Transpressive ductile flow and oblique ramping of lower crust in a two-sided orogen: Insight from quartz grain-shape fabrics near the Alpine fault, New Zealand

Tectonics

Volumn 23, Issue 2, 2004, Pages

  Little, Timothy A ^a  

^a VICTORIA UNIVERSITY OF WELLINGTON   (New Zealand)

Author keywords

Alpine fault; Continental deformation; Ramping; Southern Alps; Strain; Transpression

Indexed keywords

DEFORMATION; FAULT; OROGENY; PLATE TECTONICS; QUARTZ; STRAIN ANALYSIS;

AUSTRALASIA; NEW ZEALAND; SOUTH ISLAND; SOUTHERN ALPS;

EID: 6044231851     PISSN: 02787407     EISSN: None     Source Type: Journal    
DOI: 10.1029/2002TC001456     Document Type: Article

References (82)

1. Apotria, T. G., W. T. Sneddon, J. H. Spang, and D. V. Wiltschko (1992), Kinematic models of deformation at an oblique ramp, in Thrust Tectonics, edited by K. R. McClay, pp. 141-154, Chapman and Hall, London.
2. Axen, G. J., and J. M. Bartley (1997), Field tests of rolling hinges: Existence, mechanical types, and implications for extensional tectonics, J. Geophys. Res., 102, 20,515-20,537.
3. Beaumont, C., P. J. J. Kamp, J. Hamilton, and P. Fullsack (1996), The continental collision zone, South Island, New Zealand: Comparison of geodynamical models and observations, J. Geophys. Res., 101, 3333-3359.
4. Beavan, J., and J. Haines (2001), Contemporary horizontal velocity and strain rate fields of the Pacific-Australian plate boundary through New Zealand, J. Geophys. Res., 106, 741-770.
5. Beavan, J., et al. (1999), Crustal deformation during 1994-1998 due to oblique continental collision in the central Southern Alps, New Zealand, and implications for seismic potential of the Alpine fault, J. Geophys. Res., 104, 25,233-25,255.
6. Berger, P., and A. Johnson (1980), First-order analysis of deformation of a thrust sheet moving over a ramp, Tectonophysics, 70, T9-T24.
7. Bonini, M., D. Sokoutis, G. Mulugeta, and E. Katrivanos (2000), Modelling hangingwall accommodation above rigid thrust ramps, J. Struct. Geol., 22, 1165-1180.
8. Bons, P. D., and J. L. Urai (1992), Syndeformational grain growth: Microstructures and kinetics, J Struct. Geol., 14, 1101-1109.
9. Bourne, S. J., P. C. England, and B. Parsons (1998), The motion of crustal blocks driven by flow of the lower lithosphere and implications for slip rates of continental strike-slip faults, Nature, 391, 655-659.
10. Braun, J., and C. Beaumont (1995), Three-dimensional numerical experiments of strain partitioning at oblique plate boundaries: Implications for contrasting tectonic styles in the southern Coast Ranges, California, and central South Island, New Zealand, J. Geophys. Res., 100, 18,059-18,074.
11. Brunel, M. (1980), Quartz fabrics in shear zone mylonites: Evidence for a major imprint due to late strain increments, Tectonophysics, 64, 33-44.
12. Burg, J. P. (1986), Quartz shape fabrics variations and c-axis fabrics in a ribbon mylonite: Arguments for an oscillating foliation, J. Struct. Geol., 8, 123-131.
13. Chester, J. S., J. H. Spagng, and J. M. Logan (1991), Influence of layering and boundary conditions of fault-bend and fault-propagation folding, Geol. Soc. Am. Bull., 103, 1059-1072.
14. Colleta, B., J. Letouzey, R. Pinedo, J.-F. Ballard, and P. Bale (1991), Computerized X-ray tomography analysis of sandbox models: Examples of thin-skinned thrust systems, Geology, 19, 1063-1067.
15. Cooper, A. F., and R. J. Norris (1994), Anatomy, structural evolution, and slip-rate of a plate-boundary thrust: The Alpine Fault at Gaunt Creek, Westland, New Zealand, Geol. Soc. Am. Bull., 106, 627-633.
16. Cox, S. C., and R. H. Findlay (1995), The Main Divide Fault Zone and its role in the formation of the Southern Alps, N. Z. J. Geol. Geophys., 38, 489-499.
17. Craw, D. (1997), Fluid inclusion evidence for geothermal structure beneath the Southern Alps, New Zealand, N. Z. J. Geol. Geophys., 40, 43-52.
18. Cristallani, E. O., and R. W. Allmendinger (2002), Backlimb trishear: A kinematic model for curved folds developed over angular fault-bends, J. Struct. Geol., 24, 289-296.
19. Davey, F. J., et al. (1998), Preliminary results from a geophysical study across a modern continent-continent collisional plate boundary-The Southern Alps, New Zealand, Tectonophysics, 288, 221-235.
20. De Paor, D. G. (1988), Rf/Φ strain analysis using an orientation net, J. Struct. Geol., 10, 323-333.
21. Dell'Angelo, L. N., and J. Tullis (1989), Fabric development in experimentally sheared quartzites, Tectonophysics, 169, 1-21.
22. DeMets, C., R. G. Gordon, D. F. Argus, and S. Stein (1990), Current plate motions, Geophys. J. Int., 101, 425-478.
23. DeMets, C., R. G. Gordon, D. F. Argus, and S. Stein (1994), Effect of recent revisions to the geomagnetic reversal time scale on estimates of current plate motions, Geophys. Res. Lett., 21, 2191-2194.
24. Erickson, S. G., and W. R. Jamison (1995), Viscous-plastic finite-element models of fault-bend folds, J. Struct. Geol., 17, 561-573.
25. Erickson, S. G., L. M. Strayer, and J. Suppe (2001), Initiation and reactivation of faults during movement over a thrust-fault ramp: Numerical mechanical models, J. Struct. Geol., 23, 11-24.
26. Fitch, T. J. (1972), Plate convergence, transcurrent faults, and internal deformation adjacent to southeast Asia and western Pacific, J. Geophys. Res., 77, 4432-4460.
27. Flinn, D. (1979), The deformation matrix and the deformation ellipsoid, J. Struct. Geol., 1, 299-307.
28. Gleason, G. C., J. Tullis, and F. Heidelbach (1993), The role of dynamic recrystallization in the development of lattice preferred orientations in experimentally deformed quartz aggregates, J. Struct. Geol., 15, 1145-1168.
29. Grapes, R. H. (1995), Uplift and exhumation of Alpine schist, Southern Alps, New Zealand: Thermobarometric constraints, N. Z. J. Geol. Geophys., 38, 525-533.
30. Grapes, R. H., and T. Watanabe (1992), Metamorphism and uplift of the Alpine schist in the Franz-Josef Fox Glacier area of the Southern Alps, New Zealand, J. Metamorph. Geol., 10, 171-180.
31. Hirth, G., and J, Tullis (1992), Dislocation creep regimes in quartz aggregates, J. Struct. Geol., 14, 145-160.
32. Holcombe, R. J., and T. A. Little (2001), A sensitive vorticity gauge using rotated porphyroblasts, and its application to rocks adjacent to the Alpine Fault, New Zealand, J. Struct. Geol., 23, 979-990.
33. Holl, J. E., and D. J. Anastasio (1995), Kinematics around a large-scale oblique ramp, southern Pyranees, Spain, Tectonics, 14, 1368-1379.
34. Holm, D. K., R. J. Norris, and D. Craw (1989), Brittle and ductile deformation in a zone of rapid uplift: Central Southern Alps, New Zealand, Tectonics, 8, 153-168.
35. Hongn, F. D., and J. F. Hippert (2001), Quartz crystallographic and morphologic fabrics during folding/transposition in mylonites, J. Struct. Geol., 23, 81-92.
36. Jiang, D., S. Lin, and P. F. Williams (2001), Deformation path in high-strain zones, with reference to slip-partitioning in transpressional plate-boundary regions, J. Struct. Geol., 23, 991-1005.
37. Kilsdonk, B., and R. C. Fletcher (1989), An analytical model of hangingwall and footwall deformation at ramps on normal and thrust faults, Tectonophysics, 163, 153-168.
38. Kleffman, S., F. Davey, A. Melhuish, D. Okaya, and T. Stern (1998), Crustal structure in the central South Island, New Zealand, from the Lake Pukaki seismic experiment, N. Z. J. Geol. Geophys., 41, 39-49.
39. Knipe, R. J. (1985), Footwall geometry and the rheology of thrust sheets, J. Struct. Geol., 7, 1-10.
40. Koons, P. O. (1987), Some thermal and mechanical consequences of rapid uplift: An example from the Southern Alps, New Zealand, Earth Planet. Sci. Lett., 86, 307-319.
41. Koons, P. O. (1990), Two-sided orogen: Collision and erosion from the sand-box to the Southern Alps of New Zealand, Geology, 18, 679-682.
42. Koons, P. O. (1994), Three-dimensional critical wedges: Tectonics and topography in oblique collisional orogens, J. Geophys. Res., 99, 12,301-12,315.
43. Koons, P. O., and C. M. Henderson (1995), Geodetic analysis of model oblique collision and comparison to Southern Alps of New Zealand, N. Z. J. Geol. Geophys., 38, 545-552.
44. Koons, P. O., R. J. Norris, D. D. Craw, and A. F. Cooper (2003), Influence of exhumation on the structural evolution of transpressional plate boundaries: An example from the Southern Alps of New Zealand, Geology, 31, 3-6.
45. Larson, K. M., and J. Freymueller (1995), Relative motions of the Australian, Pacific and Antarctic plates estimated by the global positioning system, Geophys. Res. Lett., 22, 37-40.
46. Leitner, B., D. Eberhart-Phillips, H. Anderson, and J. L. Nabelek (2001), A focused look at the Alpine fault, New Zealand: Seismicity, focal mechanisms, and stress observations, J. Geophys. Res., 106, 2193-2220.
47. Lister, G. S., and A. W. Snoke (1984), S-C mylonites, J. Struct. Geol., 6, 617-638.
48. Little, T. A., R. J. Holcombe, and B. R. IIg (2002a), Ductile fabrics in the zone of active oblique convergence near the Alpine Fault, New Zealand: Identifying the neotectonic overprint, J. Struct. Geol., 24, 193-217.
49. Little, T. A., R. J. Holcombe, and B. R. Ilg (2002b), Kinematics of oblique continental collision inferred from ductile microstructures and strain in mid-crustal Alpine Schist, central South Island, New Zealand, J. Struct. Geol., 24, 219-239.
50. McCaffrey, R. (1992), Oblique plate convergence, slip vectors, and forearc deformation, J. Geophys. Res., 97, 8905-8915.
51. Medwedeff, D. A., and R. W. Krantz (2002), Kinematic and analog modeling of 3-D extensional ramps: Observations and a new 3-D deformation model, J. Struct. Geol., 24, 763-772.
52. Molnar, P. (1992), Brace-Goetze strength profiles, the partitioning of strike-slip and thrust faulting at zones of oblique convergence, and the stress-heat flow paradox of the San Andreas fault, in Fault Mechanics and Transport Properties at Rock, edited by B. Evans and T. F. Wong, pp. 435-459, Academic, San Diego, Calif.
53. Morse, J. D. (1977), Deformation in the ramp regions of overthrust faults: Experiments with small-scale rock models, Wyo. Geol. Soc. Annu. Field Conf. Guideb., 29th, 457-470.
54. Norris, R. J., and A. F. Cooper (1995), Origin of small-scale segmentation and transpressional thrusting along the Alpine fault, New Zealand, Geol. Soc. Am. Bull., 107, 231-240.
55. Norris, R. J., and A. F. Cooper (2001), Late Quaternary slip rates and slip-partitioning on the Alpine fault, New Zealand, J. Struct. Geol., 23, 507-520.
56. Norris, R. J., P. O. Koons, and A. F. Cooper (1990), The obliquely convergent plate boundary in the South Island of New Zealand: Implications for ancient collision zones, J. Struct. Geol., 12, 715-726.
57. Ormand, C. J., and P. J. Hudleston (1999), Analogue models of fault-bend folding: The effects of oblique ramping and tear faulting on hangingwall structures, Geol. Soc. Am. Abstr Programs, 30, Abstract 51868.
58. Owens, W. H. (1984), The calculation of a best-fit ellipsoid from elliptical sections on arbitrarily oriented planes, J. Struct. Geol., 6, 571-578.
59. Passchier, C. W., and R. A. J. Trouw (1996), Microtectonics, 289 pp., Springer, Berlin.
60. Platt, J. P. (1993), Mechanics ofoblique convergence, J. Geophys. Res., 98, 16,239-16,256.
61. Ramsay, J. G., and M. I. Huber (1983), The Techniques of Modern Structural Geology, vol. 1, Strain Analysis, Academic, San Diego, Calif.
62. Reyners, M. E., and H. Cowan (1993), The transition from subduction to continental collision: Crustal structure in the North Canterbury region, New Zealand, Geophys. J. Int., 115, 1124-1136.
63. Schreurs, G., and B. Colletta (1998), Analogue modelling of faulting in ones of continental transpression and transtension, in Continental Transpressional and Transtensional Tectonics, edited by R. Holdsworth, R. E. Strachan, and R. A. Dewey, Geol. Soc. Spec. Publ., 135, 59-79.
64. Sibson, R. H., S. H. White, and B. K. Atkinson (1981), Structure and distribution of fault rocks in the Alpine Fault Zone, New Zealand, Geol. Soc. Spec. Publ., 9, 197-210.
65. Stern, T., S. Kleffman, D. Okaya, M. Scherwath, and S. Bannister (2001), Low seismic-wave speeds and enhanced fluid pressure beneath Southern Alps of New Zealand, Geology, 29, 679-682.
66. Strayer, L. M., and P. J. Hudleston (1997), Numerical modeling of fold initiation at thrust ramps, J. Struct. Geol., 19, 551-566.
67. Tagami, M., and T. Takeshita (1999), C-axis fabrics and microstructures in quartz schist from the Sangawa metamorphic belt, central Shikoku, Japan, J. Struct. Geol., 20, 1549-1578.
68. Teyssier, C., B. Tikoff, and M. Markley (1995), Oblique plate motion and continental tectonics, Geology, 23, 447-450.
69. Tikoff, B., and H. Fossen (1999), Three-dimensional reference deformations and strain facies, J. Struct. Geol., 21, 1497-1512.
70. Tregoning, P., et al. (1998), Estimation of current plate motions in Papua New Guinea from Global Positioning System observations, J. Geophys. Res., 103, 12,181-12,203.
71. Tullis, J., and R. A. Yund (1981), Grain-growth kinetics of quartz and calcite aggregates, J. Geol., 90, 301-318.
72. Vry, J. K., R. Maas, T. A. Little, D. Phillips, R. Grapes, and M. Dixon (2004), Zoned (Cretaceous and Cenozoic) garnets and the timing of high grade metamorphism, Southern Alps, New Zealand, J. Metamorph. Geol., in press.
73. Walcott, R. I. (1998), Modes of oblique compression: Late Cenozoic tectonics of the South Island of New Zealand, Rev. Geophys., 36, 1-26.
74. Walker, N. W., and N. Mortimer (1999), Dating highgrade metamorphic mineral growth in the Haast schist using U-Pb TIMS, Geol. Soc. N. Z. Misc. Publ., 107A, 167 pp.
75. Wannamaker, P. E., G. R. Jiracek, J. A. Stodt, T. G. Caldwell, V. M. Gonzalez, J. D. McKnight, and A. D. Porter (2002), Fluid generation and pathways beneath an active compressional orogen, the New Zealand Southern Alps, inferred from inagnetotelluric data, J. Geophys. Res., 107(B6), 2117, doi:10.1029/2001JB000186.
76. Waschbusch, P., G. Batt, and C. Beaumont (1999), Subduction zone retreat and recent tectonics of the South Island of New Zealand, Tectonics, 17, 267-284.
77. Wellman, H. W. (1979), An uplift map for the South Island of New Zealand, and a model for the uplift of the Southern Alps, Bull. R. Soc. N. Z., 18, 13-20.
78. White, N., J. A. Jackson, and D. P. McKenzie (1986), The relationship between the geometry of normal faults and that of the sedimentary layers in their hangingwalls, J. Struct. Geol., 8, 879-909.
79. Wightman, R., and T. A. Little (2001), Late Cenozoic brittle-ductile deformation and fluid flow recorded in a fossil brittle-ductile transition zone, Southern Alps, New Zealand, Geol. Soc. Am. Abstr. Programs, 33(6), Abstract A51.
80. Wightman, R., and T. A. Little (2002), A fossil brittle-ductile transition zone in the central Southern Alps, New Zealand: The possibility of transciently deep brittle deformation in the Pacific Plate crust, Eos Trans. AGU, 83, West. Pac. Geophys. Meet. Suppl., Abstract SE41F-04.
81. Willet, S., C. Beaumont, and P. Fullsack (1993), Mechanical model for the tectonics of doubly vergent compressional orogens, Geology, 21, 371-374.
82. Willet, S. D., and M. T. Brandon (2002), On steady states in mountain belts, Geology, 30, 175-178.