Carbonation rate and reinforcing steel corrosion rate of OPC/FC3R/FA mortars under accelerated conditions

Advances in Cement Research

Volumn 21, Issue 1, 2009, Pages 15-22

  Zornoza, E ^a   Paya J ^a   Garces P ^b  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

^b UNIVERSITY OF ALICANTE   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

ATMOSPHERIC CORROSION; CARBONATION; CEMENT MANUFACTURE; CORROSION RATE; CORROSION RESISTANCE; CRACKING (CHEMICAL); ELECTROCHEMICAL CORROSION; FLUID CATALYTIC CRACKING; FLUIDIZATION; FLUIDIZED BEDS; FLY ASH; PLASTER; PLASTICIZERS; PORTLAND CEMENT;

ACCELERATED TESTS; CARBONATION PROCESS; DEPASSIVATION; FLUIDISED BEDS; LIMITING FACTORS; PLASTICISER; POLARISATION; RESISTANCE TECHNIQUES;

MORTAR;

EID: 61849124758     PISSN: 09517197     EISSN: 17517605     Source Type: Journal    
DOI: 10.1680/adcr.2007.00008     Document Type: Article

References (25)

1. PAYÁ J., MONZÓ J., BORRACHERO M. V. and VELÁZQUEZ S. Evaluation of the pozzolanic activity of fluid catalytic cracking residue (FCC): thermogravimetric analysis studies on FCC-Portland cement pastes. Cement and Concrete Research, 2003, 33, No. 4, 603-609.
2. PAYÁ J., MONZÓ J., BORRACHERO M. V., VELÁZQUEZ S. and BONILLA M. Determination of the pozzolanic activity of fluid catalytic cracking residue. Thermogravimetric analysis studies on FC3R-lime pastes. Cement and Concrete Research, 2003, No. 7, 33, 1085-1091.
3. PAYÁ J., MONZÓ J. and BORRACHERO M. V. Fluid catalytic cracking catalyst residue (FC3R): an excellent mineral byproduct for improving early-strength development of cement mixtures. Cement and Concrete Research, 1999, 29, No. 11, 1773-1779.
4. CHEN H.-L., TSENG Y.-S. and HSU K.-C. Spent FCC catalyst as a pozzolanic material for high-performance mortars. Cement and Concrete Composites, 2004, 26, No. 6, 657-664.
5. WU J.-H., WU W.-L. and HSU, K.-C. The effect of waste oil-cracking catalyst on the compressive strength of cement pastes and mortars. Cement and Concrete Research, 2003, 33, No. 2, 245-253.
6. WU W.-L., WU J.-H., HSU K.-C. and YEN D.-S. Subproducto del fraccionamiento catalítico del petróleo: características, actividad puzolánica y su efecto en las propiedades del mortero. Cemento Hormigón, 2003, 850, No. 6, 18-25.
7. HSU K.-C., TSENG Y.-S., KU F.-F. and SU N. Oil cracking waste catalyst as an active pozzolanic material for superplasticized mortars. Cement and Concrete Research, 2001, 31, No. 12, 1815-1820.
8. PAYÁ J., MONZÓ J., BORRACHERO M. V., AMAHJOUR F., GIRBÉS I., VELÁZQUEZ S. and ORDÓNEZ L. M. Advantages in the use of fly ashes in cements containing pozzolanic combustion residues: silica fume, sewage sludge ash, spent fluidized bed catalyst and rice husk ash. Journal of Chemical Technology and Biotechnology, 2002, 77, No. 3, 331-335.
9. PACEWSKA B., WILINSKA I., BUKOWSKA M. and NOCUNWCZELIK W. Effect of waste aluminosilicate material on cement hydration and properties of cement mortars. Cement and Concrete Research, 2002, 32, No. 11, 1823-1830.
10. PACEWSKA B., BUKOWSKA M., WILINSKA I. and SWAT M. Modification of the properties of concrete by a new pozzolan: a waste catalyst from the catalytic process in a fluidized bed. Cement and Concrete Research, 2002, 32, No. 1, 145-152.
11. ANDRADE C. Effect of fly ash in concrete on the corrosion of steel reinforcement. Proceedings of Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete (CANMET/ACI), 1986, vol. 1, 609-620. American Concrete Institute, Detroit.
12. JIANG L., LIN B. and CAI Y. A model for predicting carbonation of high-volume fly ash concrete. Cement and Concrete Research, 2000, 30, 699-702.
13. PAYÁ J., MONZÓ J., BORRACHERO M. V. and PERIS-MORA E. Mechanical treatment of fly ashes. Part I: physico-chemical characterization of ground fly ashes. Cement and Concrete Research, 1995, 25, No. 7, 1469-1479.
14. PAYÁ J., MONZÓ J., BORRACHERO M. V., PERIS-MORA E. and GONZALEZ-LOPEZ E. Mechanical treatment of fly ashes. Part II: particle morphologies in ground fly ashes (GFA) and workability of GFA-cement mortars. Cement and Concrete Research, 1996, 26, No. 2, 225-235.
15. PAYA J., MONZÓ J., BORRACHERO M. V. and PERIS-MORA E. Comparisons among magnetic and non-magnetic fly ash fractions: strength development of cement-fly ash mortars. Waste Management, 1996, 16, Nos 1-3, 119-124.
16. PAYÁ J., MONZÓ J., BORRACHERO M. V., PERIS-MORA E. and GONZÁLEZ- LÓPEZ E. Mechanical treatment of fly ashes. Part III: studies on strength development of ground fly ashes (GFA)-cement mortars. Cement and Concrete Research, 1997, 27, No. 9, 1365-1377.
17. PAYÁ J., MONZÓ J., BORRACHERO M. V., PERIS-MORA E. and AMAHJOUR F. Mechanical, treatment of fly ashes. Part IV: strength development of ground fly ash cement mortars cured at different temperatures. Cement and Concrete Research, 2000, 30, No. 4, 543-551.
18. Spanish Standard UNE/112011:1994. Assembly Corrosion. Determination of Carbonation Depth for In-Service Concrete.
19. European Standard UNE-EN 196-1:1996. Methods of Testing Cement - Part 1: Determination of Strength.
20. Spanish Standard UNE-EN. 1097-6:2000. Test for Mechanical and Physical Properties of Aggregates. Part 6: Determination of Particle Density and Water Absorption.
21. STERN M. and GEARY A. L. A theoretical analysis of the shape of polarization curves. Journal of the Electrochemistry Society, 1957, 104, No. 1, 56-67.
22. STERN M. and WEISERT E. D. Experimental observations on the relations between polarization resistance and corrosion rate. Proceedings of the American Society of Test Materials, 1958, 59, 1280
23. ANDRADE C. and GONZÁLEZ J. A. Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements. Werkstoffe und Korrosion, 1978, 29, No. 8, 515-519.
24. ANDRADE C. and ALONSO C. Corrosion rate monitoring in the laboratory and on-site. Construction and Building Materials, 1996, 10, No. 5, 315-328.
25. ANDRADE C. and GONZALEZ J. A. Techniques electrochimiques qualitatives et quantitatives pour mesurer les effects des additions sur la corrosion des armatures. Silicates Industriels, 1982, 47, No. 3, 289-295.