High temperature strength and failure of the Ni-base superalloy PM 3030

International Journal of Plasticity

Volumn 25, Issue 5, 2009, Pages 822-837

  Nganbe, Michel ^a   Heilmaier, Martin ^b  

^a UNIVERSITY OF OTTAWA   (Canada)

^b OTTO VON GUERICKE UNIVERSITY   (Germany)

Author keywords

Fatigue; Fracture; Microstructure; Optimization; Strengthening mechanisms

Indexed keywords

ASPECT RATIO; COMPRESSIVE STRENGTH; CRACKS; CREEP; FATIGUE OF MATERIALS; FRACTURE; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; MECHANISMS; MICROSTRUCTURE; NICKEL; NICKEL ALLOYS; NICKEL OXIDE; OPTICAL MICROSCOPY; PERMANENT MAGNETS; PRECIPITATION (CHEMICAL); REAL TIME SYSTEMS; STRAIN RATE; STRENGTHENING (METAL); SUPERALLOYS; SUPERCONDUCTING WIRE; TENSILE TESTING; TRANSMISSION ELECTRON MICROSCOPY;

COARSE GRAINS; COARSE PARTICLES; CONSTANT STRAIN RATE TESTS; CREEP PROPERTIES; DIFFUSIONAL CREEPS; ELONGATED GRAINS; ELONGATION TO FAILURES; FATIGUE; FATIGUE LIVES; FATIGUE PERFORMANCE; FINE GRAINS; FRACTURE BEHAVIORS; GRAIN ASPECT RATIOS; GRAIN ORIENTATIONS; GRAIN SIZES; GRAIN-SIZE REDUCTIONS; HIGH AL CONTENTS; HIGH CYCLE FATIGUES; HIGH-TEMPERATURE STRENGTHS; HIGHER TEMPERATURES; MEAN-GRAIN SIZES; MECHANICAL METALLURGIES; NI-BASE ALLOYS; NI-BASE SUPERALLOYS; NICKEL-BASE ALLOYS; NICKEL-BASE SUPERALLOYS; OXIDE DISPERSION STRENGTHENED; OXIDE PARTICLES; PRECIPITATION-STRENGTHENING; PREMATURE CRACKS; QUASI-STATIC STRENGTHS; SCANNING AND TRANSMISSION ELECTRON MICROSCOPIES; SEM AND TEM; STRENGTHENING MECHANISMS; STRESS AMPLITUDES; TENSILE TESTS; ULTIMATE COMPRESSIVE STRENGTHS;

GRAIN BOUNDARY SLIDING;

EID: 61849138355     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.06.005     Document Type: Article

References (42)

1. Albrecht J. Comparing fatigue behaviour of titanium and nickel-base alloys. Mater. Sci. Eng. A 263 (1999) 176-186
2. Arzt E. Creep of dispersion strengthened materials: a critical assessment. Res. Mech. 31 (1991) 399-453
3. Arzt E., and Ashby M.F. Threshold stresses in materials containing dispersed particles. Scripta Mater. 16 (1982) 1285-1290
4. Arzt E., and Rösler J. The kinetics of dislocation climb over hard particles. 2. Effect of an attractive particle dislocation interaction. Acta Metall. 36 (1988) 1053-1060
5. Arzt E., and Wilkinson D.S. Threshold stresses for dislocation climb over hard particles: the effect of an attractive interaction. Acta Metall. 34 (1986) 1893-1898
6. Bayerlein, U., 1991. Zur Ermittlung der Textur- und Gefügeabhängigkeit der elastischen Eigenschaften sowie der Einkristallkonstanten von Superlegierungen bei höheren Temperaturen. VDI Fortschrifttsberichte, Reihe 5, Nr. 236.
7. 3Al alloys. Scripta Metall. 36 (1997) 341-345
8. Benjamin J.S. Dispersion strengthened superalloys by mechanical alloying. Metall. Trans. 1 (1970) 2943-2951
9. Benjamin J.S., and Bomford M.J. Effect of yttrium oxide volume fraction and particle size on elevated temperature strength of dispersion strengthened superalloys. Metall. Trans. 5 (1974) 615-621
10. Bernstein H.L. An evaluation of four creep-fatigue models for a nickel-base superalloy. Low-Cycle Fatigue and Life Prediction (1982), ASM, Philadelphia 105-134
11. Biermann, H., 1999. Ursachen und Auswirkungen der Gerichteten Vergröberung ("Flossbildung") in Einkristallinen Nickelbasis-Superlegierungen. Habilitation Thesis, University of Erlangen.
12. Cairns R.L., Curwick L.R., and Benjamin J.S. Grain growth in dispersion strengthened superalloys by moving zone heat treatments. Metall. Trans. 6A (1975) 179-188
13. 3Al (phase). Trans. Metall. Soc. AIME 239 (1967) 977-984
14. Copley S.M., and Kear B.H. A dynamic theory of coherent precipitation hardening with application to nickel-base superaloys. Trans. Metall. Soc. AIME 239 (1967) 984-992
15. deMestral B., Eggeler G., and Klam H.-J. On the influence of grain morphology on the creep deformation and damage mechanisms in directionally solidified and oxide dispersion strengthened superalloys. Metall. Mater. Trans. 27A (1996) 879-890
16. Dieter G.E. Mechanical Metallurgy. SI Metric ed (1986), McGraw-Hill Book Company, London
17. Estrin Y., Heilmaier M., and Drew G. Creep properties of an oxide dispersion strengthened nickel-base alloy: the effect of grain orientation and grain aspect ratio. Mater. Sci. Eng. A 272 1 (1999) 163-173
18. Frost H.J., and Ashby M.F. Deformation-Mechanism-Maps. The Plasticity and Creep of Metals and Ceramics (1982), Pergamon Press, Oxford
19. Hall, E.O., 1951. The deformation of mild steel: III discussion of results. In: Proceedings of the Physical Society of London, vol. 643. pp. 747-753.
20. Heilmaier, M., 1992. Modellkompatible Berechnung des Kriech- und Zeitstandverhaltens oxid-dispersionsgehärter Nickelbasisisuperlegierungen. Dissertation Thesis, University of Erlangen.
21. Heilmaier M., and Reppich B. Creep lifetime prediction of oxide dispersion strengthened nickel-base superalloys: a micromechanically based approach. Metall. Mater. Trans. 27A (1996) 3861-3870
22. Heilmaier M., and Reppich B. Particle threshold stresses in high temperatures yielding and creep: a critical review. The Minerals, Metals and Materials Society: Creep Behavior of Advanced Materials for the 21th Century (1999), TMS, Warrendale 267-281
23. Heilmaier M., Leetz U., and Reppich B. Order strengthening in the cast nickel-based superalloy IN 100 at room temperature. Mater. Sci. Eng. (2001) 375-378
24. Hotzler R.K., and Glasgow T.K. The Influence of γ′ on the recrystallization of an oxide dispersion strengthened superalloy - MA6000E. Metal. Trans. 13A (1982) 1665-1674
25. Kassner M.E., and Hayes T.A. Creep cavitation in metals. Int. J. Plast. 20 (2002) 1715-1748
26. 3Au alloys. Trans. AIME 224 (1962) 382-386
27. Khraishi T.A., Yan L., and Shen Y.-L. Dynamic simulations of the interaction between dislocations and dilute particle concentrations in metal-matrix composites (MMCs). Int. J. Plast. 20 (2004) 1039-1057
28. Kocks U.F. The theory of an obstacle-controlled yield strength. Mater. Sci. Eng. 27 (1977) 291-298
29. Kubin L.P., Lisiecki B., and Garon P. Octahedral slip instabilities in γ/γ′ superalloys single crystals CMSX and AM3. Philos. Mag. A 71 (1995) 991-1009
30. Morris D.G., Gutierrez-Urrutia I., and Muñoz-Morris M.A. High temperature creep behaviour of an FeAl intermetallic strengthened by nanoscale oxide particles. Int. J. Plast. 24 (2008) 1205-1223
31. Nabarro F.R.N., and Villiers H.L. The Physics of Creep: Creep and Creep-Resistant Alloys (1995), Taylor and Francis, London
32. 2 Ordered Alloys vol. 10 (1996), North-Holland Publishing company, Amsterdam
33. Nganbe, M., 2002. Untersuchung und Optimierung der γ′- und Oxiddispersionsgehärteten (ODS) Nickelbasissuperlegierung PM 3030. Dissertation Thesis, University of Dresden.
34. Nganbe M., and Heilmaier M. Modelling of particle strengthening in the γ′ and oxide dispersion strengthened nickel-base superalloy PM3030. Mater. Sci. Eng. (2004) 609-612
35. Petch N.J. The cleavage strength of polycrystals. J. Iron Steel Inst. 174 (1953) 25-28
36. Raj R., and Ashby M.F. On the grain boundary sliding and diffusional creep. Metall. Trans. 2 (1971) 1113-1127
37. Rees D.W.A., and Dyson B.F. Deformation and fracture behaviour under combined creep and fatigue. Int. J. Plast. 2 (1986) 1-19
38. Reppich B. On the attractive particle-dislocation interaction in dispersion-strengthened materials. Acta Mater. 46 (1998) 61-67
39. Spingarn J.R., and Nix W.D. Diffusional creep and diffusionally accommodated grain rearrangement. Acta Metall. 26 (1978) 1389-1398
40. Stevens J.J., and Nix W.D. The effect of grain morphology on longitudinal creep properties of INCONEL MA 754 at elevated temperature. Metall. Mater. Trans. 16A (1985) 1307-1324
41. Stickforth J. On stress relaxation, creep, and plastic flow. Int. J. Plast. 2 (1986) 347-357
42. Yashiro K., Kurose F., Nakashima Y., Kubo K., Tomita Y., and Zbib H.M. Discrete dislocation dynamics simulation of cutting of γ′ precipitate and interfacial dislocation network in Ni-based superalloys. Int. J. Plast. 22 (2006) 713-723