Ferroelectric characterization of single PZT fibers

Journal of Intelligent Material Systems and Structures

Volumn 20, Issue 4, 2009, Pages 379-385

  Heiber, Juliane ^a   Belloli, Alberto ^a,b   Ermanni, Paolo ^b   Clemens, Frank ^a  

^a SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^b ETH ZURICH   (Switzerland)

Author keywords

Butterfly loops; Ferroelectric characterization; Hysteresis loops; Microstructure; Phase composition; PZT; Single piezoelectric fibers

Indexed keywords

CERAMIC FIBERS; FERROELECTRICITY; GRAIN SIZE AND SHAPE; HYSTERESIS; HYSTERESIS LOOPS; MAGNETIC MATERIALS; MICROSTRUCTURE; PHASE COMPOSITION; PIEZOELECTRIC ACTUATORS; PIEZOELECTRIC CERAMICS; PIEZOELECTRIC TRANSDUCERS; PIEZOELECTRICITY; POLARIZATION; QUALITY ASSURANCE; QUALITY CONTROL; QUALITY FUNCTION DEPLOYMENT; SEMICONDUCTING LEAD COMPOUNDS; SINTERING; TOTAL QUALITY MANAGEMENT;

BLOCKING FORCES; BUTTERFLY LOOPS; CERAMETRICS; COERCIVE FIELDS; CONTROL PURPOSE; FERROELECTRIC CHARACTERIZATION; FERROELECTRIC PROPERTIES; GRAIN SIZES; HIGH-PERFORMANCE FIBERS; LARGE GRAINS; LOW POROSITIES; MANUFACTURING PROCESS; MORPHOTROPIC PHASE BOUNDARIES; POLARIZATION LOOPS; PZT; PZT FIBERS; REMNANT POLARIZATIONS; RHOMBOHEDRAL PHASE; SINGLE FIBERS; SINGLE PIEZOELECTRIC FIBERS; SINTERING ATMOSPHERES; SMART MATERIALS; SURFACE LAYERS; TESTING PROCEDURES;

FIBERS;

EID: 60849128239     PISSN: 1045389X     EISSN: 15308138     Source Type: Journal    
DOI: 10.1177/1045389X08094365     Document Type: Article

References (30)

1. Belloli, A., Heiber, J., Clemens, F., and Ermanni, P. 2008. " Novel Characterization Procedure for Single Piezoelectric Fibers, " Journal of Intelligent Material Systems and Structures, submitted.
2. Bent, A.A. 1997. Active Fiber Composite for Structural Actuation, PhD Thesis, MIT-Department of Aeronautics and Astronautics, Cambridge, MA.
3. Bystricky, P. 2000. " Ceramic Piezoelectric Fibers: Correlating Single Fiber Properties with Active Fiber Composite Performance, " In: Wereley N.M. (ed.), SPIE Smart Structures and Materials - Smart Structures and Integrated Systems, SPIE Conference Proceedings, SPIE, Vol. no. 3985 pp. 552-559, Newport Beach CA.
4. Cass, R.B. 1991. "Fabrication of Continuous Ceramic Fiber by the Viscous Suspension Spinning Process, " American Ceramic Society Bulletin, 70 (3). 424-429.
5. Cheng, S., Lloyd, I.K., and Kahn, M. 1992. "Modification of Surface Texture by Grinding and Polishing Lead Zirconate Titanate Ceramics, " Journal of the American Ceramic Society, 75 (8). 2293-2296.
6. Chinn, R.E. 2002. Preparation and Analysis of Ceramic Microstructures, ASM International, Materials Park.
7. Dent, A.C., Nelson, L.J., Bowen, C.R., Stevens, R., Cain, M., and Stewart, M. 2005. "Characterisation and Properties of Fine Scale PZT Fibres, " Journal of the European Ceramic Society, 25 (12). 2387-2391.
8. Fernandes, J.C., Hall, D.A., Cockburn, M.R., and Greaves, G.N. 1995. "Phase Coexistence in PZT Ceramic Powders," Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 97 (1-4). 137-141.
9. French, J.D. and Cass, R.B. 1998. "Developing Innovative Ceramic Fibers, " American Ceramic Society Bulletin, 77 (5). 61-65.
10. French, J.D., Weitz, G.E., Luke, J.E., Cass, R.B., Jadidian, B., Bhargava, P., and Safari, A. 1997. " Production of Continuous Piezoelectric Ceramic Fibers for Smart Materials and Active Control Devices, " In: Sater J. M. (ed.), SPIE Smart Structures and Materials - Industrial and Commercial Applications of Smart Structures Technologies, SPIE Conference Proceedings, SPIE, Vol. no. 3044, pp. 406-412.
11. Gesang, T., Knaebel, H., Maurieschat, U., Hartwig, A., Riesenbeck, T., Schaefer, H., Battermann, A., Perl, J., Gau, A., Schoenecker, A., and Seffner, L. 2002. " Comparison of Adaptronic Microsystems Based on Piezoelectric Fibers for General Use or for the Utilization in Prepreg FRP, " In: McGorwan A.-M.R. (ed.), SPIE Smart Structures and Materials: Industrial and Commercial Applications of Smart Structures Technologies, SPIE Conference Proceedings, SPIE, Vol. no. 4698, pp. 325-332, San Diego.
12. Gesemann, H.-J. and Gesemann, R. 1978. "Analysenverfahren zur Ermittlung des PbO-gehaltes in PZT-keramiken, " Hermsdorfer Technische Mitteilungen, 18 (50). 1600-1601.
13. Haertling, G.H. 1964. "Hot-pressed Lead Zirconate-titanate Ceramics Containing Bismuth, " The American Ceramic Society Bulletin, 43 (12). 875-879.
14. Haertling, G.H. and Zimmer, W.J. 1966. "An Analysis of Hot-pressing Parameters for Lead Zirconate - Lead Titanate Ceramics Containing Two Atom Percent Bismuth, " American Ceramic Society Bulletin, 45 (12). 1084-1089.
15. Hammer, M. and Hoffmann, M.J. 1998. "Sintering Model for Mixed-oxide-derived Lead Zirconate Titanate Ceramics, " Journal of the American Ceramic Society, 81 (12). 3277-3284.
16. Heiber, J., Clemens, F., Graule, T., and Hulsenberg, D. 2005. "Thermoplastic Extrusion to Highly-loaded Thin Green Fibers Containing Pb(Zr, Ti)O3," Advanced Engineering Materials, 7 (5). 404-408.
17. Heiber, J., Clemens, F., Helbig, U., de Meuron, A., Soltmann, C., Graule, T., and Hlsenberg, D. 2007. " Properties of Pb(Zr, Ti)O3 Fibres with a Radial Gradient Structure, " Acta Materialia, 55 (19). 6499-6506.
18. Jaffe, B., Roth, R., and Marzullo, S. 1955. " Properties of Piezoelectric Ceramics in the Solid Solution Series Lead Titanate - Lead Zirconate - Lead Oxide: Tin Oxide and Lead Titanate - Lead Hafnate, " Journal of Research of the National Bureau of Standards, 55 (5). 239-254.
19. Kim, J.-W. and Heinrich, J.G. 2005. "Influence of Processing Parameters on Microstructure and Ferroelectric Properties of PZT-coated SiC Fibers, " Journal of the European Ceramic Society, 25 (9). 1637-1645.
20. Kobayashi, Y., Um, T.Y., Qiu, J., Tani, J., and Takahashi, H. 2001. " Fabrication of Piezoelectric Ceramic Fibers by Extrusion of PZT powder and PZT sol mixture, " In: Lynch, C.S. (ed.), SPIE Smart Structures and Materials - Active Materials: Behavior and Mechanics, SPIE Conference Proceedings, SPIE, Vol. no. 4333 pp. 314-321, Newport Beach.
21. Krischner, H. 1990. Einf1/4hrung in die R¶ntgenfeinstrukturanalyse, Vieweg, Braunschweig.
22. Loebmann, P., Lange, U., Glaubitt, W., Hutter, F., and Sporn, D. 2002. " Powders, Fibers, Thin Films and Aerogels: Sol-gel-derived Piezoelectric Materials, " Key Engineering Materials, 224-226: 613-618.
23. Meister, F., Vorbach, D., Niemz, F., and Schulze, T. 2003. "Functional High-tech-cellulose Materials by the ALCERU« process, " Materialwissenschaft und Werkstofftechnik, 34 (3). 262-266.
24. Nelson, L.J., Bowen, C.R., Stevens, R., Cain, M., and Stewart, M. 2003. " High Field Behavior of Piezoelectric Fibre Composites, " In: Lagoudas D.C. (ed.), SPIE Smart Structures and Materials - Active Materials: Behavior and Mechanics, SPIE Conference Proceedings, SPIE, Vol. no. 5053 pp. 544-555, San Diego, CA.
25. Selvaraj, U., Prasadarao, A.V., Komarneni, S., Brooks, K., and Kurtzet, S. 1992. "Sol-gel Processing of PbTiO3 and Pb(Zr0.52Ti0.48)O3," Journal of Materials Research, 7 (4). 992-996.
26. Strock, H.B., Pascucci, M.R., Parish, M.V., Bent, A.A., and Shrout, T.R. 1999. " Active PZT Fibers, a Commercial Production Process, " In: Wuttig, M.R. (ed.), SPIE Smart Structures and Materials - Smart Materials Technologies, SPIE Conference Proceedings, SPIE, Vol. no. 3675, pp. 22-31, Newport Beach, CA.
27. Vorbach, D., Niemz, F., Helke, G., Seffner, L., and Schonecker, A. 2001. " Mit dem Lyocell-Verfahren Hergestellte Piezokeramische Fasern -Eigenschaften und Einsatzm¶glichkeiten, " In: Adaptronic Kongress, Berlin.
28. Wang, Y., Serrano, S., and Santiago-Aviles, J.J. 2001. " Electrostatic Synthesis and Characterization of Pb(ZrxTi1-x)O3 Micro/nano-Fibers, " In: Materials Research Society Symposium Proceedings, Vol. no. 702 pp. 359-364.
29. Wegmann, M., Heiber, J., Clemens, F., Graule, T., Hlsenberg, D., and Schuster, K. 2005. "Forming Noncircular Cross-section SiO2 Glass Fibers, " Glass Science and Technology, 78 (2). 69-75.
30. Yoshikawa, S., Selvaraj, U., Moses, P., Witham, J., Meyer, R., and Shrout, T. 1995. "Pb(Zr, Ti)O3 [PZT] Fibers - Fabrication and Measurement Methods, " Journal of Intelligent Material Systems and Structures, 6 (2). 152-158.