995.
6. W. Kaiser, "Hybrid electronic ballast operating the HPS lamp at constant power," in Conf. Rec. IEEE IAS Annu. Meeting, 1996, pp. 2103-2108.
7. E. Rasch and E. Statnic, "Behavior of metal halide lamps with conventional and electronic ballasts," J. Illum. Eng. Soc., pp. 88-96, Summer 1991.
8. R. Redl and J. D. Paul, "A new high-frequency and high-efficiency electronic ballast for HID lamps: Topology, analysis, design, and experimental results," in Proc. IEEE APEC, 1999, vol. 1, pp. 486-492.
9. B-R. Lin and Y-C. Hsieh, "Dimming control for high intensity discharge lamp with power factor correction," in Proc. EPE, 1999, pp. 1-8.
10. H. Ohguchi, M. H. Ohsato, T. Shimizu, G. Kimura, and H. Takagi, "A high-frequency electronic ballast for HID lamps based on a λ/4-long distributed constant line," IEEE Trans. Power Electron., vol. 13, no. 6, pp. 1023-1029, Nov. 1998.
11. H. Peng, S. Ratanapanachote, P. Enjeti, L. Laskai, and I. Pitel, "Evaluation of acoustic resonance in metal halide (MH) lamps and an approach to detect its occurrence," in Conf. Rec. IEEE IAS Annu. Meeting, 1997, pp. 2276-2283.
12. S. Wada, "Study of HID lamp with reduced acoustic resonance's," J. IES, vol. 10, no. 1, pp. 162-175, Winter 1987.
13. J. M. Alonso, C. Blanco, E. Lopez, A. J. Calleja, and M. Rico-Secades, "Analysis, design, and optimization of the LCC resonant inverter as a high-intensity discharge lamp ballast," IEEE Trans. Power Electron. vol. 13, no. 3, pp. 573-585, May 1998.
14. M. Gulko, D. Medini, and S. Ben-Yaakov, "Inductor-controlled current-sourcing resonant inverter and its application as a high pressure discharge lamp driver," in Proc. IEEE APEC, 1994, pp. 434-440.
15. S. Ben-Yaakov and M. Gulko, "Design and performance of an electronic ballast for high-pressure sodium (HPS) lamps," in Proc. IEEE APEC 1995, pp. 665-669.
16. P. Enjeti, L. Laskai, and I. Pitel, "A unity power factor electronic ballast for metal halide lamps," in Proc. IEEE APEC, 1994, pp. 31-37.
17. H. Nishimura, H. Nagase, K. Uchihashi, T. Shiomi, and M. Fukuhara, "A new electronic ballast for HID lamps," J. Illum. Eng. Soc., pp. 70-76, Summer 1988.
18. H.-J. Chiu, T.-H. Song, S.-J. Cheng, C.-H. Li, and Y.-K. Lo, "Design and implementation of a single-stage high-frequency HID lamp electronic ballast," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 674-683, Feb. 2008.
19. C.-S. Moo, C.-K. Huang, and C.-Y. Yang, "Acoustic-resonance-free high-frequency electronic ballast for metal halide lamps," IEEE Trans. Ind. Electron., vol. 55, no. 10, pp. 3653-3660, Oct. 2008.
20. T. Yamauchi and T. Shiomi, "A novel charge pump power factor correction electronic ballast for high intensity discharge lamps," in Proc. IEEE Power Electron. Spec. Conf., 1998, pp. 1761-1767.
21. J. M. Alonso, M. A. Dalla Costa, and C. Ordiz, "Integrated buck-flyback converter as a high-power-factor off-line power supply," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1090-1100, Mar. 2008.
22. F. J. Diaz, F. J. Azcondo, R. Casanueva, C. Branas, and R. Zane, "Digital control of a low-frequency square-wave electronic ballast with resonant ignition," IEEE Trans. Ind. Electron., vol. 55, no. 9, pp. 3180-3191, Sep. 2008.
23. T. B. Marchesan, M. A. Dalla-Costa, J. M. Alonso, and R. N. do Prado, "Integrated zeta-flyback electronic ballast to supply high-intensity discharge lamps," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2918-2921, Oct. 2007.
24. M. A. Dalla Costa, J. M. Alonso, J. C. Miranda, J. Garcia, and D. G. Lamar, "A single-stage high-power-factor electronic ballast based on integrated buck flyback converter to supply metal halide lamps," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1112-1122, Mar. 2008.
25. M. A. Có, C. Z. Resende, D. S. L. Simonetti, J. L. F. Vieira, and P. C. A. Almeida, "Microcontrolled electronic gear for low wattage metal halide (MH) and high-pressure sodium (HPS) lamps," in Conf. Rec. IEEE IAS Annu. Meeting, 2002, vol. 3, pp. 1863-1868.
26. D. H. J. van Casteren, M. A. M. Hendrix, and J. L. Duarte, "Controlled HID lamp-ballast interaction for low-frequency square-wave drivers," IEEE Trans. Power Electron., vol. 22, no. 3, pp. 854-862, May 2007.
27. C.-M. Huang, T.-J. Liang, R.-L. Lin, and J.-F. Chen, "A novel constant power control circuit for HID electronic ballast," IEEE Trans. Power Electron., vol. 22, no. 3, pp. 780-788, May 2007.
28. M. Shen, Z. Quian, and F. Z. Peng, "A novel two-stage acoustic resonance free electronic ballast for HID lamps," in Conf. Rec. IEEE IAS Annu. Meeting, 2002, pp. 1869-1874.
29. M. Rico-Secades, E. L. Corominas, J. M. Alonso, J. Ribas, J. Cardesín, A. Calleja, and J. García, "Complete low-cost two-stage electronic ballast for 70-W high-pressure sodium vapor lamp based on current-mode-controlled buck-boost inverter," IEEE Trans. Ind. Appl. vol. 41, no. 3, pp. 728-734, May/Jun. 2005.
30. H. Li, M. Shen, Y. Jiang, and Z. Qian, "A novel low-frequency electronic ballast for HID lamps," IEEE Trans. Ind. Appl., vol. 41, no. 5, pp. 1401-1408, Sep./Oct. 2005.
31. M. A. Johnston and R. W. Erickson, "Reduction of voltage stress in the full bridge BIBRED by duty ratio and phase shift control," in Proc. IEEE APEC, 1994, vol. 2, pp. 849-855.
32. M. Brumatti, M. A. Có, D. S. L. Simonetti, and J. L. F. Vieira, "Single stage electronic ballast for HID lamps," in Conf. Rec. IEEE IAS Annu. Meeting, 2003, vol. 1, pp. 339-344.
33. K. H. Liu and Y. L. Lin, "Current waveform distortion in power factor correction circuits employing discontinuous mode boost converter," in Proc. IEEE PESC, 1989, pp. 825-829.