Effects of the filler type and quantity on the flashover voltage and hydrophobicity of RTV silicone rubber coatings

Iranian Polymer Journal (English Edition)

Volumn 18, Issue 2, 2009, Pages 149-157

  Farhang, Faezeh ^a   Ehsani, Morteza ^b   Jazayeri, Seyed Hamid ^a  

^a IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Iran)

^b IRAN POLYMER AND PETROCHEMICAL INSTITUTE   (Iran)

Author keywords

ATH; Contamination problem; Flashover phenomena; RTV coating; Silica

Indexed keywords

ANGLE MEASUREMENT; COASTAL ZONES; CONTACT ANGLE; CONTAMINATION; ELASTOMERS; ELECTRIC INSULATORS; FILLERS; FLASHOVER; LEAD; PORCELAIN; RUBBER; SILICA; SILICONE COATINGS; SILICONES;

ATH; COASTAL AREAS; CONTACT-ANGLE MEASUREMENTS; CONTAMINATION PROBLEM; DRY AND WET CONDITIONS; EROSION RESISTANCES; FLASHOVER VOLTAGES; GOLD-COATED; INDUSTRIAL POLLUTIONS; PORCELAIN INSULATORS; POWER SYSTEMS; ROOM TEMPERATURE VULCANIZING; RTV COATING; RTV SILICONE RUBBERS; SEM OBSERVATIONS; SILICA FILLERS; SILICONE RUBBERS; SURFACE CHARACTERISTICS; SURFACE FLASHOVERS; SUSPENSION INSULATORS; TEST RESULTS;

RUBBER COATINGS;

EID: 61449101492     PISSN: 10261265     EISSN: 10261265     Source Type: Journal    
DOI: None     Document Type: Article

References (19)

1. Ehsani M, Zeynali M, Abtahi M, Harati A, LDPE/EPDM blends as electrical insulators with unique surface, electrical and mechanical properties, Iran Polym J, 18, 37-47, 2009.
2. Ehsani M, Bakhshandeh GR, Morshedian J, Borsi H, Gockenbach E, The dielectric behavior of out-door high voltage polymeric insulation due to environmental aging, J Eur Trans Elect Power, 1, 47-59, 2007.
3. Cherney EA, Hackam H, Kim SH, Porcelain insulator maintenance with RTV silicone rubber coatings, IEEE Trans Power Deliv, 3, 1177-1181, 1991.
4. Gorur RS, Chernry EA, Burnham JT, Outdoor Insulators, 1st ed, Gorur Ine, Phoenix, Arizona, USA, 16-245, 1999.
5. Deng H, Hackam R, Cherney EA, Influence of thickness, substrate type, amount of silicone fluid and solvent type on the electrical performance of RTV silicone rubber coatings, IEEE Trans Power Deliv, 1,431-443, 1996.
6. Ehsani M, Borsi H, Gockenbach E, Morshedian J, Bakhshandeh GR, An investigation of dynamic mechanical, thermal, and electrical properties of housing materials for outdoor polymeric Insulators, Eur Polym J, 11, 2495-2503, 2004.
7. Ehsani M, Borsi H, Gockenbach E, Bakhshandeh GR, Morshedian J, Modified silicone rubber for use as high voltage outdoor insulators, J Adv Polym Technol, 1, 51-61, 2005.
8. Grour RS, Cherney E.A, Tourreil C, Dumora D, Harmon R, Hervig H, Kingsbury B, Kise J, Orbeck T, Tanaka K, Tay R, Toskey G, Wiitanen D, Protective coatings for improving contamination performance of outdoor high voltage ceramic insulators, IEEE Trans Power Deliv, 2, 924-933, 1995.
9. Gorur RS, Karady G, Jagota A, Shah M, Furumasu BC, Comparison of RTV silicone rubber coatings under artificial contamination in a fog chamber, IEEE Trans Power Deliv, 2, 713-719, 1992.
10. Chernry EA, RTV silicone- A high tech solution for a dirty insulator problem, IEEE Elect Insul Magazin, 6, 8-14, 1995.
11. Devendranath D, Channakeshava, Rajkumar AD, Leakage current and charge in RTV coated insulators under pollution conditions, IEEE Trans Dielect Elect Insul, 2, 294-299, 2002.
12. Kim S, Cherney EA, Hydrophobic behaviour of insulators coated with RTV silicone rubber, IEEE Elect Insul Magazin, 3, 610-622, 1992.
13. Kim S, Cherney EA, Hydrophobic behaviour of insulators coated with RTV silicone rubber, 3rd Ml Conf on Properties and Applications of Dielectric Materials, Tokyo, Japan, 972-976, 8th-12th July 1991.
14. Zhu Y, Otsubo M, Honda C, Ohno A, Suppression effect of ATH filler on the erosion of filled silicone rubber exposed to dry band arc discharge, Polym Test J, 24, 893-899, 2005.
15. Meyer L, Omranipour R, Jayaram S, Cherney EA, The effect of ATH and silica on tracking and erosion resistance of silicone rubber compounds for outdoor insulation, IEEE Int Symp, USA, 271-274, 2002.
16. Ehsani M, Multi-component polymeric alloys as outdoor high voltage insulator, PhD thesis, Department of Polymer Processing, Iran Polymer and Petrochemical Institute, Apr 2003.
17. Homma H, Kuroyagi T, Izumi K, Mirley CL, Evaluation on surface degradation of silicone rubber using thermogravimetric analysis, Int Symp Elect Insul Mater, Japan, 631-634, 27th-30th Sep 1998.
18. Deng H, Hackam R, Low-molecular weight silicone fluid in RTV silicone rubber coatings, IEEE Trans Dielect Elect Insul, 1, 84-94, 2005.
19. Katz HS, Milewski JV, Handbook of Fillers for Plastics, Van Nostrand Reinhold, New York, 166-169, 1987.