Bond strength of denture teeth to acrylic resin: Effect of thermocycling and polymerisation methods

Gerodontology

Volumn 25, Issue 4, 2008, Pages 237-244

  Barbosa, Debora Barros ^a   Barão, Valentim Adelino Ricardo ^a   Monteiro, Douglas Roberto ^a   Compagnoni, Marco Antonio ^a   Marra, Juliê ^a  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

Author keywords

Acrylic resins; Artificial; Bonding; Denture bases; Shear strength; Thermocycling; Tooth

Indexed keywords

ACRYLIC ACID RESIN; BIOMEDICAL AND DENTAL MATERIALS; CROSS LINKING REAGENT; ETHYLENE GLYCOL DIMETHACRYLATE; JET, DENTAL RESIN; METHACRYLIC ACID DERIVATIVE; METHACRYLIC ACID METHYL ESTER; POLY(METHYL METHACRYLATE); POLYMER; UNCLASSIFIED DRUG; WATER;

ADHESION; ARTICLE; CHEMISTRY; DENTAL BONDING; DENTURE; HEAT; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; MICROWAVE RADIATION; RADIATION EXPOSURE; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; SURFACE PROPERTY; TEMPERATURE; TOOTH PROSTHESIS;

ACRYLIC RESINS; ADHESIVENESS; CROSS-LINKING REAGENTS; DENTAL BONDING; DENTAL MATERIALS; DENTURE BASES; HOT TEMPERATURE; HUMANS; MATERIALS TESTING; METHACRYLATES; METHYLMETHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; MICROWAVES; POLYMERS; POLYMETHYL METHACRYLATE; SHEAR STRENGTH; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TOOTH, ARTIFICIAL; WATER;

EID: 61449428141     PISSN: 07340664     EISSN: 17412358     Source Type: Journal    
DOI: 10.1111/j.1741-2358.2008.00218.x     Document Type: Article

References (45)

1. Patil SB, Naveen BH, Patil NP. Bonding acrylic teeth to acrylic resin denture bases: a review. Gerodontology 2006 23 : 131 139.
2. Eichner K. Recent knowledge gained from long-term observations in the field of prosthodontics. Int Dent J 1984 34 : 35 40.
3. Cunningham JL. Shear bond strength of resin teeth to heat-cured and light-cured denture base resin. J Oral Rehabil 2000 27 : 312 316.
4. Darbar UR, Huggett R, Harrison A et al. The effect of impurities on the stress distribution at the tooth/denture base resin interface. Asian J Aesthet Dent 1994 2 : 7 10.
5. Cunningham JL. Bond strength of denture teeth to acrylic base. J Dent 1993 21 : 274 280.
6. Darbar UR, Huggett R, Harrison A. Denture fracture - a survey. Br Dent J 1994 176 : 342 345.
7. Huggett R, John G, Jagger RG et al. Strength of the acrylic denture base tooth bond. Br Dent J 1982 153 : 187 190.
8. Rupp NW, Bowen RL, Paffenberger GC. Bonding cold curing denture base acrylic resin to acrylic resin teeth. J Am Dent Assoc 1971 83 : 601 606.
9. Cunningham JL, Benington IC. An investigation of the variables which may affect the bond between plastic teeth and denture base resin. J Dent 1999 27 : 129 135.
10. Crabtree MG, Atkinson HF. A preliminary report on the solubility of decalcified dentine in water. Aust J Dent 1995 55 : 340 342.
11. Palmer DS, Barco MT, Billy EJ. Temperature extremes produced orally by hot and cold liquids. J Prosthet Dent 1992 67 : 325 327.
12. Boehm RF. Thermoenvironment of teeth during open mouth respiration. J Dent Res 1972 51 : 75 78.
13. Gale MS, Darvell BW. Thermocycling procedures for laboratory testing of dental restorations. J Dent 1999 27 : 89 99.
14. Wendt SL, Mclnnes PM, Dickinson GL. The effect of thermocycling in microleakage analysis. Dent Mater 1992 8 : 181 184.
15. Chai J, Takahashi Y, Takahashi T et al. Bonding durability of conventional resinous denture teeth and highly crosslinked denture teeth to a pour-type denture base resin. Int J Prosthodont 2000 13 : 112 116.
16. Amin WM. Durability of acrylic tooth bond to polymeric denture base resins. Eur J Prosthodont Restor Dent 2002 10 : 57 61.
17. Schneider RL. Microwave processing of acrylic resin. Trends Tech Contemp Dent Lab 1995 12 : 29 33.
18. De Clerck JP. Microwave polymerisation of acrylic resins used in dental prosthetics. J Prosthet Dent 1987 57 : 650 658.
19. Schneider RL, Curtis ER, Clancy JMS. Tensile bond strength of acrylic resin denture teeth to a microwave- or heat-processed denture base. J Prosthet Dent 2002 88 : 145 150.
20. Al Doori D, Huggett R, Bates JF et al. A comparison of denture base acrylic resins polymerised by microwave irradiation and by conventional water bath curing systems. Dent Mater 1988 4 : 25 32.
21. Polyzois GL, Zissis AJ. Comparison of the toughness of denture bases cured by microwaves or dry heat. Compend Contin Educ Dent 1995 16 : 228, 230 232.
22. Gettleman L, Nathanson D, Myerson RL. Effect of rapid curing procedures on polymer implant materials. J Prosthet Dent 1977 37 : 74 82.
23. Keller JC, Lautenschlager EP. Porosity reduction and its associated effect on the diametral tensile strength of activated acrylic resins. J Prosthet Dent 1985 53 : 374 379.
24. Polyzois GL, Dahal JE. Bonding of synthetic resin teeth to microwave or heat activated denture base resin. Eur J Prosthodont Restor Dent 1993 2 : 41 44.
25. Takahashi Y, Chai J, Takahashi T et al. Bond strength of denture teeth to denture base resins. Int J Prosthodont 2000 13 : 59 65.
26. Geerts G, Jooste CH. A comparison of the bond strengths of microwave- and water bath-cured denture material. J Prosthet Dent 1993 70 : 406 409.
27. Barpal D, Curtis DA, Finzen F et al. Failure load of acrylic resin denture teeth bonded to high impact acrylic resins. J Prosthet Dent 1998 80 : 666 671.
28. El-Sheikh MM, Powers JM. Tensile bond strength of porcelain teeth to denture resin before and after aging. Int J Prosthodont 1998 11 : 16 20.
29. Cunningham JL, Benington IC. Bond strength variation of synthetic resin teeth in dentures. Int J Prosthodont 1995 8 : 69 72.
30. Cunningham JL, Benington IC. A new technique for determining the denture tooth bond. J Oral Rehabil 1996 23 : 202 209.
31. Clancy JMS, Boyer DB. Comparative bond strengths of light-cured, heat-cured, and autopolymerizing denture resins to denture teeth. J Prosthet Dent 1989 61 : 457 462.
32. Clancy JMS, Hawkins LF, Keller JC et al. Bond strength and failure analysis of light-cured denture resins bonded to denture teeth. J Prosthet Dent 1991 65 : 315 324.
33. Chung RWC, Clark RKF, Darvell BW. The bonding of cold-cured acrylic resin to acrylic denture teeth. Aust Dent J 1995 40 : 241 245.
34. Büyükyilmaz S, Ruyter IE. Curing temperature effects acrylic denture base-tooth bond. Int J Prosthodont 1997 10 : 49 54.
35. Orchard NA, Howlett JA, Davies EH et al. Adhesive composite resins for artificial teeth: a laboratory investigation of bond strength to a cobalt-chromium alloy. Biomaterials 1997 18 : 935 938.
36. Papazoglou E, Vasilas AI. Shear bond strengths for composite and autopolymerized acrylic resins bonded to acrylic resin denture teeth. J Prosthet Dent 1999 82 : 573 578.
37. Lagouvardos PE, Polyzois GL. Shear bond strength between composite resin and denture teeth: effect of tooth type and surface treatments. Int J Prosthodont 2003 16 : 499 504.
38. Spratley MH. An investigation of the adhesion of acrylic resin to dentures. J Prosthet Dent 1987 58 : 389 392.
39. Vallittu PK. Bonding of resin teeth to the polymethyl methacrylate denture base material. Acta Odontol Scand 1995 53 : 99 104.
40. Kawara M, Carter JM, Ogle RE et al. Bonding of plastic teeth to denture base resins. J Prosthet Dent 1991 66 : 566 571.
41. Compagnoni MA, Barbosa DB, Souza RF et al. The effect of polymerisation cycle on porosity in microwave-processed denture base resin. J Prosthet Dent 2004 91 : 281 285.
42. Vallittu PK, Ruyter IE, Nat R. The swelling phenomenon of acrylic resin polymer teeth at the interface with denture base polymers. J Prosthet Dent 1997 78 : 194 199.
43. International Organization for Standardization. Dentistry: Polymer-based Crown and Bridge Materials. ISO 10477: 1992 DAM 1 Draft Amendment. ISO/IC 106/SC 2. Geneva : International Organization for Standardization, 1995.
44. Saavedra G, Valandro LF, Leite FP et al. Bond strength of acrylic teeth to denture base resin after various surface conditioning methods before and after thermocycling. Int J Prosthodont 2007 20 : 199 201.
45. Lai CP, Tsai MH, Chen M et al. Morphology and properties of denture acrylic resins cured by microwave energy and conventional water bath. Dent Mater 2004 20 : 133 141.