Gas/particle flow characteristics of two swirl burners

Energy Conversion and Management

Volumn 50, Issue 5, 2009, Pages 1180-1191

  Chen, Zhichao ^a   Li, Zhengqi ^a   Jing, Jianping ^a   Chen, Lizhe ^a   Wu, Shaohua ^a   Yao, Yang ^a  

^a HARBIN INSTITUTE OF TECHNOLOGY   (China)

Author keywords

Burner; Coal combustion; Gas particle flow; Three dimensional PDA

Indexed keywords

COAL; COAL INDUSTRY; FLUID DYNAMICS; FUEL BURNERS; FUELS; IGNITION; MULTIPHASE FLOW; PERSONAL DIGITAL ASSISTANTS; SMOKE; TEST FACILITIES; THERMOCHEMISTRY; THREE DIMENSIONAL;

BURNER; COMBUSTION BURNERS; FLOW CHARACTERISTICS; FUEL RICH BURNERS; GAS/PARTICLE FLOW; PARTICLE MEAN DIAMETERS; PARTICLE VOLUMES; PEAK VALUES; RECIRCULATION ZONES; RESIDENCE TIME; RMS VELOCITIES; SWIRL BURNERS; THREE COMPONENTS; THREE-DIMENSIONAL PDA; TWO - PHASE FLOWS;

COAL COMBUSTION;

EID: 62749096586     PISSN: 01968904     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.enconman.2009.01.027     Document Type: Article

References (38)

1. Rees DP, Douglas Smoot L, Hedman PO. Nitrogen oxide formation inside a laboratory pulverized coal combustor. In: 18th International symposium on combustion, Waterloo; 1981. p. 1305-11.
2. x reduction by highly preheated air combustion. Energy Convers Manage 38 (1997) 1061-1071
3. x combustion under high preheated air temperature condition in an industrial furnace. Energy Convers Manage 38 (1997) 1353-1363
4. Kurose R., Ikeda M., Makino H., Kimoto M., and Miyazaki T. Pulverized coal combustion characteristics of high-fuel-ratio coals. Fuel 83 (2004) 1777-1785
5. Li Z.Q., Sun R., Chen L.Z., Wan Z.X., Wu S.H., and Qin Y.K. Effect of primary air flow types in particle distributions in the near swirl burner region. Fuel 81 (2002) 829-835
6. Li Z.Q., Wan Z.X., Sun R., Sun S.H., Chen L.Z., Wu S.H., et al. Influence of division cone angles between the fuel-rich and the fuel-lean ducts on gas-particle flow and combustion near swirl burners. Energy 27 (2002) 1119-1130
7. Li Z.Q., Sun R., Wan Z.X., Sun S., Wu S.H., and Qin Y.K. Gas-particle flow and combustion in the near-burner zone of the swirl-stabilized pulverized coal burner. Combust Sci Technol 175 (2003) 1979-2014
8. x burner development in the USA. Mod Power Syst 8 (1988) 42-47
9. Wei X.L., Xu T.M., and Hui S.E. Burning low volatile fuel in tangentially fired furnaces with fuel rich/lean burners. Energy Convers Manage 45 (2004) 725-735
10. Oman J., Senegačnik A., and Dejanovič B. Influence of lignite composition on thermal power plant performance. Part 2: results of tests. Energy Convers Manage 42 (2001) 265-277
11. x emission and burnout. Fuel 73 (1994) 1447-1452
12. Asay B.W., Douglas Smoot L., and Hedamn P.O. Effect of coal moisture on burnout and nitrogen oxide formation. Combust Sci Technol 35 (1983) 15-31
13. x, low grade coal fired swirl stabilized technology. J Energy Inst 80 3 (2007) 123-130
14. Chen Z.C., Li Z.Q., Wang F.Q., Jing J.P., Chen L.Z., and Wu S.H. Gas-particle flow characteristics of a centrally fuel rich swirl coal combustion burner. Fuel 87 (2008) 2102-2110
15. Chen Z.C., Li Z.Q., Jing J.P., Wang F.Q., Chen L.Z., and Wu S.H. The influence of fuel bias in the primary air duct on the gas/particle flow characteristics near the swirl burner region. Fuel Process Technol 89 (2008) 958-965
16. Chen Z.C., Li Z.Q., Jing J.P., Wang F.Q., Wei H.D., Chen L.Z., et al. Experiment investigations on the performance of a centrally fuel rich swirl coal combustion burner: influence of primary air ratio. Int J Chemical Reactor Eng 6 A39 (2008). http://www.bepress.com/ijcre/vol6/A39
17. x emissions of two kinds of swirl burners in a 300-MWe wall-fired pulverized-coal utility boiler. Combust Sci Technol 180 (2008) 1370-1394
18. Dai G.Q., Chen W.M., Li J.M., and Chu L.Y. Experimental study of solid-liquid two-phase flow in a hydrocyclone. Chem Eng J 74 (1999) 211-216
19. Bao J., and Soo S.L. Measurement of particle flow properties in a suspension by a laser system. Powder Technol 85 (1995) 261-268
20. You C.F., and Zhou Y. Effect of operation parameters on the slagging near swirl coal burner throat. Energy Fuel 20 (2006) 1855-1861
21. Zbiciński I., Strumillo C., Kwapinska M., and Smucerowicz I. Calculations of the pulse combustion drying system. Energy Convers Manage 42 (2001) 1909-1918
22. Pickett L.M., Jackson R.E., and Tree D.R. LDA measurements in a pulverized coal flame at three swirl ratios. Combust Sci Technol 143 (1999) 79-106
23. Moon S., Bae C., Choi J., and Abo-Serie E. The influence of airflow on fuel spray characteristics from a slit injector. Fuel 86 (2007) 400-409
24. Hübner A.W., Tummers M.J., Hanjalić K., and vander Meer T.h.H. Experiments on a rotating-pipe swirl burner. Therm Fluid Sci 27 (2003) 481-489
25. Aísa L., Garcia J.A., Cerecedo L.M., García Palacín I., and Calvo E. Particle concentration and local mass flux measurements in two-phase flows with PDA. Application to a study on dispersion of spherical particles in a turbulent air jet. Int J Multiphase Flow 28 (2002) 301-324
26. Sommerfeld M., and Kussin J. Wall roughness effects on pneumatic conveying of spherical particles in a narrow horizontal channel. Powder Technol 142 (2004) 180-192
27. Zhou L.X., Li Y., Chen T., and Xu Y. Studies on the effect of swirl numbers on strongly swirling turbulent gas-particle flows using a phase-Doppler particle anemometer. Powder Technol 112 (2000) 79-86
28. Xu M.H., Yuan J.W., H C.Y., and Zheng C.G. Investigation of particle dynamics and pulverized coal combustion in a cavity bluff-body burner. Fuel 74 12 (1995) 1913-1917
29. Weber R. Scaling characteristics of aerodynamics, heat transfer, and pollutant emissions in industrial flames. In: Proceedings of the 26th international symposium on combustion, vol. 2; 1996. p. 3343-54.
30. Shin D., Park S., Jeon B., Yu T., and Hwang J. Effect of swirling flow by normal injection of secondary air on the gas residence time and mixing characteristics in a lab-scale cold model combustor. J Mech Sci Technol 20 (2006) 2310-2317
31. Godoy S., Hassan M.A., Ismail M.A., and Lockword F.C. Measurements of char burnout in a large scale laboratory combustor. Combust Sci Technol 80 (1991) 137-150
32. Weber R., Visser B.M., and Bousan F. Assessment of turbulence modeling for engineering prediction of swirling vortices in the near burner zone. Int J Heat Fluid Flow 11 (1990) 225-235
33. x formation and reduction mechanisms in pulverized coal flames. Fuel 73 (1994) 1423-1436
34. x formation in a swirling pulverized coal flame. Fuel 84 (2005) 2093-2101
35. Godoy S., Hirji K., and Lockwood F.C. Stability limits of pulverized coal firing. J Inst Energy 59 (1986) 38-44
36. Horton M.D., Goodson F.P., and Smoot L.D. Characteristics of flat, laminar coal-dust flames. Combust Flame 28 (1977) 187-195
37. Zhou H., and Cen K.F. Experimental measurements of a gas-solid jet downstream of a fuel-rich/lean burner with a collision-block-type concentrator. Powder Technol 170 (2006) 94-107
38. Song Y.H., Pohl J.H., Beér J.M., and Sarofim A.F. Nitric oxide formation during pulverized coal combustion. Combust Sci Technol 28 (1982) 31-39