The rheological modification of talc-filled polypropylene by epoxy-polyester hybrid resin and its effect on morphology, crystallinity, and mechanical properties

Polymer Engineering and Science

Volumn 49, Issue 3, 2009, Pages 619-629

  Jahani, Yousef ^a   Ehsani, Morteza ^a  

^a IRAN POLYMER AND PETROCHEMICAL INSTITUTE   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

CRYSTALLIZATION; DIFFERENTIAL SCANNING CALORIMETRY; EPOXY RESINS; FILLED POLYMERS; HYBRID COMPOSITES; IMPACT STRENGTH; PLASTIC PRODUCTS; SCANNING ELECTRON MICROSCOPY; TALC; TENSILE STRENGTH; VISCOSITY; YIELD STRESS;

CO-ROTATING TWIN SCREW EXTRUDERS; COROTATING TWIN-SCREW EXTRUDERS; CRISTALLINITY; CRYSTALLIZATION BEHAVIOR; EPOXY; MEASUREMENTS OF; PROPERTIES OF COMPOSITES; REACTIVE MIXING; SUSPENSION VISCOSITY; TWO-LINE;

POLYPROPYLENES;

EID: 62449226173     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.21294     Document Type: Article

References (44)

1. , J, Karger-Kocsis, Polypropylene; Structure, Blends and Composites, Vol. 1, Chapman & Hall, London (1995)
2. , H.S. Katz and J.V. Milewsky, Eds., Handbook of Fillers for Plastics, Van Nostrand Reinhold, New York, 216 (1987).
3. , M. Fujiyama and T. Wakino, J. Appl. Polym. Sci., 42, 2739 (1991).
4. J.H. Hedrick, I. Yilgor, M. Jurek, and G.L, Wilkens, Polymer, 32, 2020 (1991).
5. B. Pukanszky, K. Belina, A. Rocken Bauer, and F. Maurer, Composites, 25, 205 (1994).
6. J.I. Velasco, J.A. Desaja, and A.B. Martinez, Appl. Polym. Sci., 61, 125 (1996).
7. J. Rohraiann, U.S. Patent 6, 429, 250 (2002).
8. J. Karger-Kocsis, "Microstructural Aspects of Fracture in Polypropylene and in its Filled, Chopped Fiber and Fiber Mat Reinforced Composites, " in Polypropylene: Structure, Blends and Composites, J. Karger-Kocsis, Ed., Chapman & Hall, London, 142(1995).
9. B. Pukanszky, "Paniculate Filled Polypropylene: Structure and Properties, " in Polypropylene: Structure, Blends and Composites, Karger-Kocsis J, Ed., Chapman & Hall, London, 1 (1995).
10. A. Gnatowski and J. Koszkul, J. Mater. Process. Technol., 175, 212 (2006).
11. M.C. Chen, DJ. Hourston, and W.B. Sun, Eur. Polym. J., 31, 199(1995).
12. C. Wan and S.H. Patel, Polym. Eng. Sci., 43, 1276 (2003).
13. X. Jiang, H. Huang, Y. Zhang, and Y.I. Zhang, J. Appl. Polym. Sci., 92, 1473 (2004).
14. Y. Jahani, Polym. Eng. Sci., 47, 2041 (2007).
15. L. Shechter, J. Wynstra, and R.E. Kurkjy, Ind. Eng. Chem., 49, 1107 (1957).
16. G. Mann and J.P. Montfort, "Molecular Rheology and Linear Viscoelasticity, " in Rheology for Polymer Melt Processing, J.M. Piau and J.F. Agassant, Eds., Elsevier Science, Amsterdam, 95 (1996).
17. P.R. Hornsby, Adv. Polym. Sci., 139, 155 (1999).
18. A.Y. Malkin, Adv. Polym. Sci., 96, 69 (1990).
19. Q. Zheng, D. Du, B. Yang, and G. Wu, Polymer, 42, 5743 (2001).
20. K.J. Kim and J.L, White, .J. Non-Newtonian Fluid Mech., 66, 257 (1996).
21. Y. Suetsugu and J.L. White, .J. Appl. Polym. Sci., 28, 1481 (1983).
22. D.N. Robinson, K.J. Kim, and J.L. White, J. Appl. Mech., 69, 641 (2002).
23. H. Tanaka and J.L. White, J. Non-Newtonian Fluid Mech., 7, 333 (1980).
24. N.A. Frankel and A. Acrivos, Chem. Eng. Sci., 22, 847 (1967).
25. G.J. Jarzebski, Rheol. Acta, 20, 280 (1981).
26. A.V. Shenoy, Rheology of Filled Polymer Systems, Kluwer Academic Publishers, The Netherlands, 287 (1999).
27. S.H. Jafari, P. Pötschke, M. Stephan, H. Worth, and H. Alberts, Polymer, 43, 6985 (2002).
28. E.R. Harrell and N. Nakayama, "Modified Cole-Cole Plot as a Tool for Rheological Analysis of Polymers, " in Current Topics in Polymer Science, Rheology and Polymer Process/' Multiphase System, R.M, Ottenbrite, L.A. Utracki, and S. Inoue, Eds., Karl Hanser, New York, 149 (1987).
29. T. Kataoka, T. Kitano, H. Sasahara, and K. Nishijima, Rheol. Acta, 17, 149 (1978).
30. T. Kitano, T. Kataoka, and T. Shirata, Rheol. Acta, 20, 207 (1981).
31. A.J. Poslinski, M.E. Ryan, R.K. Gupta, S.G. Seshadri, and F.J. Frechette, J. Rheol., 32, 703 (1988).
32. A.J. Poslinski, M.E. Ryan, R.K. Gupta, S.G. Seshadri, and F.J. Frechette, J. Rheol., 32, 751 (1988).
33. J.E. Stamhuis and J.P.A Loppe, Rheol. Acta, 21, 103 (1982).
34. P.M. McGenity, J.J. Hooper, C.D. Paynter, A.M. Riley, C. Nutbeem, N.J. Elton, and J.M. Adams, Polymer, 33, 5215 (1992).
35. C. Albano, J. Papa, M. Ichazo, J. González, and C. Ustariz, Compos. Struct., 62, 291 (2003).
36. C.M. Chan, J.S. Wu, J.X. Li, and Y.K. Cheung, Polymer, 43, 2981 (2002).
37. X.F. Zhang, F. Xie, Z.L, Peng, Y. Zhang, and W. Zhou, Eur. Polym. J., 38, 1 (2002).
38. G. Bogoeva-Gaceva, A. Janevski, and E. Mäder, J. Adhes. Sci. Technol., 14, 363 (2000).
39. C.W. Macosko, Rheology: Principles, Measurements and Applications, VCH Publishers, New York, 12 (1994).
40. N.S. Enikolopyan, Adv. Polym. Sci., 96, 3 (1990).
41. B. Weidenfeller, Mater. Sci. Eng. A, 442, 371 (2006).
42. J. Hartikainen, P. Hine, J.S. Szabo, M. Lindner, T. Harmia, R.A. Duckett, and K. Friedrich, Compos. Sci. Technol., 65, 257 (2005).
43. J. Kolarik and J. Jancar, Polymer, 33, 4961 (1992).
44. J. Wang, J.E. Tung, M.Y. Ahmed Fuad, and P.R. Hornsby, J. Appl. Polym. Sci., 60, 1425 (1996).