Effect of biodiesel derived from Honge oil and its blends with diesel when directly injected at different injection pressures and injection timings in single-cylinder water-cooled compression ignition engine

Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy

Volumn 223, Issue 1, 2009, Pages 31-40

  Banapurmath, N R ^a   Tewari, P G ^a   Hosmath, R S ^a  

^a KLE TECHNOLOGICAL UNIVERSITY   (India)

Author keywords

Alternative fuel; Emissions; Honge oil; Honge oil methyl ester

Indexed keywords

ALTERNATIVE FUELS; CYLINDERS (SHAPES); DIESEL ENGINES; DIESEL FUELS; ENGINE CYLINDERS; ESTERIFICATION; ESTERS; IGNITION; OIL WELL PRODUCTION; WATER INJECTION;

COMBUSTION DURATIONS; COMPRESSION IGNITION ENGINES; CONSTANT SPEED; CUMULATIVE HEATS; DIRECT INJECTION DIESEL ENGINES; EMISSIONS; HEAT RELEASE RATES; HIGH INJECTIONS; HONGE OIL; HONGE OIL METHYL ESTER; IGNITION DELAYS; INJECTION PRESSURES; INJECTION TIMINGS; PEAK PRESSURES; PERFORMANCE AND EMISSIONS; RATE OF PRESSURES; TOP DEAD CENTRES;

LEAKAGE (FLUID);

EID: 61849137690     PISSN: 09576509     EISSN: None     Source Type: Journal    
DOI: 10.1243/09576509JPE673     Document Type: Article

References (26)

1. Srivastava, A. and Prasad, R. Triglycerides-based diesel fuels. Renew. Sustain. Energy Rev., 2000, 4, 111-133.
2. Vellguth, G. Performance of vegetable oils and their monoesters as fuels for diesel engines. SAE paper no-831358, 1983.
3. Altin, R., Cetinkaya, S., and Yucesu, H. S. The potential of using vegetable oil fuels as fuel for diesel engines. Int. J. Energy Convers. Manage., 2000, 42, 529-538.
4. Pramanik, K. Properties and use of Jatropha curcas oil and diesel fuel blends in compression ignition engine. Int. J. Renew. Energy, 2003, 28, 239-248.
5. Gajendra Babu, M. K. Studies on performance and exhaust emissions of a CI engine operating on diesel and diesel biodiesel blends at different injection pressures and injection timings. SAE paper 2007-01-0613, 2007.
6. Ramadhas, A. S., Jayaraj, S., and Muraleedharan, C. Characterization and effect of using rubber seed oil as fuel in the compression ignition engines. Renew. Energy, 2005, 30, 795-803.
7. Altin, R., Cetinkaya, S., and Yucesu, H. S. The potential of using vegetable oil fuels as fuel for diesel engines. Energy Convers. Manage., 2001, 42, 529-538.
8. Karabektas, M., Ergen, G., and Hosoz, M. The effects of preheated cottonseed oil methyl ester on the performance and exhaust emissions of a diesel engine. Appl. Therm. Eng., 2007, 28(17-18), 2136-2143.
9. Nwafor, M. I. The effect of elevated fuel inlet temperature on performance of diesel engine running on neat vegetable oil at constant speed conditions. Renew. Energy, 2003, 28, 171-181.
10. Agarwal, A. K. and Rajamanoharan, K. Experimental investigations of performance and emissions of Karanja oil and its blends in a single cylinder agricultural diesel engine. Appl. Energy, 2008, 86, 106-112.
11. Lapuerta, M., Armas, O., and García-Contreras, R. Stability of diesel-bioethanol blends for use in diesel engines. Fuel, 2008, 87(10-11), 1982-1988.
12. Ji-Yeon Park, Deog-Keun Kim, Joon-Pyo Lee, Soon-Chul Park, Young-Joo Kim, and Jin-Suk Lee. Blending effects of biodiesels on oxidation stability and low temperature flow properties. Bioresource Technol., 2008, 99(5), 1196-1203.
13. Pramanik, K. Properties and use of Jatropha cureas oil and diesel fuel blends in compression ignition engine. Fuel Energy, 2003, 44(3), 170.
14. Baiju, B., Das, L. M., and Gajendra Babu, M. K. Experimental investigations on a rubber seed oil methylester-fueled compression ignition engine. SAE paper 2008-28-0073, 2008.
15. Bhatti, H. N., Hanif, M. A., Qasim, M., and Rehman, A. Biodiesel production from waste tallow. Fuel, 2008, 87(13-14), 2961-2966.
16. Sureshkumar, K., Velraj, R., and Ganesan, R. Performance and exhaust emission characteristics of a CI engine fueled with Pongamia pinnata methyl ester (PPME) and its blends with diesel. Renew. Energy, 2008, 33(10), 2294-2302.
17. Raheman, H. and Ghadge, S. V. Performance of diesel engine with biodiesel at varying compression ratio and ignition timing. Fuel, 2008, 87(12), 2659-2666.
18. Udu, Z. and Koçak, M. S. The effect of biodiesel fuel obtained from waste frying oil on direct injection diesel engine performance and exhaust emissions. Renew. Energy, 2008, 33(8), 1936-1941.
19. Demirbas, A. Biodiesel production from vegetable oils via catalytic and non-catalytic supercritical methanol transesterification methods. Int. J. Prog. Energy Combust. Sci., 2005, 31, 466-487.
20. Banapurmath, N. R. and Tewari, P. G. Combustion and emission characteristics of a direct injection CI engine when operated on Honge oil, Honge oil methyl ester (HOME) and blends of Honge oil methyl ester (HOME) and diesel. Int. J. Sustain. Energy, 2008, 1 (2), 80-93.
21. Brunt, M. F. J. and Platts, K. Calculation of heat release rate in direct injection diesel engines. SAE paper 1999-01-0187, 1999.
22. Hayes, T. K., Savage, L. D., and Soreson, S. C. Cylinder pressure data acquisition and heat release analysis on a personal computer. SAE paper 860029, 1986.
23. Rakopoulos, C. D., Antonopoulos, K. A., and Rakopoulos, D. C. Experimental heat release analysis and emissions of a HSDI diesel engine fueled with ethanol-diesel fuel blends. Energy, 2007, 32, 1791-1808.
24. Homsy, S. C. and Atreya, A. An experimental heat release rate analysis of a diesel engine operating under steady state conditions. SAE paper 970889, 1997.
25. Brown, B. R. Combustion data acquisition and analysis. Final Year Project, M.Eng. Automotive Engineering, Department of Aeronautical, Loughborough University.
26. Heywood, J. B. Internal combustion engine fundamentals, 1988 (McGraw Hill Book Co., New York).