A new version of the Neuber rule accounting for the influence of the notch opening angle for out-of-plane shear loads

International Journal of Solids and Structures

Volumn 46, Issue 9, 2009, Pages 1901-1910

  Zappalorto, Michele ^a   Lazzarin, Paolo ^a  

^a UNIVERSITY OF PADOVA   (Italy)

Author keywords

Neuber rule; Nonlinear material; Notch; Notch stress intensity factor; Stress concentration factor

Indexed keywords

ASPHALT PAVEMENTS; FATIGUE OF MATERIALS; LINEAR SYSTEMS; NONLINEAR EQUATIONS; STRESS CONCENTRATION; STRESS INTENSITY FACTORS;

NEUBER RULE; NONLINEAR MATERIAL; NOTCH; NOTCH STRESS INTENSITY FACTOR; STRESS CONCENTRATION FACTOR;

WELDS;

EID: 61749089269     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2009.01.003     Document Type: Article

References (40)

1. Abramowitz M., and Stegun I.H. Handbook of Mathematical Functions (1972), Dover, New York
2. Bäumel, A., Seeger, T., 1990. Materials Data for Cyclic Loading, Suppl. 1. Elsevier, Amsterdam.
3. Champion C.R., and Atkinson C. On a crack in a material with a nonlinear stress-strain law. Proc. R. Soc. Lond. A 441 (1993) 377-386
4. Ellyin F. Fatigue Damge, Crack Growth and Life Prediction (1997), Chapman & Hall, London
5. Ellyin F., and Kujawski D. Generalization of notch analysis and its extension to cyclic loading. Engng. Fract. Mech. 32 (1989) 819-826
6. Filippi S., Lazzarin P., and Tovo R. Developments of some explicit formulas useful to describe elastic stress fields ahead of notches in plates. Int. J. Solids Struct. 39 (2002) 4543-4565
7. Forsyth A.R.A. Treatise on Differential Equations (1996), Dover, New York
8. Glinka G. Energy density approach to calculation of inelastic strain-stress near notches and cracks. Engng. Fract. Mech. 22 (1985) 485-508
9. Glinka G. Calculation of inelastic notch-tip strain-stress histories under cyclic loading. Engng. Fract. Mech. 22 (1985) 839-854
10. Glinka G., Ott W., and Nowack H. Elastoplastic plane strain analysis of stresses and strains at the notch root. J. Engng. Mater. Tech. 110 (1988) 195-204
11. Guo, W., Wang, C.H., Rose L.R.F., 1998. Elastoplastic analysis of notch-tip fields in strain hardening materials. Report DSTO-RR-0137, DSTO Aeronautical and Maritime Research Laboratory, Melbourne, Vic., Australia.
12. Hoffmann M., and Seeger T. A generalized method for estimating multiaxial elastic-plastic notch stresses and strains. Part I: Theory/ Part II: Application and general discussion. J. Engng. Mater. Technol. (Trans. ASME) 107 10 (1985) 250-260
13. Hult, J.A.H., McClintock, F.A., 1956. Elastic-plastic stress and strain distribution around sharp notches under repeated shear. In: Proc. of the 9th Int. Cong. Appl. Mech., vol. 8, Brussels.
14. Jiang Y., and Xu B. Deformation analysis of notched components and assessment of approximate methods. Fatigue Fract. Engng. Mater. Struct. 24 (2001) 729-740
15. Knop M., Jones R., Molent L., and Wang C. On the Glinka and Neuber methods for calculating notch tip strains under cyclic load spectra. Int. J. Fatigue 22 (2000) 743-755
16. Lazzarin P., and Tovo R. A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notches. Int. J. Fract. 78 (1996) 3-19
17. Lazzarin P., and Zambardi R. A finite-volume-energy based approach to predict the static and fatigue behaviour of components with sharp V-shaped notches. Int. J. Fract. 112 (2001) 275-298
18. Lazzarin P., and Zambardi R. The equivalent strain energy density approach re-formulated and applied to sharp V-shaped notches under localized and generalized plasticity. Fatigue Fract. Engng. Mater. Struct. 25 (2002) 917-928
19. Lazzarin P., and Filippi S. A generalised stress intensity factor to be applied to rounded V-shaped notches. Int. J. Solids Struct. 43 (2006) 2461-2478
20. Lazzarin P., and Berto F. Control volumes and strain energy density under small and large scale yielding due to tension and torsion loading. Fatigue Fract. Engng. Mater. Struct. 31 (2008) 95-107
21. Moftakhar A., Buczynski A., and Glinka G. Calculation of elasto-plastic strains and stresses in notches under multiaxial loading. Int. J. Fract. 70 (1995) 357-372
22. Molski K., and Glinka G. A method of elastic-plastic stress and strain calculation at a notch root. Mater. Sci. Engng. 50 (1981) 93-100
23. Neuber H. Theory of Notch Stresses (1958), Splinger, Berlin
24. Neuber H. Theory of stress concentration for shear-strained prismatical bodies with arbitrary nonlinear stress-strain law. J. Appl. Mech. 28 (1961) 544-550
25. Neuber H. A physically nonlinear notch and crack model. J. Mech. Phys. Solids 16 (1968) 289-294
26. Rice, J.R., 1967a. Mechanics of crack tip deformation and extension by fatigue. In: Fatigue Crack propagation, ASTM STP 415, American Society for Testing and Materials, Philadelphia, PA, pp. 247-311.
27. Rice J.R. Stresses due to a sharp notch in a work-hardening elastic-plastic material loaded by longitudinal shear. J. Appl. Mech. 34 (1967) 287-298
28. Sanford R.J. Principles of Fracture Mechanics (2003), Prentice-Hall, Englewood Cliffs, NJ
29. Seeger, T., 1996. Grundlagen für Betriebsfestigkeitsnachweise (Fundamentals for service fatigue strength assessment). Stahlbau Hanbuch, Köln, Stahlbau-Verlagsges, vol. 1B, pp. 5-13.
30. Shin, C.S., 1994. Fatigue crack growth from stress concentrations and fatigue life predictions in notched components. In: Carpinteri An (Ed.). Handbook of Fatigue Crack Propagation in Metallic Structures. Elsevier, Amsterdam, pp. 613-652.
31. Topper T.H., Wetzel R.M., and Morrow J. Neuber's rule applied to fatigue of notched specimens. J. Mater. 4 1 (1969) 200-209
32. Visvanatha S.K., Straznicky P.V., and Hewitt R.L. Influence of strain estimation methods on life predictions using the local strain approach. Int. J. Fatigue 22 (2000) 675-681
33. Vivio F., and Vullo V. Elastic stress analysis of rotating converging conical disks subjected to thermal load and having variable density along the radius. Int. J. Solids Struct. 44 (2007) 7767-7784
34. Vullo V., and Vivio F. Elastic stress analysis of non-linear variable thickness rotating disks subjected to thermal load and having variable density along the radius. Int. J. Solids Struct. 45 (2008) 5337-5355
35. Williams M.L. Stress singularities resulting from various boundary conditions in angular corners of plate in extension. J. Appl. Mech. 19 (1952) 526-528
36. Ye D., Matsuoka S., Suzuki N., and Maeda Y. Further investigation of Neuber's rule and the equivalent strain energy density (ESED) method. Int. J. Fatigue 26 (2004) 447-455
37. Ye D., Hertel O., and Vormwald M. A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading. Int. J. Solids Struct. (2008) 10.1016/j.ijsolstr.2008.07.012
38. Yosibash Z., Bussiba A.R., and Gilad I. Failure criteria for brittle elastic materials. Int. J. Fract. 125 (2004) 307-333
39. Zappalorto M., and Lazzarin P. Analytical study of the elastic-plastic stress fields ahead of parabolic notches under antiplane shear loading. Int. J. Fract. 148 (2007) 139-154
40. Zappalorto M., Lazzarin P., and Yates J.R. Elastic stress distributions resulting from hyperbolic and parabolic notches in round shafts under torsion and uniform antiplane shear loadings. Int. J. Solids Struct. 45 (2008) 4879-4901