Numerical investigation of the stress state in inclined backfilled stopes

International Journal of Geomechanics

Volumn 9, Issue 2, 2009, Pages 52-62

  Li, Li ^a   Aubertin, Michel ^b  

^a ÉCOLE POLYTECHNIQUE DE MONTRÉAL   (Canada)

^b Université Laval   (Canada)

Author keywords

Backfills; Earth pressure; Numerical models; Stress

Indexed keywords

NUMERICAL METHODS; NUMERICAL MODELS; SHEAR STRENGTH; STRESSES;

ANALYTICAL INVESTIGATIONS; BACKFILLS; DISTRIBUTION PATTERNS; EARTH PRESSURE; INFLUENTIAL FACTORS; NUMERICAL INVESTIGATIONS; PARTICULATE MATERIALS; SHEAR STRENGTH PARAMETERS;

STOPING;

BACKFILL; CONSOLIDATION; EARTH PRESSURE; MINING; NUMERICAL MODEL; POISSON RATIO; SHEAR STRENGTH; UNDERGROUND STORAGE;

EID: 63049119758     PISSN: 15323641     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1532-3641(2009)9:2(52)     Document Type: Article

References (50)

1. Aubertin, M. (1999). "Application of soil mechanics to analyze the behavior of underground backfill." Short Course, Proc., 14th Colloque en Contrôle de Terrain, Val-d'Or, Association Minière du Québec, Québec (in French).
2. Aubertin, M., Li, L., Arnoldi, S., Belem, T., Bussière, B., Benzaazoua, M., and Simon, R. (2003). "Interaction between backfill and rock mass in narrow stopes." Proc., Soil and Rock America 2003, Vol. 1, P. J. Culligan, H. H. Einstein, and A. J. Whittle, eds., Verlag Glückauf Essen (VGE), Essen, Germany, 1157-1164.
3. Aubertin, M., Li, L., Belem, T., Simon, R., Harvey, A., James, M., Benzaazoua, M., and Bussière, B. (2005). "Methods to estimate induced pressures in backfilled stopes." Proc., Symp. Rouyn-Noranda: Mines and the Environment (CD-ROM), Rouyn-Noranda, QC, Canada, CIM, Montreal, QC, Canada (in French).
4. Belem, T., Benzaazoua, M., and Bussière, B. (2000). "Mechanical behaviour of cemented paste backfill." Proc., 53th Canadian Geotech. Conf., Canadian Geotechnical Society, Vol. 1, Montréal, 373-380.
5. Belem, T., Benzaazoua, M., Bussière, B., and Dagenais, A.-M. (2002). "Effects of settlement and drainage on strength development within mine paste backfill." Proc., Tailings and Mine Waste '02, Balkema, Rotterdam, The Netherlands, 139-148.
6. Belem, T., El Aatar, O., Benzaazoua, M., Bussière, B., and Yilmaz, E. (2007). "Hydrogeotechnical and geochemical characterization of column consolidated cemented paste backfill." Proc., 9th Int. Symp. in Mining with Backfill (CD-ROM), CIM, Montreal.
7. Belem, T., Harvey, A., Simon, R., and Aubertin, M. (2004). "Measurement and prediction of internal stresses in an underground opening due to backfilling with cemented paste." Proc., 15th Int. Symp. on Ground Support in Mining and Underground Construction: Ground Support 2004, Perth, Western Australia, Taylor and Francis Group, London.
8. Benzaazoua, M., Bussière, B., Aubertin, M., Ouellet, S., Godbout, J., Fiset, J.-F., Fall, M., and Belem, T. (2005). "Evaluation of the environmental behavior of cemented paste backfill." Proc., Symp. Rouyn-Noranda: Mines and the Environment (CD-ROM), CIM, Montreal.
9. Benzaazoua, M., Bussière, B., Demers, I., Aubertin, M., Fried, É., and Blier, A. (2008). "Integrated mine tailings management by combining environmental desulphurization and cemented paste backfill: Application to mine Doyon, Quebec, Canada." Minerals Eng. MENGEB0892-6875, 21, 330-340.
10. Billaux, D., Detournay, C., Hart, R., and Rachez, X., eds. (2001). "FLAC and numerical modeling in geomechanics." Proc., 2nd Int. FLAC Symp., Taylor & Francis, London.
11. Blight, G. E. (1986). "Pressure exerted by materials stored in silos. Part I: Coarse materials." Geotechnique GTNQA80016-8505, 36(1), 33-46.
12. Brachman, R. W. I., and Krushelnitzky, R. P. (2005). "Response of a landfill drainage pipe buried in a trench." Can. Geotech. J. CGJOAH0008-3674, 42, 752-762.
13. Brummer, R., Andrieux, P., Detournay, C., and Hart, R., eds. (2003). "FLAC and numerical modeling in geomechanics." Proc., 3rd Int. FLAC Symp., Taylor & Francis, London.
14. Cowin, S. C. (1977). "The theory of static loads in bins." J. Appl. Mech. JAMCAV0021-8936, 44, 409-412.
15. Cowling, R. (1998). "Twenty-five years of mine filling: Development and directions." Australasian Institute of Mining and Metallurgy Publication Series, No. 1, Proc., 6th Int. Symp. on Mining with Backfill, Brisbane, Australia, The Australian Institute of Mining and Metallurgy, Carleton, Australia.
16. Detournay, C., and Hart, R. eds. (1999). "FLAC and numerical modeling in geomechanics." Proc., Int. FLAC Symp., Taylor & Francis, London.
17. Drescher, A. (1991). Analytical methods in bin-load analysis, Elsevier, New York.
18. Filz, G. M. (1996). "Consolidation stresses in soil-bentonite backfilled trenches." Proc., 2nd Int. Congress on Environmental Geotechnology, Osaka, Japan, Balkema, Rotterdam, 497-502.
19. Godbout, J., Bussière, B., Aubertin, M., and Belem, T. (2007). "Evolution of cemented past backfill saturated hydraulic conductivity at early curing time." Proc., 60th Canadian Geotechnical Conf. & 8th Joint CGS/IAH-CNC Groundwater Conf., Canadian Geotechnical Society, Ottawa, 2230-2236.
20. Godbout, J., Bussière, B., Aubertin, M., Belem, T., and Benzaazoua, M. (2004). "Évolution des propriétés de rétention d'eau des remblais miniers cimentés en pâte durant le curage." Proc., 57th Canadian Geotechnical Conf. & 5th Joint CGS-IAH Conf., Canadian Geotechnical Society, Quebec City, Session 4G, 15-22.
21. Grabinsky, M. W., and Bawden, W. F. (2007). "In situ measurements for geomechanical design of cemented paste backfill systems." Proc., 9th Int. Symp. in Mining with Backfill (CD-ROM), CIM, Montreal, Québec.
22. Grice, T. (1998). "Stability of hydraulic backfill barricades." MineFill'98: Proc., 6th Int. Symp. on Mining and Backfill, Brisbane, Australia, M. Bloss, ed., The Australia Institute of Mining and Metallurgy, Carleton, Australia, 117-120.
23. Handy, R. L. (1985). "Arch in soil arching." J. Geotech. Engrg. JGENDZ0733-941010.1061/(ASCE)0733-9410(1985)111:3(302), 111(3), 302-318.
24. Hassani, F., and Archibald, J. F. (1998). Mine backfill (CD-ROM), CIM, Montréal.
25. Hunt, R. E. (1986). Geotechnical engineering analysis and evaluation, McGraw-Hill, New York.
26. Hustrulid, W., Qianyuan, Y., and Krauland, N. (1989). "Modeling of cut-and-fill mining systems-Näsliden revisited." Innovation in mining backfill technology, F. P. Hassani, M. J. Scoble, and T. R. Yu, eds., Balkema, Rotterdam, The Netherlands, 147-164.
27. Itasca Consulting Group, Inc. (2002). FLAC-Fast lagrangian analysis of continua, user's guide, Minneapolis.
28. Kamon, M., Katsumi, T., Inui, T., Ogawa, Y., and Araki, S. (2006). "Hydraulic performance of soil-bentonite mixture barrier." Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proc., ISSMGE 5th Int. Congress, Thomas Telford, London, 733-740.
29. Kang, J., Parker, F., and Yoo, C. H. (2007). "Soil-structure interaction and imperfect trench installations for deeply buried concrete pipes." J. Geotech. Geoenviron. Eng. JGGEFK1090-024110.1061/(ASCE)1090-0241(2007)133:3(277), 133(3), 277-285.
30. Knutsson, S. (1981). "Stresses in the hydraulic backfill from analytical calculations and in-situ measurements." Proc., Conf. on Application of Rock Mech. to Cut and Fill Mining, O. Stephansson and M. J. Jones, eds., Institution of Mining and Metallurgy, London, 261-268.
31. Li, L., and Aubertin, M. (2009). "Influence of water pressure on the stress state in stopes with cohesionless backfill." Geotech. Geologic. Eng. GGENE30960-3182, 27(1), 1-11.
32. Li, L., Aubertin, M., and Belem, T. (2005). "Formulation of a three-dimensional analytical solution to evaluate stress in backfilled vertical narrow openings." Can. Geotech. J. CGJOAH0008-3674, 42(6), 1705-1717.
33. Li, L., Aubertin, M., and Belem, T. (2006). "Erratum: Formulation of a three dimensional analytical solution to evaluate stress in backfilled vertical narrow openings." Can. Geotech. J. CGJOAH0008-3674, 43(3), 338-339.
34. Li, L., Aubertin, M., and Shirazi, A. (2008). "Implementation and application of a new elastoplastic model based on a multiaxial criterion to assess the stress state near underground openings." Int. J. Geomech. IJGNAI1532-3641, (submitted).
35. Li, L., Aubertin, M., Shirazi, A., Belem, T., and Simon, R. (2007). "Stress distribution in inclined backfilled stopes." Proc., 9th Int. Symp. in Mining with Backfill (CD-ROM), CIM, Montreal, Québec.
36. Li, L., Aubertin, M., Simon, R., and Bussière, B. (2005a). "Formulation and application of a general inelastic locus for geomaterials with variable porosity." Can. Geotech. J. CGJOAH0008-3674, 42(2), 601-623.
37. Li, L., Aubertin, M., Simon, R., Bussière, B., and Belem, T. (2003). "Modeling arching effects in narrow backfilled stopes with FLAC." Proc., FLAC and Numerical Modeling in Geomechanics-2003, R. Brummer, P. Andrieux, C. Detournay, and R. Hart, eds., Balkema, Rotterdam, The Netherlands, 211-219.
38. McCarthy, D. F. (1988). Essentials of soil mechanics and foundations: Basic geotechnics. Prentice-Hall, Englewood Cliffs, N.J.
39. Mitchell, R. J. (1992). "Centrifuge model studies of fill pressures on temporary bulkheads." CIM Bull., 85(960), 48-54.
40. Pariseau, W. G. (1975). "Influence of hydraulic backfill on closure and pillar stress in narrow cut and fill stopes." Application of Rock Mechanics: Proc., 5th U.S. Symp. on Rock Mechanics, Custer State Park, S.D., 23-35.
41. Pariseau, W. G. (1981). "Finite-element method applied to cut and fill mining." Application of Rock Mechanics to Cut and Fill Mining: Proc., Conf. on the Application of Rock Mechanics to Cut and Fill Mining, Lulea, Sweden, O. Stephansson and M. J. Jones, eds., The Institution of Mining and Metallurgy, London, 284-292.
42. Pariseau, W. G. (1995). "Coupled three-dimensional finite element modeling of mining in wet ground." CAMI'95: Proc., 3rd Canadian Conf. on Computer Applications in the Mineral Industry, H. S. Mitri, ed., Montreal, Québec, McGill University, Montreal, Canada, 283-292.
43. Pariseau, W. G., Hill, J. R. M., McDonald, M. M., and McNay, L. M. (1976). "A support performance predicted method for hydraulic backfill." USBM Rep. of Investigation 8161, USBM, U.S. Bureau of Mines, 1168-1187.
44. Pariseau, W. G., and Kealy, C. D. (1973). "Support potential of hydraulic backfill." New Horizons in Rock Mechanics: Proc., 14th Symp. on Rock Mechanics, H. R. Hardy, Jr. and R. Stefanko, eds., ASCE, New York, 501-526.
45. Pirapakaran, K., and Sivakugan, N. (2007a). "A laboratory model to study arching within a hydraulic fill stope." Geotech. Test. J. GTJODJ0149-6115, 30(6), 1-8.
46. Pirapakaran, K., and Sivakugan, N. (2007b). "Arching within hydraulic fill stopes." Geotech. Geologic. Eng. GGENE30960-318210.1007/s10706-006-0003-6, 25(1), 25-35.
47. Spangler, M. G., and Handy, R. L. (1984). Soil engineering, Harper and Row, New York.
48. Take, W. A., and Valsangkar, A. J. (2001). "Earth pressures on unyielding retaining walls of narrow backfill width." Can. Geotech. J. CGJOAH0008-367410.1139/cgj-38-6-1220, 38, 1220-1230.
49. Thomas, E. G., Nantel, J. H., and Notley, K. R. (1979). Fill technology in underground metalliferous mines, International Academic Services, Kingston, Ont, Canada.
50. Wang, Y. Z. (2000). "Distribution of earth pressure on retaining wall." Geotechnique GTNQA80016-8505, 50(1), 83-88.