Effects of reactive compatibilizer on the core-shell structured modifiers toughening of poly(trimethylene terephthalate)

Polymer

Volumn 50, Issue 6, 2009, Pages 1483-1490

  Wang, Kunyan ^a   Chen, Yanmo ^a   Zhang, Yu ^a  

^a DONGHUA UNIVERSITY   (China)

Author keywords

Core shell structured modifiers; Poly(trimethylene terephthalate); Reactive compatibilizer

Indexed keywords

FOURIER TRANSFORM INFRARED SPECTROSCOPY; SCANNING ELECTRON MICROSCOPY; SHELLS (STRUCTURES);

CORE SHELL; DGEBA EPOXY RESINS; DIGLYCIDYL ETHER OF BISPHENOL-A; FOURIER TRANSFORM INFRARED; POLY (TRIMETHYLENE TEREPHTHALATE); REACTIVE COMPATIBILIZERS; RHEOLOGICAL MEASUREMENTS; TOUGHENING MECHANISMS;

EPOXY RESINS;

EPOXY RESIN; FOURIER TRANSFORM ANALYSIS; POLYBUTADIENE; POLYMER BLEND; POLYTRIMETHYLENE TEREPHTHALATE; RHEOLOGY;

EID: 60649117185     PISSN: 00323861     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymer.2009.01.046     Document Type: Article

References (40)

1. Traub H.L., Hirt P., Herlinger H., and Oppermann W. Preparation and properties of fiber-grade poly(trimethylene terephthalate). Angew Makromol Chem 230 (1995) 179-187
2. Rong-Ming M.H. Crystal structure and banded spherulite of poly(trimethylene terephthalate). Macromolecules 33 (2000) 7529-7537
3. Ravikumar H.B., Ranganathaiah C., Kumaraswamy G.N., Urs M.V.D., Jagannath J.H., Bawa A.S., et al. Positron annihilation and differential scanning calorimetric study of poly(trimethylene terephthalate)/EPDM blends. Polymer 46 (2005) 2372-2380
4. Xue M.L., Yu Y.L., Chuah H.H., Rhee J.H., Kim N.M., Lee J.H., et al. Miscibility and compatibilization of poly(trimethylene terephthalate)/acrylonitrile-butadiene-styrene blends. Eur Polym J 43 (2007) 3826-3837
5. Gonzalez I., Eguiazabal I., and Nazabal J. Structure and mechanical properties of poly(trimethylene terephthalate)/poly(hydroxyl ether of bisphenol A) blends. J Appl Polym Sci 102 (2006) 3246-3254
6. Dompas D., and Groeninckx G. Cavitation versus debonding during deformation of rubber-modified poly(vinyl chloride). Polymer 36 (1995) 437-441
7. Rosch J., and Mulhaupt R. The role of core/shell-microparticle dispersions in polypropylene/polyamide-6 blends. Polym Bull 32 (1994) 697-704
8. Kim D.S., Cho K., Kim J.K., and Park C.E. Effects of particle size and rubber content on fracture toughness in rubber-modified epoxies. Polym Eng Sci 36 (1996) 755-768
9. Zhou C., Chen M., Tan Z.Y., Sun S.L., Ao Y.H., and Zhang M.Y. The influence of arrangement of St in MBS on the properties of PVC/MBS blends. Eur Polym J 42 (2006) 1811-1818
10. Sue H.J., Garcia E.I., and Pickelman D.M. Fracture mechanisms in rigid core-shell particle modified high performance epoxies. Colloid Polym Sci 274 (1996) 342-349
11. In: Lutz Jr. J.T., and Dunkelberger D.L. (Eds). Impact modifiers for PVC. The history and practice (1992), John Wiley and Sons, Inc., New York
12. Parker D.S., Sue H.J., Huang J., and Yee A.F. Toughening mechanisms in core-shell rubber-modified polycarbonate. Polymer 31 12 (1990) 2267-2277
13. Laatsch J., Kim G.M., Michler G.H., Arndt T., and Sufke T. Investigation of the micromechanical deformation behavior of transparent toughened poly(methyl methacrylate) modified with core-shell particles. Polym Adv Technol 9 (1998) 716-720
14. Hage E., Hale W., Keskkula H., and Paul D.R. Impact modification of poly(butylene terephthalate) by ABS materials. Polymer 38 (1997) 3237-3250
15. Crawford E., and Lesser A.J. Mechanics of rubber particle cavitation in toughened polyvinylchloride. Polymer 41 (2000) 5865-5870
16. Sun Y.J., Hu G.H., Lambla M., and Kotlar H.K. In situ compatibilization of polypropylene and poly(butylene terephthalate) polymer blends by one-step reactive extrusion. Polymer 37 18 (1996) 4119-4127
17. Hu G.H., Sun Y.J., and Lambla M. Devolatilization: a critical sequential operation for in situ compatibilization of immiscible polymer blends by one-step reactive extrusion. Polym Eng Sci 36 5 (1996) 676-686
18. Wang X.D., and Li H.Q. Compatibilizing effect of diglycidyl ether of bisphenol-A in polymer blend system: nylon6 combined with poly(butyl acrylate) core and poly(methyl methacrylate) shell particles. J Appl Polym Sci 77 1 (2000) 24-29
19. Dedecker K., and Groeninckx G. Reactive compatibilization of A/(B/C) polymer blends. Part 1. Investigation of the phase morphology development and stabilization. Polymer 39 (1998) 4985-4992
20. Soh Y.S. Miscibility of poly(methyl methacrylate) with poly(hydroxyl ether) of bisphenol A. J Appl Polym Sci 45 10 (1992) 1831-1835
21. Wu G.F., Zhao J.F., Shi H.T., and Zhang H.X. The influence of core-shell structured modifiers on the toughness of poly(vinyl chloride). Eur Polym J 40 (2004) 2451-2456
22. Sudhin D., and David J.L. Polymer compatibilizers (1996), Hanser Publishers, Munich
23. Loyens W., and Groeninckx G. Phase morphology development in reactively compatibilized polyethylene terephthalate/elastomer blends. Macromol Chem Phys 203 (2002) 1702-1714
24. Yu Z.Z., Yan C., Dasari A., Dai S.C., Mai Y.W., and Yang M.S. On toughness and stiffness of poly(butylene terephthalate) with epoxide-containing elastomer by reactive extrusion. Macromol Mater Eng 289 8 (2004) 763-770
25. Loyens W., and Groeninckx G. Effect of crosslinking point distribution on properties of controllable cross-linking poly(ether ether ketones). Polymer 44 (2003) 123-124
26. Martin P., Devaux J., Legras R., van Gurp M., and van Duin M. Competitive reactions during compatibilization of blends of polybutylene terephthalate with epoxide-containing rubber. Polymer 42 6 (2000) 2463-2478
27. Meincke O., Kaempfer D., Weickmann H., Friedrich C., Vathauer M., and Waith H. Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene. Polymer 45 (2004) 739-748
28. Wu M., and Shaw L. On the improved properties of injection-molded, carbon nanotube-filled PET/PVDF blends. Power Sources 136 (2004) 37-44
29. Li Y.J., and Shmizu H. Conductive PVDF/PA6/CNTs nanocomposites fabricated by dual formation of continuous and nanodispersion structures. Macromolecules 41 (2008) 5339-5344
30. Legros A., Carreau P.J., Favis B.D., and Michel A. Reactive compatibilization of polyester/vinyl acetate copolymer blends: rheological, morphological and mechanical properties. Polymer 35 (1994) 758-764
31. Oshinski A.J., Keskkula H., and Paul D.R. Rubber toughening of polyamides with functionalized block copolymers: 1. Nylon 6. Polymer 33 2 (1992) 268-283
32. Oshinski A.J., Keskkula H., and Paul D.R. Rubber toughening of polyamides with functionalized block copolymers: 2. Nylon-6, 6. Polymer 33 2 (1992) 284-293
33. Wang K.Y., Chen Y.M., and Zhang Y. Effects of organoclay platelets on morphology and mechanical properties in PTT/EPDM-g-MA/organoclay ternary nanocomposites. Polymer 49 (2008) 3301-3309
34. Wu S. Phase structure and adhesion in polymer blends: a criterion for rubber toughening. Polymer 26 (1985) 1855-1863
35. Liu Z.H., Zhu X.G., Wu L.X., Li Y., Qi Z.N., Choy C.L., et al. Effects of interfacial adhesion on the rubber toughening of poly(vinyl chloride) Part 1. Impact tests. Polymer 42 (2001) 737-746
36. Dijkstra K., and Bolscher G.H.T. Nylon-6 rubber blends: 3. Stresses in and around rubber particles and cavities in a nylon matrix. J Mater Sci 29 (1994) 4286-4293
37. Lazzeri A., and Bucknall C.B. Applications of a dilatational yielding model to rubber-toughened polymers. Polymer 36 (1995) 2895-2902
38. Tzika P.A., Boyce M.C., and Parks D.M. Micromechanics of deformation in particle-toughened polyamides. J Mech Phys Solids 48 (2000) 1893-1929
39. Borggreve R.J., Gaymans R.J., Schuijer J., and Ingen J.F. Brittle-tough transition in nylon-rubber blends: effects of rubber concentration and particle size. Polymer 28 (2004) 1489-1496
40. van der Wal A., and Gaymans R.J. Polypropylene-rubber blends: 5. Deformation mechanism during fracture. Polymer 40 (1999) 6067-6075