Approaches for the treatment of waste streams of the aluminium anodising industry

Journal of Hazardous Materials

Volumn 164, Issue 2-3, 2009, Pages 409-414

  Alvarez Ayuso E ^a  

^a INSTITUTO DE RECURSOS NATURALES Y AGROBIOLOGÍA DE SALAMANCA   (Spain)

Author keywords

Aluminium; Anodising; Recovery; Recycling; Wastewaters

Indexed keywords

ALUMINIUM; ALUMINIUM ANODISING; ANODISING; CLASSICAL METHODS; ENVIRONMENTALLY-FRIENDLY; GEOCHEMICAL PROCESS; INDUSTRIAL SECTORS; INNOVATIVE METHODS; NEUTRALISATION; PROCESS COSTS; RESOURCE MATERIALS; WASTE STREAMS;

ALUMINUM; RECYCLING; WASTEWATER; WASTEWATER DISPOSAL;

WASTEWATER TREATMENT;

ALUMINUM; COST; INDUSTRIAL WASTE; MARKET; RECYCLING; REDUCTION; STREAM; WASTEWATER; WATER TREATMENT;

ALUMINUM; CONSERVATION OF NATURAL RESOURCES; INDUSTRIAL WASTE; RIVERS; WATER POLLUTANTS, CHEMICAL;

EID: 62649091325     PISSN: 03043894     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2008.08.054     Document Type: Review

References (58)

1. Kalmar M. Proceedings of the European Surface Treatment of Aluminium. ESTAL, Istanbul (2000) 98-132
2. Ribeiro M.J., and Labrincha J.A. Properties of sintered mullite and cordierite pressed bodies manufactured using Al-rich anodising sludge. Ceram. Int. 34 (2008) 593-597
3. Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste.
4. Council Decision 2003/33/EC of 19 December 2002 Establishing Criteria and Procedures for the Acceptance of Waste at Landfills Pursuant to Article 16 of and Annex II to Directive 1999/31/EC.
5. McLay W.J., and Reinhard F.P. Waste minimization and recovery technologies. Met. Finish 98 (2000) 817-850
6. BAT Reference Document, Surface Treatment of Metals and Plastic Materials using Electrolytic or Chemical Process, European Committee for Surface Treatment, European IPPC Bureau, 2002.
7. Brook R.J. Concise Encyclopedia of Advanced Ceramic Materials (1991), Pergamon Press, New York
8. Pajunen P. Chemical recovery for aluminium finishers. Workshop on Cleaner Production in the Metal Finishing Industry. Taipei (1999)
9. C. Iranzo Blasco, Procedimiento de fabricación de sulfato de aluminio y sus derivados a partir de lodos de hidróxido de aluminio procedentes de las plantas de anodizados, Spanish Patent 2,176,064 (2002).
10. Perez J.A., Terradas R., Manent M.R., Seijas M., and Martinez S. Inertization of industrial wastes in ceramic materials. Ind. Ceram. 16 (1996) 7-10
11. Pereira D.A., Aguiar J.B., Castro F.P., Almeida M.F., and Labrincha J.A. Mechanical behaviour of Portland cement mortars with incorporation of Al-rich salt sludges. Cement Concrete Res. 30 (2000) 1131-1138
12. Pereira D.A., Couto D.M., and Labrincha J.A. Incorporation of aluminium-rich residues in refractory bricks. Ceram. Forum Int. 77 (2000) 21-25
13. Aksay I.A., Dabbs D.M., and Sarikaya M. Mullite for structural, electronic and optical applications. J. Am. Ceram. Soc. 74 (1991) 2343-2358
14. Mizuno M. Microstructure, microchemistry, and flexural strength of mullite ceramics. J. Am. Ceram. Soc. 74 (1991) 3017-3022
15. Naga S.M., and Aziz D.A.A. Effect of alumina/clay ratio on the properties of doped electrical alumina porcelain. Br. Ceram. Trans. 101 (2002) 129-132
16. 18). J. Am. Ceram. Soc. 76 (1993) 1873-1876
17. Scmidbauer E., and Mirwald P.W. Electrical conductivity of cordierite. Mineral. Petrol. 48 (1993) 201-214
18. Das R.N., Madhusoodana C.D., and Okada K. Rheological studies on cordierite honeycomb extrusion. J. Eur. Ceram. Soc. 22 (2002) 2893-2900
19. Martinez A.G.T., Camerucci M., Urretavizcaya G., and Cavalieri A.L. Behaviour of cordierite materials under mechanical and thermal biaxial stress. Br. Ceram. Trans. 101 (2002) 94-99
20. Tulyaganov D.U., Tukhtaev M.E., Escalante J.I., Ribeiro M.J., and Labrincha J.A. Processing of cordierite based ceramics from alkaline-earth-aluminosilicate glass, kaolin, alumina and magnesite. J. Eur. Ceram. Soc. 22 (2002) 1775-1782
21. Camerucci M.A., Urretavizcaya G., and Cavalieri A.L. Sintering of cordierite based materials. Ceram. Int. 29 (2003) 159-168
22. Ferreira J.M.F., and Olhero S.M. Al-rich sludge treatments towards recycling. J. Eur. Ceram. Soc. 22 (2002) 2243-2249
23. Ribeiro M.J., Tulyaganov D.U., Ferreira J.M., and Labrincha J.A. Recycling of Al-rich industrial sludge in refractory ceramic pressed bodies. Ceram. Int. 28 (2002) 319-326
24. Ribeiro M.J., Abrantes J.C.C., Ferreira J.M., and Labrincha J.A. Predicting processing-sintering-related properties of mullite-alumina ceramic bodies based on Al-rich anodising sludge by impedance spectroscopy. J. Eur. Ceram. Soc. 22 (2004) 2243-2249
25. Ribeiro M.J., Tulyaganov D.U., Ferreira J.M.F., and Labrincha J.A. Production of Al-rich sludge-containing ceramic bodies by different shaping techniques. J. Mater. Process. Tech. 148 (2004) 139-146
26. Ribeiro M.J., Tulyagavov D.U., Ferreira J.M., and Labrincha J.A. High temperature mullite dissolution in ceramic bodies derived from Al-rich sludge. J. Eur. Ceram. Soc. 25 (2005) 703-710
27. Ribeiro M.J., Blackburn S., Ferreira J.M., and Labrincha J.A. Extrusion of alumina and cordierite-based tubes containing Al-rich anodising sludge. J. Eur. Ceram. Soc. 26 (2006) 817-823
28. Labrincha J.A., Albuquerque C.M., Ferreira J.M., and Ribeiro M.J. Electrical characterisation of cordierite bodies containing Al-rich anodising sludge. J. Eur. Ceram. Soc. 26 (2006) 825-830
29. Verheul H. How social networks influence the dissemination of cleaner technologies to SMEs. J. Cleaner Prod. 7 (1999) 213-219
30. Dufour J., La Iglesia A., Gonzalez V., and Ruiz-Sierra J.C. Viability of the use of pickling baths from aluminium surface treatment for synthesizing low Si/Al zeolites. J. Environ. Sci. Health A 32 (1997) 1807-1825
31. Dufour J., Gonzalez V., and La Iglesia A. Optimization of 4A zeolite synthesis as recovery of wastes from aluminium finishing. J. Environ. Sci. Health A 36 (2001) 1257-1269
32. Dufour J., Gonzalez V., and La Iglesia A. Synthesis of 13X zeolite from alkaline waste streams in the aluminium anodizing industry. Ind. Eng. Chem. Res. 40 (2001) 1140-1145
33. La Iglesia A., Gonzalez M.V., and Dufour J. Zeolite synthesis employing alkaline waste effluents from the aluminum industry. Environ. Prog. 21 (2002) 105-110
34. Moreno N., Querol X., Plana F., Andres J.M., Janssen M., and Nugteren H. Pure zeolite synthesis from silica extracted from coal fly ashes. J. Chem. Technol. Biotechnol. 77 (2002) 274-279
35. Álvarez-Ayuso E., and Nugteren H.W. Synthesis of dawsonite: a method to treat the etching waste streams of the aluminium anodising industry. Water Res. 39 (2005) 2096-2104
36. Serna C.J., White J.L., and Hem S.L. Nature of amorphous aluminum hydroxycarbonate. J. Pharm. Sci. 67 (1978) 324-331
37. Hayashi K., Toyoda S., Nakashima K., and Morinaga K. Optimum synthetic conditions of ammonium aluminum carbonate hydroxide (AACH) as starting material for α-alumina fine powders. J. Ceram. Soc. Jpn. 98 (1990) 444-449
38. Giannos M., Hoang M., and Turney T.W. Thermally stable aluminas for high temperature applications. Chem. Lett. 8 (1998) 793-794
39. Li J.G., Ikegami T., Lee J.H., Mori T., and Yajima Y. Synthesis of Mg-Al spinel powder via precipitation using ammonium bicarbonate as the precipitant. J. Eur. Ceram. Soc. 21 (2001) 139-148
40. 2. Geochim. Cosmochim. Ac. 71 (2007) 4438-4455
41. P. Van Der Heem, Dawsonite, U.S. Patent 4,221,771 (1980).
42. R.L. Altman, Synthesis of Dawsonites. U.S. Patent 4,356,157 (1982).
43. G. Herold, Process for Producing Dawsonite, US Patent 5,078,983 (1992).
44. Zhang X., Wen Z., Gu Z., Xu X., and Lin Z. Hydrothermal synthesis and thermodynamic analysis of dawsonite-type compounds. J. Solid State Chem. 177 (2004) 849-855
45. Álvarez-Ayuso E., and Nugteren H.W. Synthesis of ettringite: a way to deal with the acid wastewaters of aluminium anodising industry. Water Res. 39 (2005) 65-72
46. 3. Thermochim. Acta 26 (1994) 129-140
47. Zhou Q., and Glasser F.P. Thermal stability and decomposition mechanisms of ettringite at <120 °C. Cement Concrete Res. 31 (2001) 1333-1339
48. Goetz-Neunhoeffer F., Neubauer J., and Schwesig P. Mineralogical characteristics of Ettringites synthesized from solutions and suspensions. Cement Concrete Res. 36 (2006) 65-70
49. Gougar M.L.D., Scheetz B.E., and Roy D.M. Ettringite and C-S-H-portland cement phases for waste ion immobilization: a review. Waste Manage. 16 (1996) 295-303
50. 2O at 5-75 °C. Geochim. Cosmochim. Ac. 63 (1999) 1969-1980
51. Zhang Q., and Saito F. Sonochemical synthesis of ettringite from a powder mixture suspended in water. Powder Technol. 107 (2000) 43-47
52. Zhang M., and Readon E.J. Removal of B, Cr, Mo and Se from wastewater by incorporation into hydrocalumite and ettringite. Environ. Sci. Technol. 37 (2003) 2947-2952
53. 2--hydrotalcite type compound from the acid wastewaters of the aluminium-anodizing industry. Clay Clay Miner. 53 (2005) 11-17
54. 2--hydrotalcite type compound. Chemosphere 62 (2006) 155-162
55. Suzuki E., and Ono Y. Aldol condensation reaction between formaldehyde and acetone over heat-treated synthetic hydrotalcite and hydrotalcite-like compounds. B. Chem. Soc. Jpn. 61 (1988) 1008-1010
56. Dumitriu E., Hulea V., Chelaru C., Catrinescu C., Tichit D., and Duran R. Influence of the acid-base properties of solid catalysts derived from hydrotalcite-like compounds on the condensation of formaldehyde and acetaldehyde. Appl. Catal. A: Gen. 178 (1999) 145-157
57. Kovanda F., Kolousek D., Kalouskova R., and Vymazal Z. Starting production of synthetic hydrotalcite in the Czech Republic. Chem. Listy 95 (2001) 493-497
58. Chimenos J.M., Fernández A.I., Hernández A., Haurie L., Espiell F., and Ayora C. Optimization of phosphate removal in anodizing aluminium wastewater. Water Res. 40 (2006) 137-143