A modeling approach to the effect of resin characteristics on parison formation in extrusion blow molding

Polymer Engineering and Science

Volumn 49, Issue 2, 2009, Pages 251-263

  Yousefi, Azizeh Mitra ^a   Den Doelder, Jaap ^b   Rainville, Marc André ^a   Koppi, Kurt A ^c  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

^b DOW BENELUX B V   (Netherlands)

^c DOW CHEMICAL COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BLOW MOLDING; DIES; EXTRUSION MOLDING; FINITE ELEMENT METHOD; FORECASTING; GEOMETRY; STRESS RELAXATION;

ACCURATE PREDICTION; BLOW MOLDED PARTS; DIE GEOMETRY; EXTRUSION BLOW MOLDING; MODELING APPROACH; MODELLING TECHNIQUES; MOLDING PROCESS; OPERATING CONDITION; PARISON FORMATION; TRIAL AND ERROR;

RESINS;

EID: 60349130153     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.21251     Document Type: Article

References (51)

1. A. Midgley and E.A. Peszel, SPE ANTEC Tech. Pap., 1131 (2002).
2. N. Orbey and J.M. Dealy, Polym. Eng. Sci., 24, 511 (1984).
3. J.M. Dealy and K.F. Wissbrun, Melt Rheology and Its Role in Plastics Processing, Van Nostrand Reinhold, New York (1990).
4. V.I. Brizitsky, G.V. Vinogradov, A.L Isayev, and Y.Y. Podolsky, J. Appl. Polym. Sci., 27, 751 (1978).
5. R.W. DiRaddo, A. Garcia-Rejon, L. Pécora, and D. Poirier, SPE ANTEC Tech. Pap., 1026 (1994).
6. N. Sheptak and C.E. Beyer, SPE J., 21, 190 (1965).
7. R.W. DiRaddo and A. Garcia-Rejon, Polym. Eng. Sci., 32, 1401 (1992).
8. A. Garcia-Rejon and J.M. Dealy, Polym. Eng. Sci., 22, 158 (1982).
9. D.V. Rosato and D.V. Rosato, Blow Molding Handbook, Hanser Publishers, New York (1989).
10. J. Vlachopoulos, Rev. Def. Beh. Mat., 3, 219 (1981).
11. M.A. Huneault, P.G. Lafieur, and P.J. Carreau, Polym. Eng. Sci., 30, 1544 (1990).
12. R.J. Koopmans, Polym. Eng. Sci., 32, 1741 (1992).
13. R.J. Koopmans, Polym. Eng. Sci., 32, 1750 (1992).
14. R.J. Koopmans, Polym. Eng. Sci., 32, 1755 (1992).
15. C.F.J, den Doelder and R.J. Koopmans, J. Non-Newtonian Fluid Mech., 152, 195 (2008).
16. P.G. de Gennes, J. Chem, Phys., 55, 572 (1971).
17. M. Doi and S.F. Edwards, The Theory of Polymer Dynamics, Clarendon Press, Oxford (1986).
18. C.C. Hua and H.Y. Kuo, J. Polym. Sci. Part B: Polym. Phys., 38, 248 (2000).
19. A.M. Yousefi, P. Collins, and R. DiRaddo, SPE ANTEC Tech. Pap., 864 (2003).
20. A.M. Yousefi, D. Laroche, P. Collins, and R. DiRaddo, SPE Blow Molding Div. Newslett. (Spring 2003). Available online: http://www. blowmoldingdivision.org/.
21. A.M. Yousefi, D. Laroche, P. Collins, and R. DiRaddo, Presented at The 6th EsaForm Conference, Salerno, Italy (2003).
22. A.M. Yousefi and H. Atsbha, Polym. Eng. Sci. (in press).
23. P. Debergue, D. Laroche, A.M. Yousefi, R. DiRaddo, and H. Atsbha, Presented at The 24th Annual Meeting of the Polymer Processing Society (PPS-24), Salerno, Italy, June 15-19 (2008).
24. F. Thibault, A.M. Yousefi, R.W. DiRaddo, and H. Atsbha, Presented at The PPS-22 Conference, Yamagata, Japan (2006).
25. A.M. Yousefi, P. Collins, S. Chang, and R.W. DiRaddo, Polym. Eng. Sci., 47, 1 (2007).
26. Z. Tadmor and CG. Gogos, Principles of Polymer Processing, SPE Monograph Series, Wiley, New York (1979).
27. M. Renardy, J. Non-Newtonian Fluid Mech., 90, 243 (2000).
28. M. Renardy, Ann. Rev. Fluid Mech., 21, 21 (1989).
29. R.S. Graham and T.C.B. McLeish, J. Rheol., 45, 275 (2001).
30. T.C.B. McLeish and R.G. Larson, J. Rheol., 42, 81 (1998).
31. M.J. Crochet and K. Walters, Ann. Rev. Fluid Mech., 15, 241 (1983).
32. F. Yurun and M.J. Crochet, J. Non-Newtonian Fluid Mech., 57, 283 (1995).
33. E. Brasseur, M.M. Fyrillas, G. Georgios, and M.J. Crochet, J. Rheol., 42, 549 (1998).
34. S. Tanoue and Y. Iemoto, Polym. Eng. Sci., 39, 2172 (1999).
35. H.X. Huang and C.M. Liao, Polym. Test., 21, 745 (2002).
36. O. Gaidai. J. den Doelder, S. de Vries, and A. van de Ven, "Extrudate Swell Analysis and Simulations for the IUPAC-LDPE Melt using the K-BKZ Model," Technical Report, Eindhoven University of Technology, The Netherlands (2005).
37. A. Kaye, College of Aeronautics, Cransfield, Note No. 134 (1962).
38. B. Bernstein, E. Kearsley, and L.J. Zapas, Trans. Soc. Rheol., 7, 391 (1963).
39. A.C. Papanastasiou, L.E. Scriven, and C.W. Macosco, J. Rheol., 27, 387 (1983).
40. E. Mitsoulis, J. Non-Newtonian Fluid Mech., 141, 138 (2007).
41. E. Mitsoulis, S.S. Abdali, and N.C. Markatos, Can. J. Chem. Eng., 71, 147 (1993).
42. M.J. Crochet, A.R. Davies, and K. Walters, Numerical Simulation of Non-Newtonian Flow, Elsevier, New York (1984).
43. J.A. Brydson, Flow Properties of Polymer Melts, George Godwin Ltd., London (1981).
44. L. Douven, Towards the Computation of Properties of Injection Moulded Products, Ph.D. Thesis, Technische Universiteit Eindhoven, The Netherlands (1991).
45. F.P.T. Baaijens, Rheol. Acta, 30, 284 (1991).
46. C.L. Tucker III, Computer Modeling for Polymer Processing- Fundamentals, Hanser Publishers, New York (1989).
47. D. Laroche, K.K. Kabanemi, L. Pecora, and R.W. DiRaddo, Polym. Eng. Sci., 39, 1223 (1999).
48. M.L. Williams, R.F. Landel, and J.D. Ferry, J. Am. Chem. Soc., 77, 3701 (1955).
49. K.K. Kabanemi, J.F. Hetu, and A. Garcia-Rejon, Int. Polym., Process., 12, 182 (1997).
50. X.L. Luo and R.I. Tanner, Int. J. Numer. Methods Eng., 25, 9 (1988).
51. M. Kurata, Towards the computation of properties of injection moulded products. Macromolecules, 17, 895 (1984).