Optical pH sensitive material based on bromophenol blue-doped polypyrrole

Sensors and Actuators, B: Chemical

Volumn 137, Issue 2, 2009, Pages 426-431

  Ferreira, J ^a   Girotto, E M ^a  

^a STATE UNIVERSITY OF MARINGÁ   (Brazil)

Author keywords

Bromophenol blue; Optode; pH; Polypyrrole

Indexed keywords

PH SENSORS; POLYPYRROLES;

BROMOPHENOL BLUE; IRREVERSIBLE REDUCTIONS; OPTICAL DETERMINATIONS; OPTODE; PH RANGES; PH SENSITIVES; POTENTIAL APPLICATIONS; SALINE SOLUTIONS; SPECTRAL CHANGES; SYNERGISTIC EFFECTS;

PH EFFECTS;

EID: 62649151811     PISSN: 09254005     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.snb.2009.01.039     Document Type: Article

References (58)

1. MacDiarmid A.G. Synthetic metals: a novel role for organic polymers (Nobel Lecture). Angew. Chem. Int. Ed. 40 (2001) 2581-2590
2. MacDiarmid A.G. Polyaniline and polypyrrole: where are we headed?. Synth. Met. 84 (1997) 27-34
3. In: Skotheim T.A. (Ed). Handbook of Conducting Polymers vol. 1 (1986), Marcel Dekker, New York 727
4. Amaike M., and Iihama T. Chemical polymerization of pyrrole with disulfide structure and the application to lithium secondary batteries. Synth. Met. 156 (2006) 239-243
5. Hacarlioglu P., Toppare L., and Yilmaz L. Polycarbonate-polypyrrole mixed matrix gas separation membranes. J. Membr. Sci. 225 (2003) 51-62
6. Alizadeh N., and Tazekendi H.K. Linear alkylbenzenesulfonate (LAS) ion-selective electrode based on electrochemically prepared polypyrrole and PVC. Sens. Actuators B: Chem. 75 (2001) 5-10
7. Dong S., Sun Z., and Lu Z. Chloride chemical sensor based on an organic conducting polypyrrole polymer. Analyst 113 (1988) 1525-1528
8. Hin B.F.Y.Y., Sethi R.S., and Lowe C.R. Multi-analyte microelectronic biosensors. Sens. Actuators B: Chem. 1 (1990) 550-554
9. Ding H., and Ram M.K. Applications of ordered ultrathin conducting polymeric films of polypyrrole. Supramol. Eng. Cond. Mater. (2005) 199-231
10. Ferreira C.A., Aeiyach S., Aaron J.J., and Lacaze P.C. Electrosynthesis of strongly adherent polypyrrole coatings on iron and mild steel in aqueous media. Electrochim. Acta 41 (1996) 1801-1809
11. Tieke B., and Gabriel W. Conducting polypyrrole-polyimide composite films. Polymer 31 (1990) 20-23
12. Warren L.F., and Anderson D.P. Polypyrrole films from aqueous electrolytes. The effect of anions upon order. J. Electrochem. Soc. 134 (1987) 101-105
13. Ferreira J., Santos M.J.L., Matos R., Ferreira O.P., Rubira A.F., and Girotto E.M. Structural and electrochromic study of polypyrrole synthesized with azo and anthraquinone dyes. J. Electroanal. Chem. 591 (2006) 27-32
14. Nath A., Kanungo M., and Contractor A.Q. In situ measurement of pH in the interior of conducting polymer microtubules. J. Electroanal. Chem. 557 (2003) 119-125
15. Girotto E.M., and De Paoli M.A. Polypyrrole color modulation and electrochromic contrast enhancement by doping with a dye. Adv. Mater. 10 (1998) 790-793
16. Leiner M.J.P., and Wolfbeis O.S. Fiber optic pH sensors. Fiber Opt. Chem. Sens. Biosens. 1 (1991) 359-384
17. Seitz W.R. Chemical sensors based on immobilized indicators and fiber optics. Crit. Rev. Anal. Chem. 19 (1988) 135-173
18. Peterson J.I., Goldstein S.R., and Fitzgerald R.V. Fiber optic pH probe for physiological use. Anal. Chem. 52 (1980) 864-869
19. Baldini F., Bracci S., Cosi F., Bechi P., and Pucciani F. Controlled-pore glasses embedded in plastic optical fibers for gastric pH sensing purposes. Appl. Spectrosc. 48 (1994) 549-552
20. Robert-Baldo G.L., Morris M.J., and Byrne R.H. Spectrophotometric determination of seawater pH using phenol red. Anal. Chem. 57 (1985) 2564-2567
21. Boisde G., Blanc F., and Pérez J.J. Chemical measurements with optical fibers for process control. Talanta 35 (1988) 75-82
22. Moreno M.C., Jiménez M., Conde C.P., and Câmara C. Analytical performance of an optical pH sensor for acid-base titration. Anal. Chim. Acta 230 (1990) 35-40
23. Holobar A., Weigl B.H., Trettnak W., Benes R., Lehmann H., Rodríguez N.V., Wollschlager A., Leary P.O., Raspor P., and Wolfbeis O.S. Experimental results on an optical pH measurement system for bioreactors. Sens. Actuators B: Chem. 11 (1993) 425-430
24. Leiner M.J.P., and Hartmann P. Theory and practise in optical pH sensing. Sens. Actuators B: Chem. 11 (1993) 281-289
25. Narayanaswamy R. Optical chemical sensors: transduction and signal processing. Analyst 118 (1993) 317-322
26. Hao T., Xing X., and Liu C.C. A pH sensor constructed with two types of optical fibers: the configuration and the initial results. Sens. Actuators B: Chem. 10 (1993) 155-159
27. Rao B.S., Puschett J.B., and Matyjaszewski K. Preparation of pH sensors by covalent linkage of dye molecules to the surface of polystyrene optical fibers. J. Appl. Polym. Sci. 43 (1991) 925-928
28. Mullen K.I., Wang D.X., Crane L.G., and Carron K.T. Determination of pH with surface-enhanced Raman fiber optic probes. Anal. Chem. 64 (1992) 930-936
29. Bacci M., Baldini F., and Bracci S. Spectroscopic behavior of acid-base indicators after immobilization on glass supports. Appl. Spectrosc. 45 (1991) 1508-1515
30. Kostov Y., Tzonkov S., Yotova L., and Krysteva M. Membranes for optical pH sensors. Anal. Chim. Acta 280 (1993) 15-19
31. Dafu C., Qiang C., Jinghong H., Jinge C., Yating L., and Zemin Z. Optical-fibre pH sensor. Sens. Actuators B: Chem. 12 (1993) 29-32
32. Callahan D., and Ballantine D.S. Investigation of relative humidity effects on the response behavior of a pH indicator-based OWG vapor sensor. Talanta 40 (1993) 431-444
33. Huang W.S., and MacDiarmid A.G. Optical properties of polyaniline. Polymer 34 (1993) 1833-1845
34. de Marcos S., and Wolfbeis O.S. Optical sensing of pH based on polypyrrole films. Anal. Chim. Acta 334 (1996) 149-153
35. Javaid M.A., and Keay P.J. A generic technique for coating doped sol-gel films onto the inside of tubes for use as colorimetric sensors. J. Sol-Gel Sci. Technol. 17 (2000) 55-59
36. Atkins P., and Jones L. Chemical Principles (2001), Bookman, Porto Alegre
37. Sedjil M., Lu G.N., Michard G., and Prevot F. A colorimetric method with the use of BDJ detector for seawater pH measurement. Anal. Chim. Acta 377 (1998) 179-184
38. Atkins P.W. General Chemistry vol. 1 (1990), Scientific American, New York p. 204
39. Safavi A., and Abdollahi H. Optical sensor for high pH values. Anal. Chim. Acta 367 (1998) 167-173
40. Pei Q., and Qian R. Protonation and deprotonation of polypyrrole chain in aqueous solutions. Synth. Metals 45 (1991) 35-48
41. Inganas O., Erlandsson R., Nylander C., and Lundstrom I. Proton modification of conducting polypyrrole. J. Phys. Chem. Solids 45 (1984) 427-432
42. Inganäs O., Salaneck W.R., Österholm J.E., and Laakso J. Thermochromic and solvatochromism effects in poly(3-hexylthiophene). Synth. Met. 22 (1988) 395-406
43. McGovern S.T., Spinks G.M., and Wallace G.G. Micro-humidity sensors based on a processable polyaniline blend. Sens. Actuators B: Chem. 107 (2005) 657-665
44. Iwasaki K., Fujimoto H., and Matsuzaki S. Conformational changes of poly(3-alkylthiophene)s with temperature and pressure. Synth. Met. 63 (1994) 101-108
45. Michalska A., and Maksymiuk K. On the pH influence on electrochemical properties of poly(pyrrole) and poly(N-methylpyrrole). Electroanalysis 10 (1998) 177-180
46. Li Y.F., and Qian R.Y. On the nature of redox processes in the cyclic voltammetry of polypyrrole nitrate in aqueous solutions. J. Electroanal. Chem. 362 (1993) 267-272
47. Li Y.F., and Qian R.Y. Effect of anion and solution pH on the electrochemical behavior of polypyrrole in aqueous solution. Synth. Met. 28 (1989) C127-C132
48. Kuwabata S., Nakamura J., and Yoneyama H. Dependence of conductivity of polypyrrole film doped with p-phenolsulfonate on solution pH. J. Electrochem. Soc. 137 (1990) 2147-2150
49. Xie H., Yan M.M., and Jiang Z.Y. Transition of polypyrrole from electroactive to electroinactive state investigated by use of in situ FTIR spectroscopy. Electrochim. Acta 42 (1997) 2361-2367
50. Koncki R., and Wolfbeis O.S. Composite films of Prussian blue and N-substituted polypyrroles: fabrication and application to optical determination of pH. Anal. Chem. 70 (1998) 2544-2550
51. Slim C., Ktari N., Cakara D., Kanoufi F., and Combellas C. Polyaniline films based ultramicroelectrodes sensitive to pH. J. Electroanal. Chem. 612 (2008) 53-62
52. Macca C. The current usage of selectivity coefficients for the characterization of ion-selective electrodes. A critical survey of the 200/2001 literature. Electroanalysis 15 (2003) 997-1010
53. Morf W.E., Seiler K., Rusterholz B., and Simon W. Design of a calcium-selective optode membrane based on neutral ionophores. Anal. Chem. 62 (1990) 738-742
54. Meier P.C. Two-parameter Debye-Hückel approximation for the evaluation of mean activity coefficients of 109 electrolytes. Anal. Chim. Acta 136 (1982) 363-368
55. Jin Z., Su Y.X., and Duan Y.X. An improved optical pH sensor based on polyaniline. Sens. Actuators B: Chem. 71 (2000) 118-122
56. Kaden H., Jahn H., and Berthold M. Study of the glass/polypyrrole interface in an all-solid-state pH sensor. Solid State Ionics 169 (2004) 129-133
57. Leiner M.J.P. Optical sensors for in vitro blood gas analysis. Sens. Actuators B: Chem. 29 (1995) 169-173
58. Werner T., Huber C., Heinl S., Kollmannsberger M., Daub J., and Wolfbeis O.S. Novel optical pH-sensor based on a boradiazaca-indacene derivative. Fresenius J. Anal. Chem. 359 (1997) 150-154