The effect of different powder particle size on mechanical properties of sintered alumina, resin- And glass-infused alumina

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 88, Issue 2, 2009, Pages 502-508

  Chaiyabutr, Yada ^a   Giordano, Russell ^a   Pober, Richard ^a  

^a BOSTON UNIVERSITY   (United States)

Author keywords

Ceramic; Dental craniofacial material; Stress

Indexed keywords

BIOLOGICAL MATERIALS; CERAMIC MATERIALS; DISKS (MACHINE COMPONENTS); DISKS (STRUCTURAL COMPONENTS); FRACTURE; FRACTURE TOUGHNESS; GLASS; MECHANICAL PROPERTIES; PARTICLE SIZE; POWDERS; RESINS; SINTERING;

ALUMINA MATRIXES; ALUMINA POWDERS; BI-AXIAL FLEXURAL STRENGTHS; BIAXIAL STRENGTHS; CERAMIC; CERAMIC BLOCKS; CROSSHEAD SPEED; DENTAL/CRANIOFACIAL MATERIAL; INSTRON; MATRIXES; PARTICLE SIZE AND SHAPES; POWDER PARTICLES; RESIN INFUSIONS; SINTERING BEHAVIORS; UNIVERSAL TESTING MACHINES;

SINTERED ALUMINA;

ALUMINUM OXIDE; DIURETHANE DIMETHYLACRYLATE; GLASS; METHACRYLIC ACID DERIVATIVE; RESIN; TRIETHYLENE GLYCOL DIMETHACRYLATE; UNCLASSIFIED DRUG; URETHAN DERIVATIVE;

ARTICLE; BIOMECHANICS; PARTICLE SIZE; POWDER; TEMPERATURE DEPENDENCE; TENSILE STRENGTH; TOOTH PROSTHESIS;

EID: 60849127587     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31261     Document Type: Article

References (22)

1. Lange F. Sinterability of agglomerated powders. J Am Ceram Soc 1984;67:83-89.
2. Zheng J, Reed J. Effects of particle packing characteristics on solid-state sintering. J Am Ceram Soc 1989;72:810-811.
3. Lim L, Wong P, Ma J. Colloidal processing of sub-micron alumina powder compacts. J Mater Tech 1997;67:137-142.
4. Yeh T, Sacks M. Low temperature sintering of aluminum oxide. J Am Ceram Soc 1988;71:841-844.
5. Dorey R, Yeomans J, Smith P, Pan J. In situ optical dilatome-ter measurements of the initial stages of sintering of alumina. Acta mater 2001;40:519-527.
6. Das N, Maiti H. Effects of size distribution of the starting powder on the pore size and its distribution of tape cast alumina microporous membrane. J Eur Ceram Soc 1999;19:341-345.
7. Kim D, Lee M. Mechanical properties of tape cast alumina- glass dental composites. J Am Ceram Soc 1999;82:3167-3172.
8. Liu D, Lin J. Influence of ceramic powders of different characteristics on particle packing structure and sintering behavior. J Mater Sci 1999;34:1959-1972.
9. Hondrum S. A review of the strength properties of dental ceramics. J Prosthet Dent 1992;6:859-865.
10. Clark D. Interpenetrating phase composites. J Am Ceram Soc 1992;75:739-759.
11. Seghi R, Denry I, Rosenstiel S. Relative fracture toughness and hardness of new dental ceramics. J Prosthet Dent 1995; 74:145-150.
12. Bansal R, Duck W. Fracture Surface Energy Measurement by the Notch Beam Technique, Vol. 38. Philadelphia: ASTM; 1973.
13. Meyers A, Chawla K. Mechanical Behavior of Materials. Englewood Cliffs, NJ: Prentice Hall Inc.; 1999. p 354.
14. Kingery W, Bowen H, Uhlmann D. Introduction to Ceramics, 2nd ed. New York, NY: Wiley; 1976.
15. Shi J, Zhang J. Compaction and sintering behavior of bimodal alumina powder suspensions by pressure filtration. J Am Ceram Soc 2000;84:737-742.
16. Campbell S, Pelletier L, Pober R, Giordano R. Dimensional and formation analysis of a restorative ceramic and how it works. J Prosthet Dent 1995;74:332-340.
17. Giordano R, Pelletier L, Campbell S, Pober R. Flexural strength of an infused ceramic, glass ceramic and feldspathic porcelain. J Prosthet Dent 1995;73:411-418.
18. Wolf W, Francis L, Lin C, Douglas W. Melt infiltration processing and fracture toughness of alumina-glass dental composites. J Am Ceram Soc 1993;76:2691-2694.
19. Wolf W, Vaidya K, Francis L. Mechanical properties and failure analysis of alumina-glass dental composites. J Am Ceram Soc 1996;79:1769-1776.
20. Ruse N, Troczynski T, MacEntee M, Feduik D. Novel fracture toughness test using a notchless triangular prism (NTP) specimen. J Biomed Mater Res 1996;31:457-463.
21. Rosenstiel S, Porter S. Apparent fracture toughness of all ceramic crown systems. J Prosthet Dent 1989;62:529-532.
22. Wagner W, Chu T. Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics. J Pros- thet Dent 1996;76:140-144.