Hierarchical evaluation of failure parameters in composite plates

AIAA Journal

Volumn 47, Issue 3, 2009, Pages 692-702

  Carrera, E ^a,c   Giunta, G ^a,b,c  

^a POLITECNICO DI TORINO   (Italy)

^b LUXEMBOURG INSTITUTE OF SCIENCE AND TECHNOLOGY   (Luxembourg)

^c Department of Aeronautic and Space Engineering ^*  (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING LOADINGS; CARRERA'S UNIFIED FORMULATIONS; COMPOSITE PLATES; FAILURE CRITERION; FAILURE LOCATIONS; FAILURE PARAMETERS; FIRST-PLY FAILURES; HIERARCHICAL EVALUATIONS; LAYER WISE; MATERIAL PROPERTIES; MAXIMUM STRESS; NAVIER-TYPE SOLUTIONS; ORTHOTOPIC; SIMPLY SUPPORTED; THICKNESS RATIOS; TSAI-WU; TWO-DIMENSIONAL MODELS; TWO-DIMENSIONAL THEORIES; ZIG ZAGS;

ASPECT RATIO; LOADING; PIEZOELECTRIC ACTUATORS; QUALITY ASSURANCE; SAFETY FACTOR; THREE DIMENSIONAL; TWO DIMENSIONAL;

FAILURE ANALYSIS;

EID: 62149088530     PISSN: 00011452     EISSN: None     Source Type: Journal    
DOI: 10.2514/1.38585     Document Type: Article

References (51)

1. Turvey, G. J., "A Study on the Onset of Flexural Failure in Cross-Ply Laminated Strips," Fibre Science and Technology, Vol. 13, No. 5, 1980, pp. 325-336. doi: 10.1016/0015-0568(80)90008-1
2. Turvey, G. J., "An Initial Flexural Failure Analysis of Symmetrically Laminated Cross-Ply Rectangular Plates," International Journal of Solids and Structures, Vol. 16, No. 5, 1980, pp. 451-463. doi: 10.1016/0020-7683(80)90043-8
3. Turvey, G. J., "Uniformly Loaded, Antisymmetric Cross-Ply Laminated, Rectangular Plates: An Initial Flexural Failure Analysis," Fibre Science and Technology, Vol. 16, No. 1, 1982, pp. 1-10. doi: 10.1016/0015-0568(82)90010-0
4. Turvey, G. J., "Initial Flexural Failure of Square, Simply Supported, Angle-Ply Plates," Fibre Science and Technology, Vol. 15, No. 1, 1981, pp. 47-63. doi:10.1016/0015-0568(81)90031-2
5. Turvey, G. J., "Flexural Failure Analysis of Angle-Ply Laminates of GFRP and CFRP," The Journal of Strain Analysis for Engineering Design, Vol. 15, No. 1, 1980, pp. 43-49. doi:10.1243/03093247V151043
6. Cauchy, A. L., "Sur l'Équilibre et le Mouvement d'une Plaque Solide," Exercises de Matematique, Vol. 3, 1828, pp. 328-355.
7. Poisson, S. D., "Mémoire sur l'Équilibre et le Mouvement des Corps Élastique," Mémoires de l'Académie des Sciences de Paris, Vol. 8, 1829, pp. 357-570.
8. Kirchhoff, G., "Über das Gleichgewicht und die Bewegung Einer Elastishen Sceibe," Journal fur die Reine und Angewandte Mathematik, Vol. 40, 1850, pp. 51-88.
9. Turvey, G. J., "Effect of Shear Deformation on the Onset of Flexural Failure in Symmetrie Cross-Ply Laminated Rectangular Plates," Composite Structures, Vol. 4, 1987, pp. 141-146.
10. Reddy, J. N., "A Simple Higher Order Theory for Laminated Composites Plates," Journal of Applied Mechanics, Vol. 51, 1984, pp. 745-752.
11. Liu, K. S., and Tsai, S. W., "A Progressive Quadratic Failure Criterion for a Laminate," Composites Science and Technology, Vol. 58, No. 7, 1998, pp. 1023-1032. doi:10.1016/S0266-3538(96)00141-8
12. Kam, T. Y., and Jan, T. B., "First-Ply Failure Analysis of Laminated Composite Plates Based on the Layerwise Linear Displacement Theory," Composite Structures, Vol. 32, Nos. 1-4, 1995, pp. 583-591. doi: 10.1016/0263-8223(95)00069-0
13. Reddy, J. N., Mechanics of Laminated Composite Plates and Shells. Theory and Analysis, 1st ed., CRC Press, Boca Raton, FL, 1997.
14. Tsai, S. W., and Wu, E. M., "A General Theory of Strength for Anisotropic Materials," Journal of Composite Materials, Vol. 5, No. 1, 1971, pp. 58-80. doi: 10.1177/002199837100500106
15. Hoffman, O., "The Brittle Strength of Orthotopic Materials," Journal of Composite Materials, Vol. 1, No. 2, 1967, p. 200. doi: 10.1177/002199836700100210
16. Kam, T. Y., Sher, H. F., Chao, T. N., and Chang, R. R., "Predictions of Deflection and First-Ply Failure Load of Thin Laminated Composites Plates via the Finite Element Approach," International Journal of Solids and Structures, Vol. 33, No. 3, 1996, pp. 375-398. doi:10.1016/0020-7683(95) 00042-9
17. Karmakar, A., and Sinha, P. K., "Impact Induced Dynamic Failure of Laminated Composite Pretwisted Rotating Plates," Aircraft Engineering and Aerospace Technology, Vol. 72, No. 2, 2000, pp. 142-155.
18. Onkar, A. K., Yadav, D., and Upadhyay, C. S., "Probabilistic Failure of Laminated Composites Plates Using the Stochastic Finite Element Method," Composite Structures, Vol. 77, No. 1, 2007, pp. 79-91. doi:10.1016/j.compstruct.2005.06.006
19. Reddy, J. N., and Pandey, A. K., "A First-Ply Failure Analysis of Composites Laminates," Computers and Structures, Vol. 25, No. 3, 1987, pp. 371-393. doi:10.1016/0045-7949(87)90130-1
20. Pandey, A. K., and Reddy, J. N., "A Post First-Ply Failure Analysis of Composites Laminates," Proceedings of the Twenty-Eighth International Conference on Structures and Structures Dynamics and Materials, AIAA, New York, 1987, pp. 788-797.
21. Reddy, Y. S. N., and Reddy, J. N., "Linear and Non Linear Failure Analysis of Composites Laminates with Transverse Shear," Composites Science and Technology, Vol. 44, No. 3, 1992, pp. 227255. doi:10.1016/0266-3538(92)90015-U
22. Reissner, E., "The Effect of Transverse Shear Deformation on the Bending of Elastic Plates," Journal of Applied Mechanics, Vol. 12, 1945, pp. 69-76.
23. Mindlin, E., "Influence of the Rotatory Inertia and Shear in Flexural Motions of Isotropic Elastic Plates," Journal of Applied Mechanics, Vol. 18, 1951, pp. 1031-1036.
24. Sih, G. C., and Skudra, A. M., Failure Mechanics of Composites, 1st ed., North-Holland, Amsterdam, 1985.
25. Soni, S. R., "A New Look at Commonly Used Failure Theories in Composite Laminates," Proceedings of the Twenty-Fourth International Conference on Structures and Structures Dynamics and Materials, AIAA, New York, 1983, pp. 171-179.
26. Soden, P. D., Hinton, M. J., and Kaddour, A. S., "A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates," Composites Science and Technology, Vol. 58, No. 7,1998, pp. 1225-1254. doi:10.1016/S0266-3538(98)00077-3
27. Hinton, M. J., and Soden, P. D., "Predicting Failure in Composite Laminates: The Background to the Exercise," Composites Science and Technology, Vol. 58, No. 7, 1998, pp. 1001-1010. doi:10.1016/S0266-3538(98) 00074-8
28. Puck, A., "A Failure Criterion Shows the Direction," Kunststoffe, Vol. 82, No. 7, 1992, pp. 29-32.
29. Puck, A., and Schürmann, H., "Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models," Composites Science and Technology, Vol. 58, No. 7, 1998, pp. 1045-1067. doi:10.1016/S0266-3538(96)00140-6
30. Puck, A., and Schürmann, H., "Failure Analysis of FRP Laminates by means of Physically based Phenomenological Models," Composites Science and Technology, Vol. 62, Nos. 12-13, 2002, pp. 1633-1662. doi:10.1016/S0266-3538(01)00208-1
31. Pinho, S. T., Dávila, C. G., Camanho, P. P., Iannucci, L., and Robinson, P., "Failure Models and Criteria for FRP Under In-Plane or Three-Dimensional Stress States Including ShearNon-Linearity," NASA TM-2005-213530, 1998, Feb. 2005.
32. Basu, S., Waas, A. M., and Ambur, D. R., "Compressive Failure of Fiber Composites Under Multi-Axial Loading," Journal of the Mechanics and Physics of Solids, Vol. 54, No. 3, 2006, pp. 611-634. doi:10.1016/j.jmps.2005.09.004
33. Basu, S., Waas, A. M., and Ambur, D. R., "A Macroscopic Numerical Model for Kink Banding Instabilities in Fiber Composites," Journal of Mechanics of Materials and Structures, Vol. 1, No. 6, 2006, pp. 979-1000.
34. Basu, S., Waas, A. M., and Ambur, D. R., "Prediction of Progressive Failure in Multidirectional Composite Laminated Panels," International Journal of Solids and Structures, Vol. 44, No. 9, 2007, pp. 2648-2676. doi:10.1016/j.ijsolstr.2006.08.010
35. 3 Hierarchy Plate Theories for Thick and Thin Composite Plates: The Generalized Unified Formulation," Composite Structures, Vol. 84, No. 3, 2008, pp. 256-270. doi: 10.1016/j.compstruct.2007.08.004
36. Reissner, E., "On a Certain Mixed Variational Theorem and a Proposed Application," International Journal of Numerical Methods in Engineering, Vol. 20, No. 7, 1984, pp. 1366-1368. doi:10.1002/nme.1620200714
37. 0 Requirements for the Two Dimensional Analysis of Multilayered Structures," Composite Structures, Vol. 37, Nos. 3-4, 1997, pp. 373-383. doi:10.1016/S0263-8223(98) 80005-6
38. Murakami, M., "Laminated Composites Plate Theory with Improved In-Plane Response," Journal of Applied Mechanics, Vol. 53, No. 3, 1986, pp. 661-666.
39. Carrera, E., "Historical Review of Zig-Zag Theories for Multilayered Plates and Shells," Applied Mechanics Reviews, Vol. 56, No. 3, 2003, pp. 287-308. doi:10.1115/1.1557614
40. Carrera, E., "On the Use of Murakami's Zig-Zag Function in the Modeling of Layered Plates and Shells," Computers and Structures, Vol. 82, No.7, 2004, pp. 541-554. doi: 10.1016/j.compstruc.2004.02.006
41. Carrera, E., "Theories and Finite Elements for Multilayered Plates and Shells: A Unified Compact Formulation with Numerical Assessment and Benchmarking," Archives of Computational Methods in Engineering, Vol. 10, No. 3, 2003, pp. 215-296. doi:10.1007/BF02736224
42. Carrera, E., and Giunta, G., "Hierarchical Closed Form Solutions for Plates Bent by Localized Transverse Loadings," Journal of Zhejiang University-Science A, Vol. 8, 2007, pp. 1026-1037. doi:10.1631/JZUS.2007. A1026
43. Carrera, E., and Giunta, G., "Hierarchical Models for Failure Analysis of Plates Bent by Distributed and Localized Transverse Loadings," Journal of Zhejiang University-Science A, Vol. 9, No. 5, 2008, pp. 600-613. doi:10.1631/jzus.A072110
44. Carrera, E., and Ciuffreda, A., "Bending of Composites and Sandwich Plates Subjected to Localized Lateral Loadings: A Comparison of Various Theories," Composite Structures, Vol. 68, No. 2, 2005, pp. 185-202. doi:10.1016/j.compstruct.2004.03.013
45. Carrera, E., and Ciuffreda, A., "A Unified Formulation to Assess Theories of Multilayered Plates for Various Bending Problems," Composite Structures, Vol. 69, No. 3, 2005, pp. 271-293. doi:10.1016/j.compstruct. 2004.07.003
46. Carrera, E., and Demasi, L., "Two Benchmarks to Assess Two-Dimensional Theories of Sandwich, Composites Plates," AIAA Journal, Vol. 41, No. 7, 2003, pp. 1356-1362. doi: 10.2514/2.2081
47. Hashin, Z., "Failure Criteria for Unidirectional Fiber Composites," Journal of Applied Mechanics, Vol. 47, 1980, pp. 329-334.
48. Pagano, N. J., "Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates," Journal of Composite Materials, Vol. 4, No. 1, 1970, pp. 20-34. doi:10.1177/002199837000400102
49. Touratier, M., "An Efficient Standard Plate Theory," International Journal of Engineering Science, Vol. 29, No. 8, 1991, pp. 901-916. doi:10.1016/0020-7225(91)90165-Y
50. Soldatos, K. P., "A Transverse Shear Deformation Theory for Homogeneous Monoclinic Plates," Acta Mechanica, Vol. 94, No. 3-4, 1992, pp. 195-220. doi:10.1007/BF01176650
51. Carrera, E., "A Priori vs a Posteriori Evaluation of Transverse Stresses in Multilayered Orthotopic Plates," Composite Structures, Vol. 48, No. 4, 2000, pp. 245-260. doi:10.1016/S0263-8223(99)00112-9