Finite-deformation analysis of the crack-tip fields under cyclic loading

International Journal of Solids and Structures

Volumn 46, Issue 9, 2009, Pages 1937-1952

  Toribio, J ^a   Kharin, V ^a  

^a UNIVERSITY OF SALAMANCA   (Spain)

Author keywords

Crack tip; Elastoplasticity; Fatigue; Finite elements; Large deformations

Indexed keywords

CRACK TIPS; CRACKING (CHEMICAL); CYCLIC LOADS; DEFORMATION; ELASTICITY; ELASTOPLASTICITY; FATIGUE CRACK PROPAGATION; FATIGUE DAMAGE; PLASTIC FLOW; PLASTICITY; PLASTICS; UNLOADING;

BOND-BREAKING; CRACK ADVANCES; CRACK GROWTHS; CRACK TIP; CRACK-TIP FIELDS; CRACK-TIP OPENING DISPLACEMENTS; CYCLIC LOADINGS; DAMAGE ACCUMULATIONS; DEFORMATION ANALYSIS; DIRECT DRIVES; FATIGUE; FATIGUE CRACK GROWTH RATES; FATIGUE CRACKINGS; FINITE ELEMENTS; LARGE DEFORMATIONS; LOAD RANGES; LOAD RATIOS; LOADING PARAMETERS; LOADING REGIMES; NEAR-TIP STRESS; PLANE STRAINS; RE-SHARPENING; SELF-SIMILAR; SMALL-SCALE YIELDING; STRESS-STRAIN FIELDS; TIP DEFORMATIONS;

CRACK CLOSURE;

EID: 61749086505     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2009.01.006     Document Type: Article

References (68)

1. Amazigo J.C., and Hutchinson J.W. Crack-tip fields in steady crack-growth with linear strain hardening. Journal of the Mechanics and Physics of Solids 25 (1977) 81-97
2. Atkins A.G., and Mai Y.-W. Elastic and Plastic Fracture (1988), Ellis Horwood, Chichester
3. Borja R.I. Bifurcation of elastoplastic solids to shear band mode at finite strain. Computer Methods in Applied Mechanics and Engineering 191 (2002) 5287-5314
4. Chan K.S., and Lankford J. A crack tip strain model for the growth of small fatigue cracks. Scripta Metallurgica 17 (1983) 529-532
5. Cherepanov, G.P., 1974. Mechanics of Brittle Fracture. Nauka, Moscow (in Russian; English translation: McGraw-Hill, New York, 1979).
6. Deshpande V.S., Needleman A., and van der Giessen E. A discrete dislocation analysis of near-threshold fatigue crack growth. Acta Materialia 49 (2001) 3189-3203
7. Ellyin F., and Wu J. Elastic-plastic analysis of a stationary crack under cyclic loading and effect of overload. International Journal of Fracture 56 (1992) 189-208
8. Fleck N.A. Finite element analysis of plasticity-induced crack closure under plane strain conditions. Engineering Fracture Mechanics 25 (1986) 441-449
9. Gdoutos E.E. Fracture Mechanics: An Introduction (1993), Kluwer Academic Publishers, Dordrecht
10. Gortemaker P.C.M., de Pater C., and Spiering R.M.E.J. Near-crack tip finite strain analysis. Advances in Fracture Research. Proceedings of the Fifth International Conference on Fracture, Cannes vol. 1 (1981), Pergamon Press, Oxford 151-160
11. Gullerud A.S., Gao X., Dodds R.H., and Haj-Ali R. Simulation of ductile crack growth using computational cells: numerical aspects. Engineering Fracture Mechanics 66 (2000) 65-92
12. Handerhan K.J., and Garrison Jr. W.M. A study of crack tip blunting and the influence of blunting behavior on the fracture toughness of ultra high strength steels. Acta Metallurgica et Materialia 40 (1992) 1337-1355
13. Hertzberg R.W. Deformation and Fracture Mechanics of Engineering Materials (1989), Wiley, New York
14. Hill R., and Hutchinson J.W. Bifurcation phenomena in the plane tension test. Journal of the Mechanics and Physics of Solids 23 (1975) 239-264
15. Kanninen M.F., and Popelar C.H. Advanced Fracture Mechanics (1985), Oxford University Press, New York
16. Kitagawa, H., Komeda, S., 1986. Finite element analysis of crack-tip opening. In: Computational Mechanics'86: Theory and Applications, vol. V. Tokyo, pp. 157-162.
17. Kuroda M., and Tvergaard V. Effect of strain path change on limits of ductility of anisotropic metal sheets. International Journal of Mechanical Sciences 42 (2000) 867-887
18. Lam P.S., and McMeeking R.M. Analyses of steady quasi-static crack growth in plane strain tension in elastic-plastic materials with non-isotropic hardening. Journal of the Mechanics and Physics of Solids 32 (1984) 395-414
19. Levkovitch V., Sievert R., and Svendsen B. Simulation of fatigue crack propagation in ductile metals by blunting and re-sharpening. International Journal of Fracture 136 (2005) 207-220
20. Liu N., and Drugan W.J. Finite deformation finite element analyses of tensile growing crack fields in elastic-plastic material. International Journal of Fracture 61 (1993) 189-210
21. Louat N., Sadananda K., Duesbery M., and Vasudevan A.K. A theoretical evaluation of crack closure. Metallurgical Transactions A24 (1993) 2225-2232
22. Lynn A.K., and DuQuesnay D.L. Computer simulation of variable amplitude fatigue crack initiation behaviour using a new strain-based cumulative damage model. International Journal of Fatigue 24 (2002) 977-986
23. Mathur K.K., Needleman A., and Tvergaard V. Ductile fracture analyses on massively parallel computers. Computer Methods in Applied Mechanics and Engineering 119 (1993) 283-309
24. McClintock F.A. Plasticity aspects of fracture. In: Liebowitz H. (Ed). Fracture: An Advanced Treatise vol. 3 (1971), Academic Press, New York 47-225
25. McClung R.C. Crack closure and plastic zone sizes in fatigue. Fatigue and Fracture of Engineering Materials and Structures 14 (1991) 455-468
26. McClung R.C., and Davidson D.L. High-resolution numerical and experimental studies of fatigue cracks. Engineering Fracture Mechanics 39 (1991) 113-130
27. McClung R.C., and Sehitoglu H. On the finite element analysis of fatigue crack closure. - 1. Basic modeling issues. - 2. Numerical results. Engineering Fracture Mechanics 33 (1989) 237-272
28. McClung R.C., Thacker B.H., and Roy S. Finite element visualisation of fatigue crack closure in plane stress and plane strain. International Journal of Fracture 50 (1991) 27-49
29. McMeeking R.M. Finite deformation analysis of crack tip opening in elastic-plastic materials and implications for fracture. Journal of the Mechanics and Physics of Solids 25 (1977) 357-381
30. McMeeking, R.M., Parks, D.M., 1979. On criteria of J-dominance of crack-tip fields in large-scale yielding. In: Elastic-Plastic Fracture. ASTM STP 668, American Society for Testing and Materials, pp. 175-194.
31. Miller R., Ortiz M., Phillips R., Shenoy V., and Tadmor E.B. Quasi-continuum models of fracture and plasticity. Engineering Fracture Mechanics 61 (1998) 427-444
32. Moran B., Asaro R.J., and Shih C.F. Effects of material rate sensitivity and void nucleation on fracture initiation in circumferentially cracked bar. Metallurgical Transactions A22 (1990) 161-170
33. Needleman A. On the finite element formulations for large elastic-plastic deformations. Computers and Structures 20 (1985) 247-257
34. Needleman, A., Tvergaard, V., 1983. Crack-tip stress and deformation fields in a solid with vertex on its yield surface. In: Elastic-Plastic Fracture: Second Symposium, vol. 1 - Inelastic Crack Analysis, ASTM STP 803, American Society for Testing and Materials, pp. 80-115.
35. Nguyen O., Repetto E.A., Ortiz M., and Radovitzky R.A. A cohesive model of fatigue crack growth. International Journal of Fracture 110 (2001) 351-369
36. Noroozi A.H., Glinka G., and Lambert S. Prediction of fatigue crack growth under constant amplitude loading and a single overload based on elasto-plastic crack tip stresses and strains. Engineering Fracture Mechanics 75 (2008) 188-206
37. Pippan R., and Riemelmoser F.O. Visualization of the plasticity-induced crack closure under plane strain conditions. Engineering Fracture Mechanics 60 (1998) 315-322
38. Rice, J.R., 1967. Mechanics of crack tip deformation and extension by fatigue. In: Fatigue Crack Propagation, ASTM STP 415, American Society for Testing and Materials, pp. 247-309.
39. Rice, J.R., 1968. Mathematical methods in the mechanics of fracture. In: Liebowitz, H. (Ed.), Fracture: An Advanced Treatise, vol. 2. Academic Press, New York (Russian edition, Moscow, Mir, 1973, pp. 204-335).
40. Rice J.R., and Johnson M.A. The role of large crack tip geometry changes in plane strain fracture. Inelastic Behavior of Solids (1977), McGraw-Hill, New York 641-672
41. Rice J.R., and Tracey D.M. Computational fracture mechanics. Numerical and Computer Methods in Structural Mechanics (1973), Academic Press, New York 585-623
42. Ritchie R.O. Mechanisms of fatigue-crack propagation in ductile and brittle solids. International Journal of Fracture 100 (1999) 55-83
43. Romeo A., and Ballarini R. K-Dominance for a pressurized Griffith crack. International Journal of Fracture 71 (1995) 95-97
44. Roychowdhury S., and Dodds R.H. A numerical investigation of 3-D small-scale yielding fatigue crack growth. Engineering Fracture Mechanics 70 (2003) 2363-2383
45. Sadananda K., and Vasudevan A.K. Fatigue crack growth mechanisms in steels. International Journal of Fatigue 25 (2003) 899-914
46. Sadananda K., Vasudevan A.K., Holtz R.L., and Lee E.U. Analysis of overload effects and retardation phenomena. International Journal of Fatigue 21 (1999) S233-S246
47. Savruk, M.P., 1988. Stress Intensity Factors in Solids with Cracks, Naukova Dumka, Kiev (in Russian).
48. Sidoroff F., and Dogui A. Some issues about anisotropic elastic-plastic models at finite strain. International Journal of Solids and Structures 38 (2001) 9569-9578
49. Stumpf H., and Saczuk J. On a general concept for the analysis of crack growth and material damage. International Journal of Plasticity 17 (2001) 991-1028
50. Suresh S. Fatigue of Materials (1991), Cambridge University Press, Cambridge
51. Svendesen B. On the modelling of anisotropic elastic and inelastic material behaviour at large deformation. International Journal of Solids and Structures 38 (2001) 9579-9599
52. Taylor D. The theory of critical distances. Engineering Fracture Mechanics 75 (2008) 1696-1705
53. Toribio, J., Kharin, V., 1998. High-resolution numerical modelling of stress-strain fields in the vicinity of a crack tip subjected to fatigue. In: Fracture from Defects (ECF12), vol. 2. EMAS, pp. 1059-1064.
54. Toribio, J., Kharin, V., 1999a. Finite deformation analysis of cyclic elastoplastic crack-tip fields and implications for fatigue fracture. In: Fatigue'99, vol. 2, EMAS, pp. 705-710.
55. Toribio, J., Kharin, V., 1999b. Role of fatigue crack closure stresses in hydrogen-assisted cracking. In: Advances in Fatigue Crack Closure Measurement and Analysis, vol. 2, ASTM STP 1343, ASTM, West Gonshohocken, pp. 440-458.
56. Toribio, J., Kharin, V., 2000. Numerical modelling of cyclic stress-strain fields near a crack tip: the role of strain hardening. In: Fracture Mechanics: Applications and Challenges (ECF13), Elsevier, Amsterdam, 8 pp (on CD).
57. Toribio J., and Kharin V. Localized plasticity near a crack tip in a strain hardening material subjected to mode I loading. Materials Science and Engineering A319-321 (2001) 535-539
58. Toribio J., and Kharin V. Comments on simulations of fatigue crack propagation by blunting and re-sharpening: the mesh sensitivity. International Journal of Fracture 140 (2006) 285-292
59. Toribio J., and Kharin V. Large crack-tip deformations and plastic crack advance during fatigue. Materials Letters 61 (2007) 964-967
60. Toribio J., Ovejero O., and Kharin V. Mixed-mode hydrogen assisted cracking in high-strength steel: The role of cyclic load history. Metallurgical Transactions A30 (1999) 1882-1885
61. Tvergaard V. On fatigue crack growth in ductile materials by crack-tip blunting. Journal of the Mechanics and Physics of Solids 52 (2004) 2149-2166
62. Tvergaard V. Overload effects in fatigue crack growth by crack-tip blunting. International Journal of Fatigue 27 (2005) 1389-1397
63. Tvergaard V. Effect of underloads or overloads in fatigue crack growth by crack-tip blunting. Engineering Fracture Mechanics 73 (2006) 869-879
64. Tvergaard V., Needleman A., and Lo K.K. Flow localization in the plane strain tensile test. Journal of the Mechanics and Physics of Solids 29 (1981) 115-142
65. Vasudevan A.K., Sadananda K., and Glinka G. Critical parameters for fatigue damage. International Journal of Fatigue 23 Suppl. 1 (2001) 39-53
66. Wallin M., Ristinmaa M., and Ottosen N.S. Kinematic large strain plasticity. European Journal of Mechanics A - Solids 22 (2003) 341-356
67. Wu J., and Ellyin F. A study of fatigue crack closure by elastic-plastic finite element analysis for constant amplitude loading. International Journal of Fracture 82 (1996) 43-65
68. Xu Y., Gregson P.J., and Sinclair I. Systematic assessment of compliance-based crack closure measurements in fatigue. Materials Science and Engineering A284 (2000) 114-125