The effect of residual oil on deep-bed filtration of particles in injection water

SPE Production and Operations

Volumn 24, Issue 1, 2009, Pages 117-123

  Ali, Mohammad Ali Juma ^a   Currie, Peter K ^b   Salman, Mohammad J ^a  

^a KUWAIT INSTITUTE FOR SCIENTIFIC RESEARCH   (Kuwait)

^b DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

ENHANCED RECOVERY; HEMATITE; PRODUCED WATER; WATER FILTRATION; WATER QUALITY;

DEEP BED FILTRATION; DEPOSITION MECHANISM; ENHANCED OIL RECOVERY; FILTRATION COEFFICIENT; HEMATITE PARTICLES; INJECTION PROCESS; PRESSURE MAINTENANCE; RESIDUAL OIL SATURATION;

INJECTION (OIL WELLS);

ENHANCED OIL RECOVERY; FILTRATION; FLUID INJECTION; FORMATION WATER; HYDROCARBON RESERVOIR; OIL PRODUCTION; PERMEABILITY; SATURATION; SUSPENDED PARTICULATE MATTER;

EID: 62649140270     PISSN: 19301855     EISSN: None     Source Type: Journal    
DOI: 10.2118/107619-pa     Document Type: Article

References (18)

1. Al-Abduwani, F.A.H. 2005. Internal filtration and external filter cake build-up in sandstones. PhD thesis, Delft University of Technology, Delft, The Netherlands.
2. Al-Abduwani, F.A.H., Hime, G., Alvarez, A., and Farajzadah, R. 2005a. New Experimental and Modeling Approach for the Quantification of Internal Filtration. Paper SPE 94634 presented at the SPE European Formation Damage Conference, Sheveningen, The Netherlands, 25-27 May. DOI: 10.2118/94634-MS.
3. Al-Abduwani, F.A.H., Shirzadi, A., van der Broek, W.M.G.T., and Currie, P.K. 2005b. Formation Damage vs. Solid Particles Deposition Profile During Laboratory-Simulated Produced-Water Reinjection. SPEJ 10 (2): 138-151. SPE-82235-PA. DOI: 10.2118/82235-PA.
4. Ali, M.A.J. 2007. Effect of residual oil on deep bed filtration and formation damage. PhD thesis, Delft University of Technology, Delft, The Netherlands.
5. Ali, M.A.J., Currie, P.K., and Salman, M.J. 2005a. Measurement of the Particle Deposition Profile in Deep-Bed Filtration During Produced Water Re-Injection. Paper SPE 93056 presented at the SPE Middle East Oil and Gas Show and Conference, Bahrain, 12-15 March. DOI: 10.2118/93056-MS.
6. Ali, M.A.J., Currie, P.K., and Salman, M.J. 2005b. Effect of Residual Oil on the Particle Deposition in Deep-Bed Filtration During Produced Water Reinjection. Paper SPE 94493 presented at the SPE European Formation Damage Conference, Sheveningen, The Netherlands, 25-27 May. DOI: 10.2118/94483-MS.
7. Bedrikovetsky, P., Marchesin, D., Hime, G., Alvarez, A.L., Marchesin, A. O., Siqueira, A.G., Souza, A.L.S., Shecaira, F.S., and Rodrigues, J.R. 2002. Porous media deposition damage from injection of water with particles. Proc., 8th European Conference on the Mathematics of Oil Recovery, Freiberg, Germany, 3-6 September, E18.
8. Bedrikovetsky, P., Marchesin, D., Hime, G., Siqueira, A.G., Serra, A.L., and Rodrigues, J.R. 2004. Inverse Problems for Treatment of Laboratory Data on Injectivity Impairment. Paper SPE 86523 presented at the SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 18-20 February. DOI: 10.2118/86523-MS.
9. Bedrikovetsky, P., Tran, T.L., Van den Broek, W.M.G.T., Marchesin, D., Rezende, E., Siqueira, A.G., Souza, A.L.S., and Shecaira, F.S. 2003. Damage Characterization of Deep-Bed Filtration From Pressure Measurements. SPEPF 18 (2): 119-128. SPE-83673-PA. DOI: 10.2118/83673-PA.
10. Coleman, J.R. and McLelland, W.G. 1994. Produced Water Re-Injection: How Clean is Clean? Paper SPE 27394 presented at the SPE Formation Damage Control Symposium, Lafayette, Louisiana, USA, 7-10 February. DOI: 10.2118/27394-MS.
11. Farajzadah, R. 2005. Produced Water Re-injection (PWRI): An experimental investigation into internal filtration and external cake buildup. MSc thesis, Delft University of Technology, Delft, The Netherlands.
12. Hsi, C.D., Dudzik, D.S., Lane, R.H., Buettner, J.W., and Neira, R.D. 1994. Formation Injectivity Damage Due to Produced Water Reinjection. Paper SPE 27395 presented at the SPE Formation Damage Control Symposium, Lafayette, Louisiana, USA, 7-10 February. DOI: 10.2118/27395-MS.
13. Iwasaki, T. 1937. Some notes on sand filtration. J. of the American Water Works Association 29:1591-1602.
14. Janssen, P. 2000. Characterization of oil-water mixtures produced in high-water cut oil wells. PhD thesis, Delft University of Technology, Delft, The Netherlands.
15. Thro, M.E. and Arnold, K.E. 1997. Water-Droplet-Size Determination for Improved Oil-Treater Sizing. SPEPF 12 (2): 106-111. SPE-285 37-PA. DOI: 10.2118/28537-PA.
16. Tran, T.K. 1998. Permeability decreases of sandstones as a result of injection of oil and solids containing water. MSc thesis, Delft University of Technology, Delft, The Netherlands.
17. van der Zande, M. 2000. Droplet break-up in turbulent oil-in-water flow through a restriction. PhD thesis, Delft University of Technology, Delft, The Netherlands.
18. Wojtanowicz, SK, Krilov, Z., and Langlinais, J.P. 1987. Study of the Effect of Pore Blocking Mechanisms on Formation Damage. Paper SPE 16233 presented at the SPE Production Operations Symposium, Oklahoma City, Oklahoma, USA, 8-10 March. DOI: 10.2118/16233-MS.